diff options
Diffstat (limited to 'include/xen/interface/io/blkif.h')
-rw-r--r-- | include/xen/interface/io/blkif.h | 701 |
1 files changed, 701 insertions, 0 deletions
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h new file mode 100644 index 0000000000..38b4d7c73b --- /dev/null +++ b/include/xen/interface/io/blkif.h @@ -0,0 +1,701 @@ +/* SPDX-License-Identifier: MIT + * + * blkif.h + * + * Unified block-device I/O interface for Xen guest OSes. + * + * Copyright (c) 2003-2004, Keir Fraser + * Copyright (c) 2012, Spectra Logic Corporation + */ + +#ifndef __XEN_PUBLIC_IO_BLKIF_H__ +#define __XEN_PUBLIC_IO_BLKIF_H__ + +#include "ring.h" +#include "../grant_table.h" + +/* + * Front->back notifications: When enqueuing a new request, sending a + * notification can be made conditional on req_event (i.e., the generic + * hold-off mechanism provided by the ring macros). Backends must set + * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()). + * + * Back->front notifications: When enqueuing a new response, sending a + * notification can be made conditional on rsp_event (i.e., the generic + * hold-off mechanism provided by the ring macros). Frontends must set + * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()). + */ + +#ifndef blkif_vdev_t +#define blkif_vdev_t u16 +#endif +#define blkif_sector_t u64 + +/* + * Feature and Parameter Negotiation + * ================================= + * The two halves of a Xen block driver utilize nodes within the XenStore to + * communicate capabilities and to negotiate operating parameters. This + * section enumerates these nodes which reside in the respective front and + * backend portions of the XenStore, following the XenBus convention. + * + * All data in the XenStore is stored as strings. Nodes specifying numeric + * values are encoded in decimal. Integer value ranges listed below are + * expressed as fixed sized integer types capable of storing the conversion + * of a properly formated node string, without loss of information. + * + * Any specified default value is in effect if the corresponding XenBus node + * is not present in the XenStore. + * + * XenStore nodes in sections marked "PRIVATE" are solely for use by the + * driver side whose XenBus tree contains them. + * + * XenStore nodes marked "DEPRECATED" in their notes section should only be + * used to provide interoperability with legacy implementations. + * + * See the XenBus state transition diagram below for details on when XenBus + * nodes must be published and when they can be queried. + * + ***************************************************************************** + * Backend XenBus Nodes + ***************************************************************************** + * + *------------------ Backend Device Identification (PRIVATE) ------------------ + * + * mode + * Values: "r" (read only), "w" (writable) + * + * The read or write access permissions to the backing store to be + * granted to the frontend. + * + * params + * Values: string + * + * A free formatted string providing sufficient information for the + * hotplug script to attach the device and provide a suitable + * handler (ie: a block device) for blkback to use. + * + * physical-device + * Values: "MAJOR:MINOR" + * Notes: 11 + * + * MAJOR and MINOR are the major number and minor number of the + * backing device respectively. + * + * physical-device-path + * Values: path string + * + * A string that contains the absolute path to the disk image. On + * NetBSD and Linux this is always a block device, while on FreeBSD + * it can be either a block device or a regular file. + * + * type + * Values: "file", "phy", "tap" + * + * The type of the backing device/object. + * + * + * direct-io-safe + * Values: 0/1 (boolean) + * Default Value: 0 + * + * The underlying storage is not affected by the direct IO memory + * lifetime bug. See: + * http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html + * + * Therefore this option gives the backend permission to use + * O_DIRECT, notwithstanding that bug. + * + * That is, if this option is enabled, use of O_DIRECT is safe, + * in circumstances where we would normally have avoided it as a + * workaround for that bug. This option is not relevant for all + * backends, and even not necessarily supported for those for + * which it is relevant. A backend which knows that it is not + * affected by the bug can ignore this option. + * + * This option doesn't require a backend to use O_DIRECT, so it + * should not be used to try to control the caching behaviour. + * + *--------------------------------- Features --------------------------------- + * + * feature-barrier + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_WRITE_BARRIER request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-flush-cache + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_FLUSH_DISKCACHE request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-discard + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_DISCARD request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-persistent + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 7 + * + * A value of "1" indicates that the backend can keep the grants used + * by the frontend driver mapped, so the same set of grants should be + * used in all transactions. The maximum number of grants the backend + * can map persistently depends on the implementation, but ideally it + * should be RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. Using this + * feature the backend doesn't need to unmap each grant, preventing + * costly TLB flushes. The backend driver should only map grants + * persistently if the frontend supports it. If a backend driver chooses + * to use the persistent protocol when the frontend doesn't support it, + * it will probably hit the maximum number of persistently mapped grants + * (due to the fact that the frontend won't be reusing the same grants), + * and fall back to non-persistent mode. Backend implementations may + * shrink or expand the number of persistently mapped grants without + * notifying the frontend depending on memory constraints (this might + * cause a performance degradation). + * + * If a backend driver wants to limit the maximum number of persistently + * mapped grants to a value less than RING_SIZE * + * BLKIF_MAX_SEGMENTS_PER_REQUEST a LRU strategy should be used to + * discard the grants that are less commonly used. Using a LRU in the + * backend driver paired with a LIFO queue in the frontend will + * allow us to have better performance in this scenario. + * + *----------------------- Request Transport Parameters ------------------------ + * + * max-ring-page-order + * Values: <uint32_t> + * Default Value: 0 + * Notes: 1, 3 + * + * The maximum supported size of the request ring buffer in units of + * lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages, + * etc.). + * + * max-ring-pages + * Values: <uint32_t> + * Default Value: 1 + * Notes: DEPRECATED, 2, 3 + * + * The maximum supported size of the request ring buffer in units of + * machine pages. The value must be a power of 2. + * + *------------------------- Backend Device Properties ------------------------- + * + * discard-enable + * Values: 0/1 (boolean) + * Default Value: 1 + * + * This optional property, set by the toolstack, instructs the backend + * to offer (or not to offer) discard to the frontend. If the property + * is missing the backend should offer discard if the backing storage + * actually supports it. + * + * discard-alignment + * Values: <uint32_t> + * Default Value: 0 + * Notes: 4, 5 + * + * The offset, in bytes from the beginning of the virtual block device, + * to the first, addressable, discard extent on the underlying device. + * + * discard-granularity + * Values: <uint32_t> + * Default Value: <"sector-size"> + * Notes: 4 + * + * The size, in bytes, of the individually addressable discard extents + * of the underlying device. + * + * discard-secure + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 10 + * + * A value of "1" indicates that the backend can process BLKIF_OP_DISCARD + * requests with the BLKIF_DISCARD_SECURE flag set. + * + * info + * Values: <uint32_t> (bitmap) + * + * A collection of bit flags describing attributes of the backing + * device. The VDISK_* macros define the meaning of each bit + * location. + * + * sector-size + * Values: <uint32_t> + * + * The logical block size, in bytes, of the underlying storage. This + * must be a power of two with a minimum value of 512. + * + * NOTE: Because of implementation bugs in some frontends this must be + * set to 512, unless the frontend advertizes a non-zero value + * in its "feature-large-sector-size" xenbus node. (See below). + * + * physical-sector-size + * Values: <uint32_t> + * Default Value: <"sector-size"> + * + * The physical block size, in bytes, of the backend storage. This + * must be an integer multiple of "sector-size". + * + * sectors + * Values: <u64> + * + * The size of the backend device, expressed in units of "sector-size". + * The product of "sector-size" and "sectors" must also be an integer + * multiple of "physical-sector-size", if that node is present. + * + ***************************************************************************** + * Frontend XenBus Nodes + ***************************************************************************** + * + *----------------------- Request Transport Parameters ----------------------- + * + * event-channel + * Values: <uint32_t> + * + * The identifier of the Xen event channel used to signal activity + * in the ring buffer. + * + * ring-ref + * Values: <uint32_t> + * Notes: 6 + * + * The Xen grant reference granting permission for the backend to map + * the sole page in a single page sized ring buffer. + * + * ring-ref%u + * Values: <uint32_t> + * Notes: 6 + * + * For a frontend providing a multi-page ring, a "number of ring pages" + * sized list of nodes, each containing a Xen grant reference granting + * permission for the backend to map the page of the ring located + * at page index "%u". Page indexes are zero based. + * + * protocol + * Values: string (XEN_IO_PROTO_ABI_*) + * Default Value: XEN_IO_PROTO_ABI_NATIVE + * + * The machine ABI rules governing the format of all ring request and + * response structures. + * + * ring-page-order + * Values: <uint32_t> + * Default Value: 0 + * Maximum Value: MAX(ffs(max-ring-pages) - 1, max-ring-page-order) + * Notes: 1, 3 + * + * The size of the frontend allocated request ring buffer in units + * of lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages, + * etc.). + * + * num-ring-pages + * Values: <uint32_t> + * Default Value: 1 + * Maximum Value: MAX(max-ring-pages,(0x1 << max-ring-page-order)) + * Notes: DEPRECATED, 2, 3 + * + * The size of the frontend allocated request ring buffer in units of + * machine pages. The value must be a power of 2. + * + *--------------------------------- Features --------------------------------- + * + * feature-persistent + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 7, 8, 9 + * + * A value of "1" indicates that the frontend will reuse the same grants + * for all transactions, allowing the backend to map them with write + * access (even when it should be read-only). If the frontend hits the + * maximum number of allowed persistently mapped grants, it can fallback + * to non persistent mode. This will cause a performance degradation, + * since the the backend driver will still try to map those grants + * persistently. Since the persistent grants protocol is compatible with + * the previous protocol, a frontend driver can choose to work in + * persistent mode even when the backend doesn't support it. + * + * It is recommended that the frontend driver stores the persistently + * mapped grants in a LIFO queue, so a subset of all persistently mapped + * grants gets used commonly. This is done in case the backend driver + * decides to limit the maximum number of persistently mapped grants + * to a value less than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. + * + * feature-large-sector-size + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the frontend will correctly supply and + * interpret all sector-based quantities in terms of the "sector-size" + * value supplied in the backend info, whatever that may be set to. + * If this node is not present or its value is "0" then it is assumed + * that the frontend requires that the logical block size is 512 as it + * is hardcoded (which is the case in some frontend implementations). + * + *------------------------- Virtual Device Properties ------------------------- + * + * device-type + * Values: "disk", "cdrom", "floppy", etc. + * + * virtual-device + * Values: <uint32_t> + * + * A value indicating the physical device to virtualize within the + * frontend's domain. (e.g. "The first ATA disk", "The third SCSI + * disk", etc.) + * + * See docs/misc/vbd-interface.txt for details on the format of this + * value. + * + * Notes + * ----- + * (1) Multi-page ring buffer scheme first developed in the Citrix XenServer + * PV drivers. + * (2) Multi-page ring buffer scheme first used in some RedHat distributions + * including a distribution deployed on certain nodes of the Amazon + * EC2 cluster. + * (3) Support for multi-page ring buffers was implemented independently, + * in slightly different forms, by both Citrix and RedHat/Amazon. + * For full interoperability, block front and backends should publish + * identical ring parameters, adjusted for unit differences, to the + * XenStore nodes used in both schemes. + * (4) Devices that support discard functionality may internally allocate space + * (discardable extents) in units that are larger than the exported logical + * block size. If the backing device has such discardable extents the + * backend should provide both discard-granularity and discard-alignment. + * Providing just one of the two may be considered an error by the frontend. + * Backends supporting discard should include discard-granularity and + * discard-alignment even if it supports discarding individual sectors. + * Frontends should assume discard-alignment == 0 and discard-granularity + * == sector size if these keys are missing. + * (5) The discard-alignment parameter allows a physical device to be + * partitioned into virtual devices that do not necessarily begin or + * end on a discardable extent boundary. + * (6) When there is only a single page allocated to the request ring, + * 'ring-ref' is used to communicate the grant reference for this + * page to the backend. When using a multi-page ring, the 'ring-ref' + * node is not created. Instead 'ring-ref0' - 'ring-refN' are used. + * (7) When using persistent grants data has to be copied from/to the page + * where the grant is currently mapped. The overhead of doing this copy + * however doesn't suppress the speed improvement of not having to unmap + * the grants. + * (8) The frontend driver has to allow the backend driver to map all grants + * with write access, even when they should be mapped read-only, since + * further requests may reuse these grants and require write permissions. + * (9) Linux implementation doesn't have a limit on the maximum number of + * grants that can be persistently mapped in the frontend driver, but + * due to the frontent driver implementation it should never be bigger + * than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. + *(10) The discard-secure property may be present and will be set to 1 if the + * backing device supports secure discard. + *(11) Only used by Linux and NetBSD. + */ + +/* + * Multiple hardware queues/rings: + * If supported, the backend will write the key "multi-queue-max-queues" to + * the directory for that vbd, and set its value to the maximum supported + * number of queues. + * Frontends that are aware of this feature and wish to use it can write the + * key "multi-queue-num-queues" with the number they wish to use, which must be + * greater than zero, and no more than the value reported by the backend in + * "multi-queue-max-queues". + * + * For frontends requesting just one queue, the usual event-channel and + * ring-ref keys are written as before, simplifying the backend processing + * to avoid distinguishing between a frontend that doesn't understand the + * multi-queue feature, and one that does, but requested only one queue. + * + * Frontends requesting two or more queues must not write the toplevel + * event-channel and ring-ref keys, instead writing those keys under sub-keys + * having the name "queue-N" where N is the integer ID of the queue/ring for + * which those keys belong. Queues are indexed from zero. + * For example, a frontend with two queues must write the following set of + * queue-related keys: + * + * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2" + * /local/domain/1/device/vbd/0/queue-0 = "" + * /local/domain/1/device/vbd/0/queue-0/ring-ref = "<ring-ref#0>" + * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>" + * /local/domain/1/device/vbd/0/queue-1 = "" + * /local/domain/1/device/vbd/0/queue-1/ring-ref = "<ring-ref#1>" + * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>" + * + * It is also possible to use multiple queues/rings together with + * feature multi-page ring buffer. + * For example, a frontend requests two queues/rings and the size of each ring + * buffer is two pages must write the following set of related keys: + * + * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2" + * /local/domain/1/device/vbd/0/ring-page-order = "1" + * /local/domain/1/device/vbd/0/queue-0 = "" + * /local/domain/1/device/vbd/0/queue-0/ring-ref0 = "<ring-ref#0>" + * /local/domain/1/device/vbd/0/queue-0/ring-ref1 = "<ring-ref#1>" + * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>" + * /local/domain/1/device/vbd/0/queue-1 = "" + * /local/domain/1/device/vbd/0/queue-1/ring-ref0 = "<ring-ref#2>" + * /local/domain/1/device/vbd/0/queue-1/ring-ref1 = "<ring-ref#3>" + * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>" + * + */ + +/* + * STATE DIAGRAMS + * + ***************************************************************************** + * Startup * + ***************************************************************************** + * + * Tool stack creates front and back nodes with state XenbusStateInitialising. + * + * Front Back + * ================================= ===================================== + * XenbusStateInitialising XenbusStateInitialising + * o Query virtual device o Query backend device identification + * properties. data. + * o Setup OS device instance. o Open and validate backend device. + * o Publish backend features and + * transport parameters. + * | + * | + * V + * XenbusStateInitWait + * + * o Query backend features and + * transport parameters. + * o Allocate and initialize the + * request ring. + * o Publish transport parameters + * that will be in effect during + * this connection. + * | + * | + * V + * XenbusStateInitialised + * + * o Query frontend transport parameters. + * o Connect to the request ring and + * event channel. + * o Publish backend device properties. + * | + * | + * V + * XenbusStateConnected + * + * o Query backend device properties. + * o Finalize OS virtual device + * instance. + * | + * | + * V + * XenbusStateConnected + * + * Note: Drivers that do not support any optional features, or the negotiation + * of transport parameters, can skip certain states in the state machine: + * + * o A frontend may transition to XenbusStateInitialised without + * waiting for the backend to enter XenbusStateInitWait. In this + * case, default transport parameters are in effect and any + * transport parameters published by the frontend must contain + * their default values. + * + * o A backend may transition to XenbusStateInitialised, bypassing + * XenbusStateInitWait, without waiting for the frontend to first + * enter the XenbusStateInitialised state. In this case, default + * transport parameters are in effect and any transport parameters + * published by the backend must contain their default values. + * + * Drivers that support optional features and/or transport parameter + * negotiation must tolerate these additional state transition paths. + * In general this means performing the work of any skipped state + * transition, if it has not already been performed, in addition to the + * work associated with entry into the current state. + */ + +/* + * REQUEST CODES. + */ +#define BLKIF_OP_READ 0 +#define BLKIF_OP_WRITE 1 +/* + * All writes issued prior to a request with the BLKIF_OP_WRITE_BARRIER + * operation code ("barrier request") must be completed prior to the + * execution of the barrier request. All writes issued after the barrier + * request must not execute until after the completion of the barrier request. + * + * Optional. See "feature-barrier" XenBus node documentation above. + */ +#define BLKIF_OP_WRITE_BARRIER 2 +/* + * Commit any uncommitted contents of the backing device's volatile cache + * to stable storage. + * + * Optional. See "feature-flush-cache" XenBus node documentation above. + */ +#define BLKIF_OP_FLUSH_DISKCACHE 3 +/* + * Used in SLES sources for device specific command packet + * contained within the request. Reserved for that purpose. + */ +#define BLKIF_OP_RESERVED_1 4 +/* + * Indicate to the backend device that a region of storage is no longer in + * use, and may be discarded at any time without impact to the client. If + * the BLKIF_DISCARD_SECURE flag is set on the request, all copies of the + * discarded region on the device must be rendered unrecoverable before the + * command returns. + * + * This operation is analogous to performing a trim (ATA) or unamp (SCSI), + * command on a native device. + * + * More information about trim/unmap operations can be found at: + * http://t13.org/Documents/UploadedDocuments/docs2008/ + * e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc + * http://www.seagate.com/staticfiles/support/disc/manuals/ + * Interface%20manuals/100293068c.pdf + * + * Optional. See "feature-discard", "discard-alignment", + * "discard-granularity", and "discard-secure" in the XenBus node + * documentation above. + */ +#define BLKIF_OP_DISCARD 5 + +/* + * Recognized if "feature-max-indirect-segments" in present in the backend + * xenbus info. The "feature-max-indirect-segments" node contains the maximum + * number of segments allowed by the backend per request. If the node is + * present, the frontend might use blkif_request_indirect structs in order to + * issue requests with more than BLKIF_MAX_SEGMENTS_PER_REQUEST (11). The + * maximum number of indirect segments is fixed by the backend, but the + * frontend can issue requests with any number of indirect segments as long as + * it's less than the number provided by the backend. The indirect_grefs field + * in blkif_request_indirect should be filled by the frontend with the + * grant references of the pages that are holding the indirect segments. + * These pages are filled with an array of blkif_request_segment that hold the + * information about the segments. The number of indirect pages to use is + * determined by the number of segments an indirect request contains. Every + * indirect page can contain a maximum of + * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to + * calculate the number of indirect pages to use we have to do + * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))). + * + * If a backend does not recognize BLKIF_OP_INDIRECT, it should *not* + * create the "feature-max-indirect-segments" node! + */ +#define BLKIF_OP_INDIRECT 6 + +/* + * Maximum scatter/gather segments per request. + * This is carefully chosen so that sizeof(blkif_ring_t) <= PAGE_SIZE. + * NB. This could be 12 if the ring indexes weren't stored in the same page. + */ +#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11 + +/* + * Maximum number of indirect pages to use per request. + */ +#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8 + +/* + * NB. 'first_sect' and 'last_sect' in blkif_request_segment, as well as + * 'sector_number' in blkif_request, blkif_request_discard and + * blkif_request_indirect are sector-based quantities. See the description + * of the "feature-large-sector-size" frontend xenbus node above for + * more information. + */ +struct blkif_request_segment { + grant_ref_t gref; /* reference to I/O buffer frame */ + /* @first_sect: first sector in frame to transfer (inclusive). */ + /* @last_sect: last sector in frame to transfer (inclusive). */ + u8 first_sect, last_sect; +}; + +/* + * Starting ring element for any I/O request. + */ +struct blkif_request { + u8 operation; /* BLKIF_OP_??? */ + u8 nr_segments; /* number of segments */ + blkif_vdev_t handle; /* only for read/write requests */ + u64 id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */ + struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST]; +}; + +/* + * Cast to this structure when blkif_request.operation == BLKIF_OP_DISCARD + * sizeof(struct blkif_request_discard) <= sizeof(struct blkif_request) + */ +struct blkif_request_discard { + u8 operation; /* BLKIF_OP_DISCARD */ + u8 flag; /* BLKIF_DISCARD_SECURE or zero */ +#define BLKIF_DISCARD_SECURE (1 << 0) /* ignored if discard-secure=0 */ + blkif_vdev_t handle; /* same as for read/write requests */ + u64 id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk */ + u64 nr_sectors; /* number of contiguous sectors to discard*/ +}; + +struct blkif_request_indirect { + u8 operation; /* BLKIF_OP_INDIRECT */ + u8 indirect_op; /* BLKIF_OP_{READ/WRITE} */ + u16 nr_segments; /* number of segments */ + u64 id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */ + blkif_vdev_t handle; /* same as for read/write requests */ + grant_ref_t indirect_grefs[BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST]; +#ifdef __i386__ + u64 pad; /* Make it 64 byte aligned on i386 */ +#endif +}; + +struct blkif_response { + u64 id; /* copied from request */ + u8 operation; /* copied from request */ + s16 status; /* BLKIF_RSP_??? */ +}; + +/* + * STATUS RETURN CODES. + */ + /* Operation not supported (only happens on barrier writes). */ +#define BLKIF_RSP_EOPNOTSUPP -2 + /* Operation failed for some unspecified reason (-EIO). */ +#define BLKIF_RSP_ERROR -1 + /* Operation completed successfully. */ +#define BLKIF_RSP_OKAY 0 + +/* + * Generate blkif ring structures and types. + */ +DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response); + +#define VDISK_CDROM 0x1 +#define VDISK_REMOVABLE 0x2 +#define VDISK_READONLY 0x4 + +#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */ + +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * tab-width: 4 + * indent-tabs-mode: nil + * End: + */ |