diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/CPCI750.h | 609 | ||||
| -rw-r--r-- | include/configs/DB64360.h | 579 | ||||
| -rw-r--r-- | include/configs/DB64460.h | 517 | ||||
| -rw-r--r-- | include/configs/p3mx.h | 434 |
4 files changed, 0 insertions, 2139 deletions
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h deleted file mode 100644 index 304a12bea9..0000000000 --- a/include/configs/CPCI750.h +++ /dev/null @@ -1,609 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/************************************************************************* - * (c) 2004 esd gmbh Hannover - * - * - * from db64360.h file - * by Reinhard Arlt reinhard.arlt@esd-electronics.com - * - ************************************************************************/ - - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* This define must be before the core.h include */ -#define CONFIG_CPCI750 1 /* this is an CPCI750 board */ - -#ifndef __ASSEMBLY__ -#include <../board/Marvell/include/core.h> -#endif -/*-----------------------------------------------------*/ - -#include "../board/esd/cpci750/local.h" - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_750FX /* we have a 750FX (override local.h) */ - -#define CONFIG_CPCI750 1 /* this is an CPCI750 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ - -#define CONFIG_MV64360_ECC /* enable ECC support */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* which initialization functions to call for this board */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_BOARD_EARLY_INIT_F 1 - -#define CONFIG_SYS_BOARD_NAME "CPCI750" -#define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" - -/*#define CONFIG_SYS_HUSH_PARSER*/ -#define CONFIG_SYS_HUSH_PARSER - - -#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -/* Define which ETH port will be used for connecting the network */ -#define CONFIG_SYS_ETH_PORT ETH_0 - -/* - * The following defines let you select what serial you want to use - * for your console driver. - * - * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 - * to 0 below. - * - * to use the MPSC, #define CONFIG_MPSC. If you have wired up another - * mpsc channel, change CONFIG_MPSC_PORT to the desired value. - */ -#define CONFIG_MPSC -#define CONFIG_MPSC_PORT 0 - -/* to change the default ethernet port, use this define (options: 0, 1, 2) */ -#define MV_ETH_DEVS 1 -#define CONFIG_ETHER_PORT 0 - -#undef CONFIG_ETHER_PORT_MII /* use RMII */ - -#define CONFIG_BOOTDELAY 5 /* autoboot disabled */ - -#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK - - -#undef CONFIG_BOOTARGS - -/* ----------------------------------------------------------------------------- - * New bootcommands for Marvell CPCI750 c 2002 Ingo Assmus - */ - -#define CONFIG_IPADDR "192.168.0.185" - -#define CONFIG_SERIAL "AA000001" -#define CONFIG_SERVERIP "10.0.0.79" -#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" - -#define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n -#define CONFIG_TESETDRAMWALK n - -/* ----------------------------------------------------------------------------- */ - - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_PCI -#define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - - -#define CONFIG_DOS_PARTITION - -#define CONFIG_USE_CPCIDVI - -#ifdef CONFIG_USE_CPCIDVI -#define CONFIG_VIDEO -#define CONFIG_VIDEO_CT69000 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VIDEO_LOGO -#define CONFIG_I8042_KBD -#define CONFIG_SYS_ISA_IO 0 -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */ - -#define CONFIG_PRAM 0 - -#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */ -/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -/*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ - -/* -#define CONFIG_SYS_DRAM_TEST - * DRAM tests - * CONFIG_SYS_DRAM_TEST - enables the following tests. - * - * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. - */ -#define CONFIG_SYS_DRAM_TEST -#if defined(CONFIG_SYS_DRAM_TEST) -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CONFIG_SYS_DRAM_TEST_DATA -#define CONFIG_SYS_DRAM_TEST_ADDRESS -#define CONFIG_SYS_DRAM_TEST_WALK -#endif /* CONFIG_SYS_DRAM_TEST */ - -#define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ -#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ - -#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_TCLK 133000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - - /* - * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS - * To an unused memory region. The stack will remain in cache until RAM - * is initialized -*/ -#undef CONFIG_SYS_INIT_RAM_LOCK -/* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ -/* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define RELOCATE_INTERNAL_RAM_ADDR -#ifdef RELOCATE_INTERNAL_RAM_ADDR -/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/ -#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000 -#endif - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Dummies for BAT 4-7 */ -#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CONFIG_SYS_SDRAM2_BASE 0x20000000 -#define CONFIG_SYS_SDRAM3_BASE 0x30000000 -#define CONFIG_SYS_SDRAM4_BASE 0x40000000 -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE 0xfff00000 -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \ - CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \ - CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT } -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */ - -/* areas to map different things with the GT in physical space */ -#define CONFIG_SYS_DRAM_BANKS 4 - -/* What to put in the bats. */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -/* Peripheral Device section */ - -/*******************************************************/ -/* We have on the cpci750 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ -/*******************************************************/ -#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ - -#undef MARVEL_STANDARD_CFG -#ifndef MARVEL_STANDARD_CFG -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ -/*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ -#define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */ - -#define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */ -#define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */ -#define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */ -#define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ -#define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ - -#define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */ -#define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */ -#define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */ -#define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */ -#define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */ - -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#endif - -/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ -#define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */ -#define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ - - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ - /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ - - -/* MPP Control MV64360 Appendix P P. 632*/ -#define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */ -#define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */ -#define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */ -#define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */ -/* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */ - - -#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ - -/* setup new config_value for MV64360 DDR-RAM To_do !! */ -/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */ -/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */ - /* GB has high prio. - idma has low prio - MPSC has low prio - pci has low prio 1 and 2 - cpu has high prio - Data DQS pins == eight (DQS[7:0] foe x8 and x16 devices - ECC disable - non registered DRAM */ - /* 31:26 25:22 21:20 19 18 17 16 */ - /* 100001 0000 010 0 0 0 0 */ - /* refresh_count=0x400 - phisical interleaving disable - virtual interleaving enable */ - /* 15 14 13:0 */ - /* 0 1 0x400 */ -# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ - -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 - -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) - -#if defined (CONFIG_750CX) -#define CONFIG_SYS_PCI_IDSEL 0x0 -#else -#define CONFIG_SYS_PCI_IDSEL 0x30 -#endif - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ -#ifndef __ASSEMBLY__ -int ata_device(int dev); -#endif -#define ATA_DEVICE(dev) ata_device(dev) -#define CONFIG_ATAPI 1 - -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 in one BAT */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7) - * IBAT4 and DBAT4 - * FIXME: ingo disable BATs for Linux Kernel - */ -/* #undef SETUP_HIGH_BATS_FX750 */ /* don't initialize BATS 4-7 */ -#define SETUP_HIGH_BATS_FX750 /* initialize BATS 4-7 */ - -#ifdef SETUP_HIGH_BATS_FX750 -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* IBAT5 and DBAT5 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -/* IBAT6 and DBAT6 */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* IBAT7 and DBAT7 */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#else /* set em out of range for Linux !!!!!!!!!!! */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* IBAT5 and DBAT5 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U - -/* IBAT6 and DBAT6 */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U - -/* IBAT7 and DBAT7 */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U - -#endif -/* FIXME: ingo end: disable BATs for Linux Kernel */ - -/* I2C addresses for the two DIMM SPD chips */ -#define DIMM0_I2C_ADDR 0x51 -#define DIMM1_I2C_ADDR 0x52 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ - -#if 0 -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ -#endif - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x050 -#define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ - -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/mpc74xx.h for the defines used here - */ - -/*#define CONFIG_SYS_L2*/ -#undef CONFIG_SYS_L2 - -/* #ifdef CONFIG_750CX*/ -#if defined (CONFIG_750CX) || defined (CONFIG_750FX) -#define L2_INIT 0 -#else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -#define CONFIG_SYS_BOARD_ASM_INIT 1 - -#define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1) -#define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0) -#define CONFIG_SYS_PLD_VER 0xf0e00000 - -#define CONFIG_OF_LIBFDT 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h deleted file mode 100644 index b77c8b2894..0000000000 --- a/include/configs/DB64360.h +++ /dev/null @@ -1,579 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/************************************************************************* - * (c) 2002 Datentechnik AG - Project: Dino - * - * - * $Id: DB64360.h,v 1.3 2003/04/26 04:58:13 brad Exp $ - * - ************************************************************************/ - -/************************************************************************* - * - * History: - * - * $Log: DB64360.h,v $ - * Revision 1.3 2003/04/26 04:58:13 brad - * Cosmetic changes and compiler warning cleanups - * - * Revision 1.2 2003/04/23 15:48:15 ingo - * mem. map output added - * - * Revision 1.1 2003/04/17 09:31:42 ias - * keymile changes 17_04_2003 - * - * Revision 1.10 2003/03/06 12:25:04 ias - * 750 FX CPU HID settings updated - * - * Revision 1.9 2003/03/03 16:14:36 ias - * cleanup compiler warnings of printf fuctions - * - * Revision 1.8 2003/03/03 15:11:44 ias - * Marvell MPSC-UART is working - * - * Revision 1.7 2003/02/26 12:15:45 ssu - * adapted default parameters to new board flash address - * - * Revision 1.6 2003/02/25 14:55:42 ssu - * changed default environment parameters - * - * Revision 1.5 2003/02/21 17:14:23 ias - * added extended SPD handling - * - * Revision 1.4 2003/01/14 09:16:08 ias - * PPCBoot for Marvel Beta 0.9 - * - * Revision 1.3 2002/12/03 13:56:26 ias - * Environment in flash support added - * - * Revision 1.2 2002/11/29 16:53:29 ias - * Flash support for STM added - * - * Revision 1.1 2002/11/29 13:36:31 ias - * Revision 0.1 of PPCBOOT (1.1.5) for Marvell DB64360 IBM750FX Board - * - working DDRRAM (only 32MByte of 128MB Modul) - * - working I2C Driver for SPD EEPROM read - * - working DUART 16650 for Serial Console - * - working "console" - * - * - * - ************************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* This define must be before the core.h include */ -#define CONFIG_DB64360 1 /* this is an DB64360 board */ - -#ifndef __ASSEMBLY__ -#include "../board/Marvell/include/core.h" -#endif - -/*-----------------------------------------------------*/ -/* #include "../board/db64360/local.h" */ -#ifndef __LOCAL_H -#define __LOCAL_H - -/* first ethernet */ -#define CONFIG_ETHADDR 64:36:00:00:00:01 - /* next two ethernet hwaddrs */ -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 64:36:00:00:00:02 -/* in the atlantis 64360 we have only 2 ETH port on the board, -if we use PCI it has its own MAC addr */ - -#define CONFIG_ENV_OVERWRITE -#endif /* __CONFIG_H */ - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_74xx /* we have a 750FX (override local.h) */ - -#define CONFIG_DB64360 1 /* this is an DB64360 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ -/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the - DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. - so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase, - see sdram_init.c */ -#undef CONFIG_ECC /* enable ECC support */ -#define CONFIG_MV64360_ECC - -/* which initialization functions to call for this board */ -#define CONFIG_MISC_INIT_R /* initialize the icache L1 */ -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_BOARD_NAME "DB64360" -#define CONFIG_IDENT_STRING "Marvell DB64360 (1.1)" - -/*#define CONFIG_SYS_HUSH_PARSER */ -#undef CONFIG_SYS_HUSH_PARSER - - -/* - * The following defines let you select what serial you want to use - * for your console driver. - * - * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 - * to 0 below. - * - * to use the MPSC, #define CONFIG_MPSC. If you have wired up another - * mpsc channel, change CONFIG_MPSC_PORT to the desired value. - */ - -#define CONFIG_MPSC_PORT 0 - -/* to change the default ethernet port, use this define (options: 0, 1, 2) */ -#define MV_ETH_DEVS 2 - -/* #undef CONFIG_ETHER_PORT_MII */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK - - -#undef CONFIG_BOOTARGS -/*#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */ - -/* ronen - autoboot using tftp */ -#if (CONFIG_BOOTDELAY >= 0) -#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 uImage;\ - setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \ - ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000; " - -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#endif - -/* ronen - the u-boot.bin should be ~0x30000 bytes */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \ - "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \ - "bootargs_root=root=/dev/nfs rw\0" \ - "bootargs_end=:::DB64360:eth0:none \0"\ - "ethprime=mv_enet0\0"\ - "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \ -ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" - -/* --------------------------------------------------------------------------------------------------------------- */ -/* New bootcommands for Marvell DB64360 c 2002 Ingo Assmus */ - -#define CONFIG_IPADDR 10.2.40.90 - -#define CONFIG_SERIAL "No. 1" -#define CONFIG_SERVERIP 10.2.1.126 -#define CONFIG_ROOTPATH "/mnt/yellow_dog_mini" - - -#define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n -#define CONFIG_TESETDRAMWALK n - -/* --------------------------------------------------------------------------------------------------------------- */ - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ - -/* Use first bank for JFFS2, second bank contains U-Boot. - * - * Note: fake mtd_id's used, no linux mtd map file. - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=db64360-1" -#define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" -*/ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */ - -/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/*#define CONFIG_SYS_MEMTEST_START 0x00400000 memtest works on */ -/*#define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -/*#define CONFIG_SYS_MEMTEST_END 0x07c00000 4 ... 124 MB in DRAM */ - -/* -#define CONFIG_SYS_DRAM_TEST - * DRAM tests - * CONFIG_SYS_DRAM_TEST - enables the following tests. - * - * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. - */ -#define CONFIG_SYS_DRAM_TEST -#if defined(CONFIG_SYS_DRAM_TEST) -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -/* #define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CONFIG_SYS_DRAM_TEST_DATA -#define CONFIG_SYS_DRAM_TEST_ADDRESS -#define CONFIG_SYS_DRAM_TEST_WALK -#endif /* CONFIG_SYS_DRAM_TEST */ - -#undef CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ -#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ - -#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ - -/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ -#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ - -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */ -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */ - -/*ronen - this is the Tclk (MV64360 core) */ -#define CONFIG_SYS_TCLK 133000000 - - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_750FX_HID0 0x8000c084 -#define CONFIG_SYS_750FX_HID1 0x54800000 -#define CONFIG_SYS_750FX_HID2 0x00000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* - * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS - * To an unused memory region. The stack will remain in cache until RAM - * is initialized -*/ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define RELOCATE_INTERNAL_RAM_ADDR -#ifdef RELOCATE_INTERNAL_RAM_ADDR - #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf8000000 -#endif - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Dummies for BAT 4-7 */ -#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CONFIG_SYS_SDRAM2_BASE 0x20000000 -#define CONFIG_SYS_SDRAM3_BASE 0x30000000 -#define CONFIG_SYS_SDRAM4_BASE 0x40000000 -#define CONFIG_SYS_FLASH_BASE 0xfff00000 - -#define CONFIG_SYS_DFL_BOOTCS_BASE 0xff800000 -#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS*/ - -#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */ -#define UART_BASE_BOOTM 0xfbb00000 /* in order to be sync with the kernel parameters. */ -#define PCI0_IO_BASE_BOOTM 0xfd000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ - -/* areas to map different things with the GT in physical space */ -#define CONFIG_SYS_DRAM_BANKS 4 - -/* What to put in the bats. */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -/* Peripheral Device section */ - -/*******************************************************/ -/* We have on the db64360 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ -/*******************************************************/ -#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CONFIG_SYS_DB64360_RESET_ADDR 0x14000000 /* After power on Reset the DB64360 is here */ - -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ -#define CONFIG_SYS_DEV_BASE 0xfc000000 /* GT Devices CS start here */ - -#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE /* DEV_CS0 device modul sram */ -#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) /* DEV_CS1 device modul real time clock (rtc) */ -#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) /* DEV_CS2 device modul doubel uart (duart) */ -#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) /* DEV_CS3 device modul large flash */ - -#define CONFIG_SYS_DEV0_SIZE _8M /* db64360 sram @ 0xfc00.0000 */ -#define CONFIG_SYS_DEV1_SIZE _8M /* db64360 rtc @ 0xfc80.0000 */ -#define CONFIG_SYS_DEV2_SIZE _16M /* db64360 duart @ 0xfd00.0000 */ -#define CONFIG_SYS_DEV3_SIZE _16M /* db64360 flash @ 0xfe00.0000 */ -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ - -/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ -#define CONFIG_SYS_DEV0_PAR 0x8FEFFFFF /* 32Bit sram */ -#define CONFIG_SYS_DEV1_PAR 0x8FCFFFFF /* 8Bit rtc */ -#define CONFIG_SYS_DEV2_PAR 0x8FCFFFFF /* 8Bit duart */ -#define CONFIG_SYS_8BIT_BOOT_PAR 0x8FCFFFFF /* 8Bit flash */ -#define CONFIG_SYS_32BIT_BOOT_PAR 0x8FEFFFFF /* 32Bit flash */ - - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ - /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ - - -/* ronen - update MPP Control MV64360*/ -#define CONFIG_SYS_MPP_CONTROL_0 0x02222222 -#define CONFIG_SYS_MPP_CONTROL_1 0x11333011 -#define CONFIG_SYS_MPP_CONTROL_2 0x40431111 -#define CONFIG_SYS_MPP_CONTROL_3 0x00000044 - -/*# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */ - - -# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 1111 1001 0000 1111 1100 0000 0000 0000*/ - /* gpp[31] gpp[30] gpp[29] gpp[28] */ - /* gpp[27] gpp[24]*/ - /* gpp[19:14] */ - -/* setup new config_value for MV64360 DDR-RAM !! */ -# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ - -#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE -#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */ -#define CONFIG_SYS_INIT_CHAN1 -#define CONFIG_SYS_INIT_CHAN2 - -#define SRAM_BASE CONFIG_SYS_DEV0_SPACE -#define SRAM_SIZE 0x00100000 /* 1 MB of sram */ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ - -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 /* ronen - Support for Intel 82557/82559/82559ER chips */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI (CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */ -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI (CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */ - -#if defined (CONFIG_750CX) -#define CONFIG_SYS_PCI_IDSEL 0x0 -#else -#define CONFIG_SYS_PCI_IDSEL 0x30 -#endif -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 in one BAT */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* I2C addresses for the two DIMM SPD chips */ -#define DIMM0_I2C_ADDR 0x56 -#define DIMM1_I2C_ADDR 0x54 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */ -#define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */ -#define CONFIG_SYS_BOOT_FLASH_WIDTH 1 /* 8 bit */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ -#define CONFIG_SYS_FLASH_CFI 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/mpc74xx.h for the defines used here - */ - -#define CONFIG_SYS_L2 - - -#if defined (CONFIG_750CX) || defined (CONFIG_750FX) -#define L2_INIT 0 -#else - -#define L2_INIT 0 -/* -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -*/ -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -#define CONFIG_SYS_BOARD_ASM_INIT 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h deleted file mode 100644 index abc443499c..0000000000 --- a/include/configs/DB64460.h +++ /dev/null @@ -1,517 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* This define must be before the core.h include */ -#define CONFIG_DB64460 1 /* this is an DB64460 board */ - -#ifndef __ASSEMBLY__ -#include "../board/Marvell/include/core.h" -#endif - -/*-----------------------------------------------------*/ -/* #include "../board/db64460/local.h" */ -#ifndef __LOCAL_H -#define __LOCAL_H - -#define CONFIG_ETHADDR 64:46:00:00:00:01 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 64:46:00:00:00:02 -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 64:46:00:00:00:03 - -#define CONFIG_ENV_OVERWRITE -#endif /* __CONFIG_H */ - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_74xx /* we have a 750FX (override local.h) */ - -#define CONFIG_DB64460 1 /* this is an DB64460 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ -/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the - DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. - so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase, - see sdram_init.c */ -#undef CONFIG_ECC /* enable ECC support */ -#define CONFIG_MV64460_ECC - -/* which initialization functions to call for this board */ -#define CONFIG_MISC_INIT_R /* initialize the icache L1 */ -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_BOARD_NAME "DB64460" -#define CONFIG_IDENT_STRING "Marvell DB64460 (1.0)" - -/*#define CONFIG_SYS_HUSH_PARSER */ -#undef CONFIG_SYS_HUSH_PARSER - - -/* - * The following defines let you select what serial you want to use - * for your console driver. - * - * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 - * to 0 below. - * - * to use the MPSC, #define CONFIG_MPSC. If you have wired up another - * mpsc channel, change CONFIG_MPSC_PORT to the desired value. - */ - -#define CONFIG_MPSC_PORT 0 - -/* to change the default ethernet port, use this define (options: 0, 1, 2) */ -#define MV_ETH_DEVS 3 - -/* #undef CONFIG_ETHER_PORT_MII */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK - - -#undef CONFIG_BOOTARGS -/*#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */ - -/* ronen - autoboot using tftp */ -#if (CONFIG_BOOTDELAY >= 0) -#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 uImage;\ - setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \ - ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000; " - -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#endif - -/* ronen - the u-boot.bin should be ~0x30000 bytes */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \ - "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \ - "bootargs_root=root=/dev/nfs rw\0" \ - "bootargs_end=:::DB64460:eth0:none \0"\ - "ethprime=mv_enet0\0"\ - "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \ -ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" - -/* --------------------------------------------------------------------------------------------------------------- */ -/* New bootcommands for Marvell DB64460 c 2002 Ingo Assmus */ - -#define CONFIG_IPADDR 10.2.40.90 - -#define CONFIG_SERIAL "No. 1" -#define CONFIG_SERVERIP 10.2.1.126 -#define CONFIG_ROOTPATH "/mnt/yellow_dog_mini" - - -#define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n -#define CONFIG_TESETDRAMWALK n - -/* --------------------------------------------------------------------------------------------------------------- */ - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ - -/* Use first bank for JFFS2, second bank contains U-Boot. - * - * Note: fake mtd_id's used, no linux mtd map file. - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=db64460-1" -#define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)" -*/ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */ - -/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/*#define CONFIG_SYS_MEMTEST_START 0x00400000 memtest works on */ -/*#define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -/*#define CONFIG_SYS_MEMTEST_END 0x07c00000 4 ... 124 MB in DRAM */ - -/* -#define CONFIG_SYS_DRAM_TEST - * DRAM tests - * CONFIG_SYS_DRAM_TEST - enables the following tests. - * - * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. - */ -#define CONFIG_SYS_DRAM_TEST -#if defined(CONFIG_SYS_DRAM_TEST) -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -/* #define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CONFIG_SYS_DRAM_TEST_DATA -#define CONFIG_SYS_DRAM_TEST_ADDRESS -#define CONFIG_SYS_DRAM_TEST_WALK -#endif /* CONFIG_SYS_DRAM_TEST */ - -#undef CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ -#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ - -#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ - -/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ -#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ - -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */ -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */ - -/*ronen - this is the Tclk (MV64460 core) */ -#define CONFIG_SYS_TCLK 133000000 - - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_750FX_HID0 0x8000c084 -#define CONFIG_SYS_750FX_HID1 0x54800000 -#define CONFIG_SYS_750FX_HID2 0x00000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* - * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS - * To an unused memory region. The stack will remain in cache until RAM - * is initialized -*/ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define RELOCATE_INTERNAL_RAM_ADDR -#ifdef RELOCATE_INTERNAL_RAM_ADDR - #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf8000000 -#endif - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Dummies for BAT 4-7 */ -#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CONFIG_SYS_SDRAM2_BASE 0x20000000 -#define CONFIG_SYS_SDRAM3_BASE 0x30000000 -#define CONFIG_SYS_SDRAM4_BASE 0x40000000 -#define CONFIG_SYS_FLASH_BASE 0xfff00000 - -#define CONFIG_SYS_DFL_BOOTCS_BASE 0xff800000 -#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS*/ - -#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */ -#define UART_BASE_BOOTM 0xfbb00000 /* in order to be sync with the kernel parameters. */ -#define PCI0_IO_BASE_BOOTM 0xfd000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ - -/* areas to map different things with the GT in physical space */ -#define CONFIG_SYS_DRAM_BANKS 4 - -/* What to put in the bats. */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -/* Peripheral Device section */ - -/*******************************************************/ -/* We have on the db64460 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ -/*******************************************************/ -#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CONFIG_SYS_DB64460_RESET_ADDR 0x14000000 /* After power on Reset the DB64460 is here */ - -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ -#define CONFIG_SYS_DEV_BASE 0xfc000000 /* GT Devices CS start here */ - -#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE /* DEV_CS0 device modul sram */ -#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) /* DEV_CS1 device modul real time clock (rtc) */ -#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) /* DEV_CS2 device modul doubel uart (duart) */ -#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) /* DEV_CS3 device modul large flash */ - -#define CONFIG_SYS_DEV0_SIZE _8M /* db64460 sram @ 0xfc00.0000 */ -#define CONFIG_SYS_DEV1_SIZE _8M /* db64460 rtc @ 0xfc80.0000 */ -#define CONFIG_SYS_DEV2_SIZE _16M /* db64460 duart @ 0xfd00.0000 */ -#define CONFIG_SYS_DEV3_SIZE _16M /* db64460 flash @ 0xfe00.0000 */ -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ - -/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ -#define CONFIG_SYS_DEV0_PAR 0x8FEFFFFF /* 32Bit sram */ -#define CONFIG_SYS_DEV1_PAR 0x8FCFFFFF /* 8Bit rtc */ -#define CONFIG_SYS_DEV2_PAR 0x8FCFFFFF /* 8Bit duart */ -#define CONFIG_SYS_8BIT_BOOT_PAR 0x8FCFFFFF /* 8Bit flash */ -#define CONFIG_SYS_32BIT_BOOT_PAR 0x8FEFFFFF /* 32Bit flash */ - - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ - /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ - - -/* ronen - update MPP Control MV64460*/ -#define CONFIG_SYS_MPP_CONTROL_0 0x02222222 -#define CONFIG_SYS_MPP_CONTROL_1 0x11333011 -#define CONFIG_SYS_MPP_CONTROL_2 0x40431111 -#define CONFIG_SYS_MPP_CONTROL_3 0x00000044 - -/*# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */ - - -# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 1111 1001 0000 1111 1100 0000 0000 0000*/ - /* gpp[31] gpp[30] gpp[29] gpp[28] */ - /* gpp[27] gpp[24]*/ - /* gpp[19:14] */ - -/* setup new config_value for MV64460 DDR-RAM !! */ -# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ - -#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE -#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */ -#define CONFIG_SYS_INIT_CHAN1 -#define CONFIG_SYS_INIT_CHAN2 - -#define SRAM_BASE CONFIG_SYS_DEV0_SPACE -#define SRAM_SIZE 0x00100000 /* 1 MB of sram */ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ - -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 /* ronen - Support for Intel 82557/82559/82559ER chips */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI (CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */ -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI (CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */ - -#if defined (CONFIG_750CX) -#define CONFIG_SYS_PCI_IDSEL 0x0 -#else -#define CONFIG_SYS_PCI_IDSEL 0x30 -#endif -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 in one BAT */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* I2C addresses for the two DIMM SPD chips */ -#define DIMM0_I2C_ADDR 0x56 -#define DIMM1_I2C_ADDR 0x54 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */ -#define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */ -#define CONFIG_SYS_BOOT_FLASH_WIDTH 1 /* 8 bit */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ -#define CONFIG_SYS_FLASH_CFI 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/mpc74xx.h for the defines used here - */ - -#define CONFIG_SYS_L2 - - -#if defined (CONFIG_750CX) || defined (CONFIG_750FX) -#define L2_INIT 0 -#else - -#define L2_INIT 0 -/* -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -*/ -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -#define CONFIG_SYS_BOARD_ASM_INIT 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h deleted file mode 100644 index a210e293a9..0000000000 --- a/include/configs/p3mx.h +++ /dev/null @@ -1,434 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Based on original work by - * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards - * - * The defines: - * CONFIG_P3M750 or - * CONFIG_P3M7448 - * are written into include/config.h by the "make xxx_config" command - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_P3Mx /* used for both board versions */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#if defined (CONFIG_P3M750) -#define CONFIG_750FX /* 750GL/GX/FX */ -#define CONFIG_HIGH_BATS /* High BATs supported */ -#define CONFIG_SYS_BOARD_NAME "P3M750" -#define CONFIG_SYS_BUS_CLK 100000000 -#define CONFIG_SYS_TCLK 100000000 -#elif defined (CONFIG_P3M7448) -#define CONFIG_74xx -#define CONFIG_SYS_BOARD_NAME "P3M7448" -#define CONFIG_SYS_BUS_CLK 133333333 -#define CONFIG_SYS_TCLK 133333333 -#endif -#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ - -/* which initialization functions to call for this board */ -#define CONFIG_SYS_BOARD_ASM_INIT 1 -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#ifdef CONFIG_P3M750 -#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#if defined (CONFIG_P3M750) -#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of flash banks */ -#define CONFIG_SYS_BOOT_SIZE _8M /* boot flash */ -#elif defined (CONFIG_P3M7448) -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of flash banks */ -#define CONFIG_SYS_BOOT_SIZE _16M /* boot flash */ -#endif -#define CONFIG_SYS_BOOT_SPACE CONFIG_SYS_FLASH_BASE /* BOOT_CS0 flash 0 */ -#define CONFIG_SYS_MONITOR_BASE 0xfff00000 -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -#define CONFIG_SYS_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ -#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers are mapped here */ -#define CONFIG_SYS_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ - /* - * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS - * To an unused memory region. The stack will remain in cache until RAM - * is initialized -*/ -#undef CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x42000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_MPSC /* MV64460 Serial */ -#define CONFIG_MPSC_PORT 0 -#define CONFIG_BAUDRATE 115200 /* console baudrate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/*----------------------------------------------------------------------- - * Ethernet - *----------------------------------------------------------------------*/ -/* Change the default ethernet port, use this define (options: 0, 1, 2) */ -#define CONFIG_SYS_ETH_PORT ETH_0 -#define MV_ETH_DEVS 2 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#if defined (CONFIG_P3M750) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (1 device) */ -#elif defined (CONFIG_P3M7448) -#define CONFIG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */ -#endif -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_MV64460_ECC - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */ - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------*/ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#undef CONFIG_PCI /* include pci support */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ -#endif /* CONFIG_PCI */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 - -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI_IDSEL 0x30 - -#undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "u-boot=p3mx/u-boot/u-boot.bin\0" \ - "load=tftp 100000 ${u-boot}\0" \ - "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \ - "cp.b 100000 fff00000 40000;" \ - "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ - "serverip=11.0.0.152\0" - -#if defined (CONFIG_P3M750) -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "hostname=p3m750\0" \ - "bootfile=/tftpboot/p3mx/vxWorks.st\0" \ - "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc180000\0" \ - "vxfile=p3m750/vxWorks\0" \ - "vxuser=ddg\0" \ - "vxpass=ddg\0" \ - "vxtarget=target\0" \ - "vxflags=0x8\0" \ - "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \ - "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \ - "f=${vxflags}\0" -#elif defined (CONFIG_P3M7448) -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "hostname=p3m7448\0" -#endif - -#if defined (CONFIG_P3M750) -#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx" -#elif defined (CONFIG_P3M7448) -#define CONFIG_BOOTCOMMAND " " -#endif - -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_PCI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_SDRAM - - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/*----------------------------------------------------------------------- - * Marvell MV64460 config settings - *----------------------------------------------------------------------*/ -/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */ -#if defined (CONFIG_P3M750) -#define CONFIG_SYS_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ -#elif defined (CONFIG_P3M7448) -#define CONFIG_SYS_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ -#endif - -/* - * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered) - * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered) - * MPP[2] NC - * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered) - * MPP[4] PCI Monarch# GPIO IN Connected to P12 - * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered) - * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14 - * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14 - * MPP[8] Reserved Do not use - * MPP[9] Reserved Do not use - * MPP[10] Reserved Do not use - * MPP[11] Reserved Do not use - * MPP[12] Phy 0 Interrupt Int IN - * MPP[13] Phy 1 Interrupt Int IN - * MPP[14] NC - * MPP[15] NC - * MPP[16] PCI Interrupt C Int IN Connected to P11 - * MPP[17] PCI Interrupt D Int IN Connected to P11 - * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24] - * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic - * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog - * MPP[21] NC - * MPP[22] GP LED Green GPIO OUT - * MPP[23] GP LED Red GPIO OUT - * MPP[24] Watchdog NMI# Int OUT - * MPP[25] NC - * MPP[26] NC - * MPP[27] PCI Interrupt A Int IN Connected to P11 - * MPP[28] NC - * MPP[29] PCI Interrupt B Int IN Connected to P11 - * MPP[30] Module reset GPIO OUT Board reset - * MPP[31] PCI EReady GPIO IN Connected to P12 - */ -#define CONFIG_SYS_MPP_CONTROL_0 0x00303022 -#define CONFIG_SYS_MPP_CONTROL_1 0x00000000 -#define CONFIG_SYS_MPP_CONTROL_2 0x00004000 -#define CONFIG_SYS_MPP_CONTROL_3 0x00000004 -#define CONFIG_SYS_GPP_LEVEL_CONTROL 0x280730D0 - -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 in one BAT */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* set rest out of range for Linux !!!!!!!!!!! */ - -/* IBAT5 and DBAT5 */ -#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -/* IBAT6 and DBAT6 */ -#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* IBAT7 and DBAT7 */ -#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/mpc74xx.h for the defines used here - */ -#define CONFIG_SYS_L2 - -#if defined (CONFIG_750CX) || defined (CONFIG_750FX) -#define L2_INIT 0 -#else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -#ifndef __ASSEMBLY__ -#include <../board/Marvell/include/core.h> -#endif - -#endif /* __CONFIG_H */ |