diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/colibri_vf.h | 12 | ||||
| -rw-r--r-- | include/configs/mx6_common.h | 10 | ||||
| -rw-r--r-- | include/configs/tqma6.h | 18 | ||||
| -rw-r--r-- | include/configs/tqma6_mba6.h | 4 | ||||
| -rw-r--r-- | include/configs/wandboard.h | 8 | ||||
| -rw-r--r-- | include/configs/warp.h | 9 |
6 files changed, 43 insertions, 18 deletions
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 4dec42a953..f26aad4d8b 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -54,6 +54,11 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR +/* GPIO support */ +#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO +#define CONFIG_VYBRID_GPIO + /* Dynamic MTD partition support */ #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ #define CONFIG_MTD_PARTITIONS @@ -266,4 +271,11 @@ #define CONFIG_USB_GADGET_MASS_STORAGE #define CONFIG_CMD_USB_MASS_STORAGE +/* Enable SPI support */ +#ifdef CONFIG_OF_CONTROL +#define CONFIG_DM_SPI +#define CONFIG_CMD_SPI +#define CONFIG_FSL_DSPI +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 233c6d2e88..50370e1366 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -53,11 +53,19 @@ #define CONFIG_REVISION_TAG /* Boot options */ +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL)) +#define CONFIG_LOADADDR 0x82000000 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x87800000 +#endif +#else #define CONFIG_LOADADDR 0x12000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x17800000 #endif +#endif +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + #ifndef CONFIG_BOOTDELAY #define CONFIG_BOOTDELAY 3 #endif diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 4859e03890..00294f6d52 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -22,6 +22,13 @@ /* #endif */ +/* place code in last 4 MiB of RAM */ +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#define CONFIG_SYS_TEXT_BASE 0x2fc00000 +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) +#define CONFIG_SYS_TEXT_BASE 0x4fc00000 +#endif + #include "mx6_common.h" #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) @@ -116,13 +123,6 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_ITEST -/* place code in last 4 MiB of RAM */ -#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -#define CONFIG_SYS_TEXT_BASE 0x2fc00000 -#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) -#define CONFIG_SYS_TEXT_BASE 0x4fc00000 -#endif - #define CONFIG_ENV_SIZE (SZ_8K) /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M) @@ -367,10 +367,6 @@ "panicboot=echo No boot device !!! reset\0" \ TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_STACKSIZE (128u * SZ_1K) /* Physical Memory Map */ diff --git a/include/configs/tqma6_mba6.h b/include/configs/tqma6_mba6.h index 88c00679b6..2f52598f2e 100644 --- a/include/configs/tqma6_mba6.h +++ b/include/configs/tqma6_mba6.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013, 2014 Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2013 - 2015 Markus Niebel <Markus.Niebel@tq-group.com> * * Configuration settings for the TQ Systems TQMa6<Q,S> module. * @@ -11,7 +11,7 @@ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-mba6x.dtb" -#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q) +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) #define CONFIG_DEFAULT_FDT_FILE "imx6q-mba6x.dtb" #endif diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 0144e16131..f05b55a0e2 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -192,10 +192,14 @@ "bootz; " \ "fi;\0" \ "findfdt="\ - "if test $board_rev = MX6Q ; then " \ + "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ "setenv fdtfile imx6q-wandboard.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ + "if test $board_name = C1 && test $board_rev = MX6DL ; then " \ "setenv fdtfile imx6dl-wandboard.dtb; fi; " \ + "if test $board_name = B1 && test $board_rev = MX6Q ; then " \ + "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \ + "if test $board_name = B1 && test $board_rev = MX6DL ; then " \ + "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ diff --git a/include/configs/warp.h b/include/configs/warp.h index e38b425215..39b49198bf 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -25,9 +25,10 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR /* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE +#define CONFIG_SUPPORT_EMMC_BOOT /* Command definition */ #undef CONFIG_CMD_NFS @@ -93,9 +94,13 @@ #define CONFIG_CMD_DFU #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 +/* Fuses */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ |