diff options
Diffstat (limited to 'include/usb_defs.h')
| -rw-r--r-- | include/usb_defs.h | 46 |
1 files changed, 44 insertions, 2 deletions
diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544b21..4f3601a16c 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,18 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 + +/* + * Changes to Port feature numbers for Super speed, + * from USB 3.0 spec Table 10-8 + */ +#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 +#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 +#define USB_SS_PORT_FEAT_C_LINK_STATE 25 +#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 +#define USB_SS_PORT_FEAT_BH_RESET 28 +#define USB_SS_PORT_FEAT_C_BH_RESET 29 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001 @@ -218,9 +242,19 @@ #define USB_PORT_STAT_POWER 0x0100 #define USB_PORT_STAT_LOW_SPEED 0x0200 #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SPEED \ +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK \ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) +/* + * Changes to wPortStatus bit field in USB 3.0 + * See USB 3.0 spec Table 10-11 + */ +#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 + /* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001 #define USB_PORT_STAT_C_ENABLE 0x0002 @@ -228,13 +262,21 @@ #define USB_PORT_STAT_C_OVERCURRENT 0x0008 #define USB_PORT_STAT_C_RESET 0x0010 +/* + * Changes to wPortChange bit fields in USB 3.0 + * See USB 3.0 spec Table 10-12 + */ +#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 +#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 + /* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003 #define HUB_CHAR_COMPOUND 0x0004 #define HUB_CHAR_OCPM 0x0018 /* - *Hub Status & Hub Change bit masks + * Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001 #define HUB_STATUS_OVERCURRENT 0x0002 |