diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/common.h | 3 | ||||
| -rw-r--r-- | include/configs/ls1088aqds.h | 31 | ||||
| -rw-r--r-- | include/configs/ls1088ardb.h | 29 |
3 files changed, 63 insertions, 0 deletions
diff --git a/include/common.h b/include/common.h index 436200044f..0fe9439a93 100644 --- a/include/common.h +++ b/include/common.h @@ -364,6 +364,9 @@ int embedded_dtb_select(void); int misc_init_f (void); int misc_init_r (void); +#if defined(CONFIG_VID) +int init_func_vid(void); +#endif /* common/exports.c */ void jumptable_init(void); diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 8fbf89001e..5674a5d207 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -170,9 +170,13 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_DFLTBANK 0x0e #define QIXIS_LBMAP_ALTBANK 0x2e #define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 +#define QIXIS_LBMAP_IFC 0x00 #define QIXIS_LBMAP_SD_QSPI 0x0e #define QIXIS_LBMAP_QSPI 0x0e +#define QIXIS_RCW_SRC_IFC 0x25 #define QIXIS_RCW_SRC_SD 0x40 +#define QIXIS_RCW_SRC_EMMC 0x41 #define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_CTL_RESET 0x41 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 @@ -279,6 +283,33 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH5 0xD +#define I2C_MUX_CH_VOL_MONITOR 0xA + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 +#define I2C_SVDD_MONITOR_ADDR 0x4F + +#define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" +#define CONFIG_VID + +/* The lowest and highest voltage allowed for LS1088AQDS */ +#define VDD_MV_MIN 819 +#define VDD_MV_MAX 1212 + +#define CONFIG_VOL_MONITOR_LTC3882_SET +#define CONFIG_VOL_MONITOR_LTC3882_READ + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * RTC configuration */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index d0066e3551..a6271f5ae2 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -151,6 +151,7 @@ #endif #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_BRDCFG4_OFFSET 0x54 #define QIXIS_LBMAP_SWITCH 2 #define QIXIS_QMAP_MASK 0xe0 #define QIXIS_QMAP_SHIFT 5 @@ -159,9 +160,11 @@ #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x20 #define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 #define QIXIS_LBMAP_SD_QSPI 0x00 #define QIXIS_LBMAP_QSPI 0x00 #define QIXIS_RCW_SRC_SD 0x40 +#define QIXIS_RCW_SRC_EMMC 0x41 #define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 @@ -225,6 +228,32 @@ #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define I2C_MUX_CH_VOL_MONITOR 0xA +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 +#define I2C_SVDD_MONITOR_ADDR 0x4F + +#define CONFIG_VID_FLS_ENV "ls1088ardb_vdd_mv" +#define CONFIG_VID + +/* The lowest and highest voltage allowed for LS1088ARDB */ +#define VDD_MV_MIN 819 +#define VDD_MV_MAX 1212 + +#define CONFIG_VOL_MONITOR_LTC3882_SET +#define CONFIG_VOL_MONITOR_LTC3882_READ + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * I2C bus multiplexer */ |