diff options
Diffstat (limited to 'include')
79 files changed, 2425 insertions, 1605 deletions
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h index 33e396a066..ba73bae9e5 100644 --- a/include/74xx_7xx.h +++ b/include/74xx_7xx.h @@ -111,7 +111,7 @@ typedef enum __cpu_t { CPU_750CX, CPU_750FX, CPU_750GX, CPU_7400, CPU_7410, - CPU_7448, + CPU_7447A, CPU_7448, CPU_7450, CPU_7455, CPU_7457, CPU_UNKNOWN} cpu_t; diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h new file mode 100644 index 0000000000..7e20d97b7f --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/clk.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_CLK_H__ +#define __ASM_AVR32_ARCH_CLK_H__ + +#ifdef CONFIG_PLL +#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) +#else +#define MAIN_CLK_RATE (CFG_OSC0_HZ) +#endif + +static inline unsigned long get_cpu_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_CPU; +} +static inline unsigned long get_hsb_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_HSB; +} +static inline unsigned long get_pba_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_PBA; +} +static inline unsigned long get_pbb_clk_rate(void) +{ + return MAIN_CLK_RATE >> CFG_CLKDIV_PBB; +} + +/* Accessors for specific devices. More will be added as needed. */ +static inline unsigned long get_sdram_clk_rate(void) +{ + return get_hsb_clk_rate(); +} +static inline unsigned long get_usart_clk_rate(unsigned int dev_id) +{ + return get_pba_clk_rate(); +} +static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) +{ + return get_pbb_clk_rate(); +} +static inline unsigned long get_macb_hclk_rate(unsigned int dev_id) +{ + return get_hsb_clk_rate(); +} +static inline unsigned long get_mci_clk_rate(void) +{ + return get_pbb_clk_rate(); +} + +#endif /* __ASM_AVR32_ARCH_CLK_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h new file mode 100644 index 0000000000..e4812d4d08 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/gpio.h @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_GPIO_H__ +#define __ASM_AVR32_ARCH_GPIO_H__ + +#include <asm/arch/memory-map.h> + +#define NR_GPIO_CONTROLLERS 5 + +/* + * Pin numbers identifying specific GPIO pins on the chip. + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIN_PA0 (GPIO_PIOA_BASE + 0) +#define GPIO_PIN_PA1 (GPIO_PIOA_BASE + 1) +#define GPIO_PIN_PA2 (GPIO_PIOA_BASE + 2) +#define GPIO_PIN_PA3 (GPIO_PIOA_BASE + 3) +#define GPIO_PIN_PA4 (GPIO_PIOA_BASE + 4) +#define GPIO_PIN_PA5 (GPIO_PIOA_BASE + 5) +#define GPIO_PIN_PA6 (GPIO_PIOA_BASE + 6) +#define GPIO_PIN_PA7 (GPIO_PIOA_BASE + 7) +#define GPIO_PIN_PA8 (GPIO_PIOA_BASE + 8) +#define GPIO_PIN_PA9 (GPIO_PIOA_BASE + 9) +#define GPIO_PIN_PA10 (GPIO_PIOA_BASE + 10) +#define GPIO_PIN_PA11 (GPIO_PIOA_BASE + 11) +#define GPIO_PIN_PA12 (GPIO_PIOA_BASE + 12) +#define GPIO_PIN_PA13 (GPIO_PIOA_BASE + 13) +#define GPIO_PIN_PA14 (GPIO_PIOA_BASE + 14) +#define GPIO_PIN_PA15 (GPIO_PIOA_BASE + 15) +#define GPIO_PIN_PA16 (GPIO_PIOA_BASE + 16) +#define GPIO_PIN_PA17 (GPIO_PIOA_BASE + 17) +#define GPIO_PIN_PA18 (GPIO_PIOA_BASE + 18) +#define GPIO_PIN_PA19 (GPIO_PIOA_BASE + 19) +#define GPIO_PIN_PA20 (GPIO_PIOA_BASE + 20) +#define GPIO_PIN_PA21 (GPIO_PIOA_BASE + 21) +#define GPIO_PIN_PA22 (GPIO_PIOA_BASE + 22) +#define GPIO_PIN_PA23 (GPIO_PIOA_BASE + 23) +#define GPIO_PIN_PA24 (GPIO_PIOA_BASE + 24) +#define GPIO_PIN_PA25 (GPIO_PIOA_BASE + 25) +#define GPIO_PIN_PA26 (GPIO_PIOA_BASE + 26) +#define GPIO_PIN_PA27 (GPIO_PIOA_BASE + 27) +#define GPIO_PIN_PA28 (GPIO_PIOA_BASE + 28) +#define GPIO_PIN_PA29 (GPIO_PIOA_BASE + 29) +#define GPIO_PIN_PA30 (GPIO_PIOA_BASE + 30) +#define GPIO_PIN_PA31 (GPIO_PIOA_BASE + 31) + +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIN_PB0 (GPIO_PIOB_BASE + 0) +#define GPIO_PIN_PB1 (GPIO_PIOB_BASE + 1) +#define GPIO_PIN_PB2 (GPIO_PIOB_BASE + 2) +#define GPIO_PIN_PB3 (GPIO_PIOB_BASE + 3) +#define GPIO_PIN_PB4 (GPIO_PIOB_BASE + 4) +#define GPIO_PIN_PB5 (GPIO_PIOB_BASE + 5) +#define GPIO_PIN_PB6 (GPIO_PIOB_BASE + 6) +#define GPIO_PIN_PB7 (GPIO_PIOB_BASE + 7) +#define GPIO_PIN_PB8 (GPIO_PIOB_BASE + 8) +#define GPIO_PIN_PB9 (GPIO_PIOB_BASE + 9) +#define GPIO_PIN_PB10 (GPIO_PIOB_BASE + 10) +#define GPIO_PIN_PB11 (GPIO_PIOB_BASE + 11) +#define GPIO_PIN_PB12 (GPIO_PIOB_BASE + 12) +#define GPIO_PIN_PB13 (GPIO_PIOB_BASE + 13) +#define GPIO_PIN_PB14 (GPIO_PIOB_BASE + 14) +#define GPIO_PIN_PB15 (GPIO_PIOB_BASE + 15) +#define GPIO_PIN_PB16 (GPIO_PIOB_BASE + 16) +#define GPIO_PIN_PB17 (GPIO_PIOB_BASE + 17) +#define GPIO_PIN_PB18 (GPIO_PIOB_BASE + 18) +#define GPIO_PIN_PB19 (GPIO_PIOB_BASE + 19) +#define GPIO_PIN_PB20 (GPIO_PIOB_BASE + 20) +#define GPIO_PIN_PB21 (GPIO_PIOB_BASE + 21) +#define GPIO_PIN_PB22 (GPIO_PIOB_BASE + 22) +#define GPIO_PIN_PB23 (GPIO_PIOB_BASE + 23) +#define GPIO_PIN_PB24 (GPIO_PIOB_BASE + 24) +#define GPIO_PIN_PB25 (GPIO_PIOB_BASE + 25) +#define GPIO_PIN_PB26 (GPIO_PIOB_BASE + 26) +#define GPIO_PIN_PB27 (GPIO_PIOB_BASE + 27) +#define GPIO_PIN_PB28 (GPIO_PIOB_BASE + 28) +#define GPIO_PIN_PB29 (GPIO_PIOB_BASE + 29) +#define GPIO_PIN_PB30 (GPIO_PIOB_BASE + 30) + +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIN_PC0 (GPIO_PIOC_BASE + 0) +#define GPIO_PIN_PC1 (GPIO_PIOC_BASE + 1) +#define GPIO_PIN_PC2 (GPIO_PIOC_BASE + 2) +#define GPIO_PIN_PC3 (GPIO_PIOC_BASE + 3) +#define GPIO_PIN_PC4 (GPIO_PIOC_BASE + 4) +#define GPIO_PIN_PC5 (GPIO_PIOC_BASE + 5) +#define GPIO_PIN_PC6 (GPIO_PIOC_BASE + 6) +#define GPIO_PIN_PC7 (GPIO_PIOC_BASE + 7) +#define GPIO_PIN_PC8 (GPIO_PIOC_BASE + 8) +#define GPIO_PIN_PC9 (GPIO_PIOC_BASE + 9) +#define GPIO_PIN_PC10 (GPIO_PIOC_BASE + 10) +#define GPIO_PIN_PC11 (GPIO_PIOC_BASE + 11) +#define GPIO_PIN_PC12 (GPIO_PIOC_BASE + 12) +#define GPIO_PIN_PC13 (GPIO_PIOC_BASE + 13) +#define GPIO_PIN_PC14 (GPIO_PIOC_BASE + 14) +#define GPIO_PIN_PC15 (GPIO_PIOC_BASE + 15) +#define GPIO_PIN_PC16 (GPIO_PIOC_BASE + 16) +#define GPIO_PIN_PC17 (GPIO_PIOC_BASE + 17) +#define GPIO_PIN_PC18 (GPIO_PIOC_BASE + 18) +#define GPIO_PIN_PC19 (GPIO_PIOC_BASE + 19) +#define GPIO_PIN_PC20 (GPIO_PIOC_BASE + 20) +#define GPIO_PIN_PC21 (GPIO_PIOC_BASE + 21) +#define GPIO_PIN_PC22 (GPIO_PIOC_BASE + 22) +#define GPIO_PIN_PC23 (GPIO_PIOC_BASE + 23) +#define GPIO_PIN_PC24 (GPIO_PIOC_BASE + 24) +#define GPIO_PIN_PC25 (GPIO_PIOC_BASE + 25) +#define GPIO_PIN_PC26 (GPIO_PIOC_BASE + 26) +#define GPIO_PIN_PC27 (GPIO_PIOC_BASE + 27) +#define GPIO_PIN_PC28 (GPIO_PIOC_BASE + 28) +#define GPIO_PIN_PC29 (GPIO_PIOC_BASE + 29) +#define GPIO_PIN_PC30 (GPIO_PIOC_BASE + 30) +#define GPIO_PIN_PC31 (GPIO_PIOC_BASE + 31) + +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIN_PD0 (GPIO_PIOD_BASE + 0) +#define GPIO_PIN_PD1 (GPIO_PIOD_BASE + 1) +#define GPIO_PIN_PD2 (GPIO_PIOD_BASE + 2) +#define GPIO_PIN_PD3 (GPIO_PIOD_BASE + 3) +#define GPIO_PIN_PD4 (GPIO_PIOD_BASE + 4) +#define GPIO_PIN_PD5 (GPIO_PIOD_BASE + 5) +#define GPIO_PIN_PD6 (GPIO_PIOD_BASE + 6) +#define GPIO_PIN_PD7 (GPIO_PIOD_BASE + 7) +#define GPIO_PIN_PD8 (GPIO_PIOD_BASE + 8) +#define GPIO_PIN_PD9 (GPIO_PIOD_BASE + 9) +#define GPIO_PIN_PD10 (GPIO_PIOD_BASE + 10) +#define GPIO_PIN_PD11 (GPIO_PIOD_BASE + 11) +#define GPIO_PIN_PD12 (GPIO_PIOD_BASE + 12) +#define GPIO_PIN_PD13 (GPIO_PIOD_BASE + 13) +#define GPIO_PIN_PD14 (GPIO_PIOD_BASE + 14) +#define GPIO_PIN_PD15 (GPIO_PIOD_BASE + 15) +#define GPIO_PIN_PD16 (GPIO_PIOD_BASE + 16) +#define GPIO_PIN_PD17 (GPIO_PIOD_BASE + 17) + +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) +#define GPIO_PIN_PE0 (GPIO_PIOE_BASE + 0) +#define GPIO_PIN_PE1 (GPIO_PIOE_BASE + 1) +#define GPIO_PIN_PE2 (GPIO_PIOE_BASE + 2) +#define GPIO_PIN_PE3 (GPIO_PIOE_BASE + 3) +#define GPIO_PIN_PE4 (GPIO_PIOE_BASE + 4) +#define GPIO_PIN_PE5 (GPIO_PIOE_BASE + 5) +#define GPIO_PIN_PE6 (GPIO_PIOE_BASE + 6) +#define GPIO_PIN_PE7 (GPIO_PIOE_BASE + 7) +#define GPIO_PIN_PE8 (GPIO_PIOE_BASE + 8) +#define GPIO_PIN_PE9 (GPIO_PIOE_BASE + 9) +#define GPIO_PIN_PE10 (GPIO_PIOE_BASE + 10) +#define GPIO_PIN_PE11 (GPIO_PIOE_BASE + 11) +#define GPIO_PIN_PE12 (GPIO_PIOE_BASE + 12) +#define GPIO_PIN_PE13 (GPIO_PIOE_BASE + 13) +#define GPIO_PIN_PE14 (GPIO_PIOE_BASE + 14) +#define GPIO_PIN_PE15 (GPIO_PIOE_BASE + 15) +#define GPIO_PIN_PE16 (GPIO_PIOE_BASE + 16) +#define GPIO_PIN_PE17 (GPIO_PIOE_BASE + 17) +#define GPIO_PIN_PE18 (GPIO_PIOE_BASE + 18) +#define GPIO_PIN_PE19 (GPIO_PIOE_BASE + 19) +#define GPIO_PIN_PE20 (GPIO_PIOE_BASE + 20) +#define GPIO_PIN_PE21 (GPIO_PIOE_BASE + 21) +#define GPIO_PIN_PE22 (GPIO_PIOE_BASE + 22) +#define GPIO_PIN_PE23 (GPIO_PIOE_BASE + 23) +#define GPIO_PIN_PE24 (GPIO_PIOE_BASE + 24) +#define GPIO_PIN_PE25 (GPIO_PIOE_BASE + 25) +#define GPIO_PIN_PE26 (GPIO_PIOE_BASE + 26) + +static inline void *gpio_pin_to_addr(unsigned int pin) +{ + switch (pin >> 5) { + case 0: + return (void *)PIOA_BASE; + case 1: + return (void *)PIOB_BASE; + case 2: + return (void *)PIOC_BASE; + case 3: + return (void *)PIOD_BASE; + case 4: + return (void *)PIOE_BASE; + default: + return NULL; + } +} + +void gpio_select_periph_A(unsigned int pin, int use_pullup); +void gpio_select_periph_B(unsigned int pin, int use_pullup); + +void gpio_enable_ebi(void); +void gpio_enable_usart0(void); +void gpio_enable_usart1(void); +void gpio_enable_usart2(void); +void gpio_enable_usart3(void); +void gpio_enable_macb0(void); +void gpio_enable_macb1(void); +void gpio_enable_mmci(void); + +#endif /* __ASM_AVR32_ARCH_GPIO_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h index e6df4b7fe3..b0e787a92f 100644 --- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h +++ b/include/asm-avr32/arch-at32ap7000/hmatrix2.h @@ -224,9 +224,9 @@ | HMATRIX2_BF(name,value)) /* Register access macros */ -#define hmatrix2_readl(port,reg) \ - readl((port)->regs + HMATRIX2_##reg) -#define hmatrix2_writel(port,reg,value) \ - writel((value), (port)->regs + HMATRIX2_##reg) +#define hmatrix2_readl(reg) \ + readl((void *)HMATRIX_BASE + HMATRIX2_##reg) +#define hmatrix2_writel(reg,value) \ + writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg) #endif /* __ASM_AVR32_HMATRIX2_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h index 8ffe851c89..5513e88e7b 100644 --- a/include/asm-avr32/arch-at32ap7000/memory-map.h +++ b/include/asm-avr32/arch-at32ap7000/memory-map.h @@ -19,43 +19,48 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -#ifndef __ASM_AVR32_PART_MEMORY_MAP_H__ -#define __ASM_AVR32_PART_MEMORY_MAP_H__ +#ifndef __AT32AP7000_MEMORY_MAP_H__ +#define __AT32AP7000_MEMORY_MAP_H__ -#define AUDIOC_BASE 0xFFF02800 -#define DAC_BASE 0xFFF02000 -#define DMAC_BASE 0xFF200000 -#define ECC_BASE 0xFFF03C00 -#define HISI_BASE 0xFFF02C00 -#define HMATRIX_BASE 0xFFF00800 -#define HSDRAMC_BASE 0xFFF03800 -#define HSMC_BASE 0xFFF03400 -#define LCDC_BASE 0xFF000000 -#define MACB0_BASE 0xFFF01800 -#define MACB1_BASE 0xFFF01C00 -#define MMCI_BASE 0xFFF02400 -#define PIOA_BASE 0xFFE02800 -#define PIOB_BASE 0xFFE02C00 -#define PIOC_BASE 0xFFE03000 -#define PIOD_BASE 0xFFE03400 -#define PIOE_BASE 0xFFE03800 -#define PSIF_BASE 0xFFE03C00 -#define PWM_BASE 0xFFF01400 -#define SM_BASE 0xFFF00000 -#define INTC_BASE 0XFFF00400 -#define SPI0_BASE 0xFFE00000 -#define SPI1_BASE 0xFFE00400 -#define SSC0_BASE 0xFFE01C00 -#define SSC1_BASE 0xFFE02000 -#define SSC2_BASE 0xFFE02400 -#define TIMER0_BASE 0xFFF00C00 -#define TIMER1_BASE 0xFFF01000 -#define TWI_BASE 0xFFE00800 -#define USART0_BASE 0xFFE00C00 -#define USART1_BASE 0xFFE01000 -#define USART2_BASE 0xFFE01400 -#define USART3_BASE 0xFFE01800 -#define USB_FIFO 0xFF300000 -#define USB_BASE 0xFFF03000 +/* Devices on the High Speed Bus (HSB) */ +#define LCDC_BASE 0xFF000000 +#define DMAC_BASE 0xFF200000 +#define USB_FIFO 0xFF300000 -#endif /* __ASM_AVR32_PART_MEMORY_MAP_H__ */ +/* Devices on Peripheral Bus A (PBA) */ +#define SPI0_BASE 0xFFE00000 +#define SPI1_BASE 0xFFE00400 +#define TWI_BASE 0xFFE00800 +#define USART0_BASE 0xFFE00C00 +#define USART1_BASE 0xFFE01000 +#define USART2_BASE 0xFFE01400 +#define USART3_BASE 0xFFE01800 +#define SSC0_BASE 0xFFE01C00 +#define SSC1_BASE 0xFFE02000 +#define SSC2_BASE 0xFFE02400 +#define PIOA_BASE 0xFFE02800 +#define PIOB_BASE 0xFFE02C00 +#define PIOC_BASE 0xFFE03000 +#define PIOD_BASE 0xFFE03400 +#define PIOE_BASE 0xFFE03800 +#define PSIF_BASE 0xFFE03C00 + +/* Devices on Peripheral Bus B (PBB) */ +#define SM_BASE 0xFFF00000 +#define INTC_BASE 0xFFF00400 +#define HMATRIX_BASE 0xFFF00800 +#define TIMER0_BASE 0xFFF00C00 +#define TIMER1_BASE 0xFFF01000 +#define PWM_BASE 0xFFF01400 +#define MACB0_BASE 0xFFF01800 +#define MACB1_BASE 0xFFF01C00 +#define DAC_BASE 0xFFF02000 +#define MMCI_BASE 0xFFF02400 +#define AUDIOC_BASE 0xFFF02800 +#define HISI_BASE 0xFFF02C00 +#define USB_BASE 0xFFF03000 +#define HSMC_BASE 0xFFF03400 +#define HSDRAMC_BASE 0xFFF03800 +#define ECC_BASE 0xFFF03C00 + +#endif /* __AT32AP7000_MEMORY_MAP_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h new file mode 100644 index 0000000000..fcfbbb3c6c --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/mmc.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_MMC_H +#define __ASM_AVR32_MMC_H + +struct mmc_cid { + unsigned long psn; + unsigned short oid; + unsigned char mid; + unsigned char prv; + unsigned char mdt; + char pnm[7]; +}; + +struct mmc_csd +{ + u8 csd_structure:2, + spec_vers:4, + rsvd1:2; + u8 taac; + u8 nsac; + u8 tran_speed; + u16 ccc:12, + read_bl_len:4; + u64 read_bl_partial:1, + write_blk_misalign:1, + read_blk_misalign:1, + dsr_imp:1, + rsvd2:2, + c_size:12, + vdd_r_curr_min:3, + vdd_r_curr_max:3, + vdd_w_curr_min:3, + vdd_w_curr_max:3, + c_size_mult:3, + sector_size:5, + erase_grp_size:5, + wp_grp_size:5, + wp_grp_enable:1, + default_ecc:2, + r2w_factor:3, + write_bl_len:4, + write_bl_partial:1, + rsvd3:5; + u8 file_format_grp:1, + copy:1, + perm_write_protect:1, + tmp_write_protect:1, + file_format:2, + ecc:2; + u8 crc:7; + u8 one:1; +}; + +/* MMC Command numbers */ +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_BLOCK 24 +#define MMC_CMD_APP_CMD 55 + +#define MMC_ACMD_SD_SEND_OP_COND 41 + +#define R1_ILLEGAL_COMMAND (1 << 22) +#define R1_APP_CMD (1 << 5) + +#endif /* __ASM_AVR32_MMC_H */ diff --git a/include/asm-avr32/arch-at32ap7000/platform.h b/include/asm-avr32/arch-at32ap7000/platform.h deleted file mode 100644 index 759050116a..0000000000 --- a/include/asm-avr32/arch-at32ap7000/platform.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) 2005-2006 Atmel Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _ASM_AVR32_ARCH_PM_H -#define _ASM_AVR32_ARCH_PM_H - -#include <config.h> - -enum clock_domain_id { - CLOCK_CPU, - CLOCK_HSB, - CLOCK_PBA, - CLOCK_PBB, - NR_CLOCK_DOMAINS, -}; - -enum resource_type { - RESOURCE_GPIO, - RESOURCE_CLOCK, -}; - -enum gpio_func { - GPIO_FUNC_GPIO, - GPIO_FUNC_A, - GPIO_FUNC_B, -}; - -enum device_id { - DEVICE_HEBI, - DEVICE_PBA_BRIDGE, - DEVICE_PBB_BRIDGE, - DEVICE_HRAMC, - /* GPIO controllers must be kept together */ - DEVICE_PIOA, - DEVICE_PIOB, - DEVICE_PIOC, - DEVICE_PIOD, - DEVICE_PIOE, - DEVICE_SM, - DEVICE_INTC, - DEVICE_HMATRIX, -#if defined(CFG_HPDC) - DEVICE_HPDC, -#endif -#if defined(CFG_MACB0) - DEVICE_MACB0, -#endif -#if defined(CFG_MACB1) - DEVICE_MACB1, -#endif -#if defined(CFG_LCDC) - DEVICE_LCDC, -#endif -#if defined(CFG_USART0) - DEVICE_USART0, -#endif -#if defined(CFG_USART1) - DEVICE_USART1, -#endif -#if defined(CFG_USART2) - DEVICE_USART2, -#endif -#if defined(CFG_USART3) - DEVICE_USART3, -#endif -#if defined(CFG_MMCI) - DEVICE_MMCI, -#endif -#if defined(CFG_DMAC) - DEVICE_DMAC, -#endif - NR_DEVICES, - NO_DEVICE = -1, -}; - -struct resource { - enum resource_type type; - union { - struct { - unsigned long base; - } iomem; - struct { - unsigned char nr_pins; - enum device_id gpio_dev; - enum gpio_func func; - unsigned short start; - } gpio; - struct { - enum clock_domain_id id; - unsigned char index; - } clock; - } u; -}; - -struct device { - void *regs; - unsigned int nr_resources; - const struct resource *resource; -}; - -struct clock_domain { - unsigned short reg; - enum clock_domain_id id; - enum device_id bridge; -}; - -extern const struct device chip_device[NR_DEVICES]; -extern const struct clock_domain chip_clock[NR_CLOCK_DOMAINS]; - -/** - * Set up PIO, clock management and I/O memory for a device. - */ -const struct device *get_device(enum device_id devid); -void put_device(const struct device *dev); - -int gpio_set_func(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins, enum gpio_func func); -void gpio_free(enum device_id gpio_devid, unsigned int start, - unsigned int nr_pins); - -void pm_init(void); -int pm_enable_clock(enum clock_domain_id id, unsigned int index); -void pm_disable_clock(enum clock_domain_id id, unsigned int index); -unsigned long pm_get_clock_freq(enum clock_domain_id domain); - -void cpu_enable_sdram(void); - -#endif /* _ASM_AVR32_ARCH_PM_H */ diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h index 01d836c639..681c514ccf 100644 --- a/include/asm-avr32/global_data.h +++ b/include/asm-avr32/global_data.h @@ -35,10 +35,8 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - const struct device *console_uart; - const struct device *sm; unsigned long baudrate; - unsigned long sdram_size; + unsigned long stack_end; /* highest stack address */ unsigned long have_console; /* serial_init() was called */ unsigned long reloc_off; /* Relocation Offset */ unsigned long env_addr; /* Address of env struct */ diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h index 7ba25cde53..583e5dc101 100644 --- a/include/asm-avr32/initcalls.h +++ b/include/asm-avr32/initcalls.h @@ -26,8 +26,6 @@ extern int cpu_init(void); extern int timer_init(void); -extern void board_init_memories(void); -extern void board_init_pio(void); extern void board_init_info(void); #endif /* __ASM_AVR32_INITCALLS_H__ */ diff --git a/include/asm-blackfin/arch-bf533/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h index ce58863b10..65749ee458 100644 --- a/include/asm-blackfin/arch-bf533/bf533_serial.h +++ b/include/asm-blackfin/arch-bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf533_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h index bc09922a5e..f4440a8d47 100644 --- a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h deleted file mode 100644 index 89f0325381..0000000000 --- a/include/asm-blackfin/arch-bf533/cplbtab.h +++ /dev/null @@ -1,482 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/************************************************************************* - * ICPLB TABLE - *************************************************************************/ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -#ifndef CONFIG_EZKIT /*STAMP Memory regions */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -#endif -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */ -#endif -.byte4 0xffffffff; /* end of section - termination */ - -/********************************************************************** - * PAGE DESCRIPTOR TABLE - * - **********************************************************************/ - -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ - -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -#endif - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */ -#endif - -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533)) -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf533/irq.h b/include/asm-blackfin/arch-bf533/irq.h index 9c5230db41..323574590b 100644 --- a/include/asm-blackfin/arch-bf533/irq.h +++ b/include/asm-blackfin/arch-bf533/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf533_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h index 1610411ee9..64088f243c 100644 --- a/include/asm-blackfin/arch-bf537/bf537_serial.h +++ b/include/asm-blackfin/arch-bf537/bf537_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf537_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h index 0043e42bf2..db5cc6f226 100644 --- a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf537_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_RTC_H_ diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h deleted file mode 100644 index c5151bb4ab..0000000000 --- a/include/asm-blackfin/arch-bf537/cplbtab.h +++ /dev/null @@ -1,408 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/* - * ICPLB TABLE - */ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -.byte4 0xffffffff; /* end of section - termination */ - -/* - * PAGE DESCRIPTOR TABLE - * - */ - -/* - * Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); - -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ - -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h index 4cb4c1502f..527d8a21f2 100644 --- a/include/asm-blackfin/arch-bf537/irq.h +++ b/include/asm-blackfin/arch-bf537/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf537_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h index 0810228397..eb01ca25ba 100644 --- a/include/asm-blackfin/arch-bf561/bf561_serial.h +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf561_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF561_SERIAL_H_ diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h index bc09922a5e..f4440a8d47 100644 --- a/include/asm-blackfin/arch-common/bf53x_rtc.h +++ b/include/asm-blackfin/arch-common/bf53x_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 7766c4ab06..438e50b8e8 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -1,7 +1,7 @@ /* * U-boot - bitops.h Routines for bit operations * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BITOPS_H diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 0ec92071b5..bf502a4e62 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_H_ diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h index 2190215971..451d29c3cf 100644 --- a/include/asm-blackfin/blackfin_defs.h +++ b/include/asm-blackfin/blackfin_defs.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin_defs.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_DEFS_H__ diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h index 3b4df4e134..a1a52a5c1a 100644 --- a/include/asm-blackfin/byteorder.h +++ b/include/asm-blackfin/byteorder.h @@ -1,7 +1,7 @@ /* * U-boot - byteorder.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BYTEORDER_H diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index dd695e10ad..9d8d9ecc87 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -50,7 +50,7 @@ #define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) #define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) /*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ @@ -61,20 +61,20 @@ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #else /*Write Through */ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #endif #if defined(CONFIG_BF561) -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4) /* SDRAM +L1 + ASYNC_Memory */ #else -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM + L1 + ASYNC_Memory */ #endif #endif /* _CPLB_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h index 108c2792a0..ed2b851e95 100644 --- a/include/asm-blackfin/current.h +++ b/include/asm-blackfin/current.h @@ -1,7 +1,7 @@ /* * U-boot - current.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_CURRENT_H diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index 0c01e9fb7d..ea0b3664e0 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -1,7 +1,7 @@ /* * U-boot - delay.h Routines for introducing delays * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_DELAY_H diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index b64d406992..eb84f11bdb 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -1,7 +1,7 @@ /* * U-boot - entry.h Routines for context saving and restoring * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_ENTRY_H @@ -27,7 +27,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> /* * Stack layout in 'ret_from_exception': diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h index 713bba0b22..0d2c618030 100644 --- a/include/asm-blackfin/errno.h +++ b/include/asm-blackfin/errno.h @@ -1,7 +1,7 @@ /* * U-boot - errno.h Error number defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_ERRNO_H diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index 1c738533c8..9024d0a06e 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -1,7 +1,7 @@ /* * U-boot - global_data.h Declarations for global data of u-boot * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_GBL_DATA_H diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h index baa3e0c5c3..9b360553cb 100644 --- a/include/asm-blackfin/hw_irq.h +++ b/include/asm-blackfin/hw_irq.h @@ -1,7 +1,7 @@ /* * U-boot - hw_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h @@ -24,8 +24,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <linux/config.h> diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h index 3c087c33ee..5d0ad06184 100644 --- a/include/asm-blackfin/io-kernel.h +++ b/include/asm-blackfin/io-kernel.h @@ -1,7 +1,7 @@ /* * U-boot - io-kernel.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 6bab6e766a..332d2c6437 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -1,7 +1,7 @@ /* * U-boot - io.h IO routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H @@ -37,6 +37,7 @@ extern void cf_outb(unsigned char val, volatile unsigned char *addr); static inline void sync(void) { + __builtin_bfin_ssync(); } /* diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index aede742120..1fff316881 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -1,7 +1,7 @@ /* * U-boot - irq.h Interrupt related header file * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file was based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -31,8 +31,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IRQ_H_ diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h index 18f0c36d24..4fc1acf0ba 100644 --- a/include/asm-blackfin/linkage.h +++ b/include/asm-blackfin/linkage.h @@ -1,7 +1,7 @@ /* * U-boot - linkage.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _LINUX_LINKAGE_H diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h index 4fea74c6c9..8bf94738ec 100644 --- a/include/asm-blackfin/machdep.h +++ b/include/asm-blackfin/machdep.h @@ -1,7 +1,7 @@ /* * U-boot - machdep.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_MACHDEP_H diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h index d9d8bf9ba2..cb448ad61e 100644 --- a/include/asm-blackfin/mem_init.h +++ b/include/asm-blackfin/mem_init.h @@ -1,7 +1,7 @@ /* * U-boot - mem_init.h Header file for memory initialization * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #if (CONFIG_MEM_MT48LC16M16A2TG_75 || \ diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h deleted file mode 100644 index d59828cdac..0000000000 --- a/include/asm-blackfin/page.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * U-boot - page.h - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _BLACKFIN_PAGE_H -#define _BLACKFIN_PAGE_H - -#include <linux/config.h> - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (4096) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifdef __KERNEL__ - -#include <asm/setup.h> - -#if PAGE_SHIFT < 13 -#define KTHREAD_SIZE (8192) -#else -#define KTHREAD_SIZE PAGE_SIZE -#endif - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr) clear_page(page) -#define copy_user_page(to, from, vaddr) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { - unsigned long pte; -} pte_t; -typedef struct { - unsigned long pmd[16]; -} pmd_t; -typedef struct { - unsigned long pgd; -} pgd_t; -typedef struct { - unsigned long pgprot; -} pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -/* Pure 2^n version of get_order */ -extern __inline__ int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)vaddr) -#define __va(paddr) phys_to_virt((unsigned long)paddr) - -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define PAGE_BUG(page) do { \ - BUG(); \ -} while (0) - -#endif - -#endif - -#endif diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h index 262473fc3d..cfd8f1fef3 100644 --- a/include/asm-blackfin/page_offset.h +++ b/include/asm-blackfin/page_offset.h @@ -1,7 +1,7 @@ /* * U-boot - page_offset.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h index f1f2b5ffc2..27889e8e85 100644 --- a/include/asm-blackfin/posix_types.h +++ b/include/asm-blackfin/posix_types.h @@ -1,7 +1,7 @@ /* * U-boot - posix_types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ARCH_BLACKFIN_POSIX_TYPES_H diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index df49bedc0a..6cd4f567fc 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -1,7 +1,7 @@ /* * U-boot - processor.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * include/asm-m68k/processor.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_BLACKFIN_PROCESSOR_H diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h index afd57773ac..f1b7d0064b 100644 --- a/include/asm-blackfin/ptrace.h +++ b/include/asm-blackfin/ptrace.h @@ -1,7 +1,7 @@ /* * U-boot - ptrace.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_PTRACE_H diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h index 9e6d817fc7..f309543742 100644 --- a/include/asm-blackfin/segment.h +++ b/include/asm-blackfin/segment.h @@ -1,7 +1,7 @@ /* * U-boot - segment.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SEGMENT_H diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h index a3c1715b4a..b6b82679ec 100644 --- a/include/asm-blackfin/setup.h +++ b/include/asm-blackfin/setup.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * asm/setup.h -- Definition of the Linux/Blackfin setup information @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SETUP_H diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h index fbef18618c..d280ffeeaa 100644 --- a/include/asm-blackfin/shared_resources.h +++ b/include/asm-blackfin/shared_resources.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _SHARED_RESOURCES_H_ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index aac6bc99f5..dd50207092 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -1,7 +1,7 @@ /* * U-boot - string.h String functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Changed by Lineo Inc. May 2001 */ @@ -30,7 +30,6 @@ #ifdef __KERNEL__ /* only set these up for kernel code */ #include <asm/setup.h> -#include <asm/page.h> #include <config.h> #include <asm/blackfin.h> diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index 0e53adfe0f..eda887fb62 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -1,7 +1,7 @@ /* * U-boot - system.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SYSTEM_H diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index 29e6eba6fa..b90cedacbc 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -1,7 +1,7 @@ /* * U-boot - traps.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/include/asm/traps.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h index 942ed275af..665a419f2b 100644 --- a/include/asm-blackfin/types.h +++ b/include/asm-blackfin/types.h @@ -1,7 +1,7 @@ /* * U-boot - types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_TYPES_H diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index e1a435a137..b4928da4f5 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -1,7 +1,7 @@ /* * U-boot - u-boot.h Structure declarations for board specific data * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,15 +21,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 61e2bfea7c..6e913bb85b 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -1,7 +1,7 @@ /* * U-boot - uaccess.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * Based on: include/asm-m68knommu/uaccess.h @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_UACCESS_H diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h index 769f5a089c..9eda9f8554 100644 --- a/include/asm-blackfin/virtconvert.h +++ b/include/asm-blackfin/virtconvert.h @@ -1,7 +1,7 @@ /* * U-boot - virtconvert.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_VIRT_CONVERT__ @@ -33,7 +33,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> #define mm_vtop(vaddr) ((unsigned long) vaddr) #define mm_ptov(vaddr) ((unsigned long) vaddr) diff --git a/include/asm-microblaze/suzaku.h b/include/asm-microblaze/microblaze_intc.h index c57a144d3a..6635aeacba 100644 --- a/include/asm-microblaze/suzaku.h +++ b/include/asm-microblaze/microblaze_intc.h @@ -1,7 +1,7 @@ /* - * (C) Copyright 2004 Atmark Techno, Inc. + * (C) Copyright 2007 Michal Simek * - * Yasushi SHOJI <yashi@atmark-techno.com> + * Michal SIMEK <monstr@monstr.cz> * * See file CREDITS for list of people who contributed to this * project. @@ -13,7 +13,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -22,6 +22,19 @@ * MA 02111-1307 USA */ -/* System Register (GPIO) */ -#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 -#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) +typedef volatile struct microblaze_intc_t { + int isr; /* interrupt status register */ + int ipr; /* interrupt pending register */ + int ier; /* interrupt enable register */ + int iar; /* interrupt acknowledge register */ + int sie; /* set interrupt enable bits */ + int cie; /* clear interrupt enable bits */ + int ivr; /* interrupt vector register */ + int mer; /* master enable register */ +} microblaze_intc_t; + +struct irq_action { + interrupt_handler_t *handler; /* pointer to interrupt rutine */ + void *arg; + int count; /* number of interrupt */ +}; diff --git a/include/asm-microblaze/microblaze_timer.h b/include/asm-microblaze/microblaze_timer.h new file mode 100644 index 0000000000..844c8db115 --- /dev/null +++ b/include/asm-microblaze/microblaze_timer.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define TIMER_ENABLE_ALL 0x400 /* ENALL */ +#define TIMER_PWM 0x200 /* PWMA0 */ +#define TIMER_INTERRUPT 0x100 /* T0INT */ +#define TIMER_ENABLE 0x080 /* ENT0 */ +#define TIMER_ENABLE_INTR 0x040 /* ENIT0 */ +#define TIMER_RESET 0x020 /* LOAD0 */ +#define TIMER_RELOAD 0x010 /* ARHT0 */ +#define TIMER_EXT_CAPTURE 0x008 /* CAPT0 */ +#define TIMER_EXT_COMPARE 0x004 /* GENT0 */ +#define TIMER_DOWN_COUNT 0x002 /* UDT0 */ +#define TIMER_CAPTURE_MODE 0x001 /* MDT0 */ + +typedef volatile struct microblaze_timer_t { + int control; /* control/statuc register TCSR */ + int loadreg; /* load register TLR */ + int counter; /* timer/counter register */ +} microblaze_timer_t; diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index c113b7ee0e..26bc875f86 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -49,6 +49,9 @@ typedef struct global_data { unsigned long scc_clk; unsigned long brg_clk; #endif +#if defined(CONFIG_MPC7448HPC2) + unsigned long mem_clk; +#endif #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h new file mode 100644 index 0000000000..114dc92db9 --- /dev/null +++ b/include/asm-ppc/gpio.h @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* 4xx PPC's have 2 GPIO controllers */ +#if defined(CONFIG_405EZ) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define GPIO_GROUP_MAX 2 +#else +#define GPIO_GROUP_MAX 1 +#endif + +#define GPIO_MAX 32 +#define GPIO_ALT1_SEL 0x40000000 +#define GPIO_ALT2_SEL 0x80000000 +#define GPIO_ALT3_SEL 0xc0000000 +#define GPIO_IN_SEL 0x40000000 +#define GPIO_MASK 0xc0000000 + +#define GPIO_VAL(gpio) (0x80000000 >> (gpio)) + +#ifndef __ASSEMBLY__ +typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; +typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; +typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t; + +typedef struct { + unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ +} gpio_param_s; +#endif + +void gpio_config(int pin, int in_out, int gpio_alt, int out_val); +void gpio_write_bit(int pin, int val); +void gpio_set_chip_configuration(void); diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index c380c54592..6c6480dbf7 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -189,7 +189,7 @@ #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" /* diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index d2af0e1dfc..79937dcd8f 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -342,8 +342,12 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 +#undef CONFIG_OF_FLAT_TREE #define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 + /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 8da29c4afc..a12c8da13e 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 Detlev Zundel, dzu@denx.de + * (C) Copyright 2006, 2007 Detlev Zundel, dzu@denx.de * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -237,18 +237,8 @@ /* * NAND flash support */ -#define CFG_NAND_LEGACY - #define CFG_MAX_NAND_DEVICE 1 -#define NAND_ChipID_UNKNOWN 0x00 -#define SECTORSIZE 512 -#define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define ADDR_COLUMN 1 -#define NAND_NO_RB - /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 9e02ca31b4..35b6a519e3 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -31,20 +31,18 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_ACADIA 1 /* Board is Acadia */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ -#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_ACADIA 1 /* Board is Acadia */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */ #define CONFIG_NO_SERIAL_EEPROM /*#undef CONFIG_NO_SERIAL_EEPROM*/ #ifdef CONFIG_NO_SERIAL_EEPROM - /*---------------------------------------------------------------------------- * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, * assuming a 66MHz input clock to the 405EZ. @@ -59,24 +57,125 @@ * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFE000000 #define CFG_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (384 * 1024)/* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (512 * 1024)/* Reserve 512 kB for malloc() */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xfe000000 #define CFG_MONITOR_BASE TEXT_BASE +#define CFG_CPLD_BASE 0x80000000 +#define CFG_NAND_ADDR 0xd0000000 #define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */ -/* - * Define here the location of the environment variables (FLASH). - * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only - * supported for backward compatibility. - */ +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */ + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else - #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * RAM (CRAM) + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_RAM 64 /* 64MB */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#if 0 /* test-only... */ +/*----------------------------------------------------------------------- + * SPI stuff - Define to include SPI control + *----------------------------------------------------------------------- + */ +#define CONFIG_SPI +#endif + +/*----------------------------------------------------------------------- + * Ethernet + *----------------------------------------------------------------------*/ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* # of rx buffers & descriptors*/ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" @@ -122,13 +221,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_NET_MULTI 1 -#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE @@ -166,7 +258,6 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ CFG_CMD_USB) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -174,76 +265,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* +/*----------------------------------------------------------------------- * Miscellaneous configurable options - */ + *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ -#define CFG_BASE_BAUD 691200 -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F - -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_EEPROM_ADDR (0xa8>>1) -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CFG_DTT_MAX_TEMP 70 -#define CFG_DTT_LOW_TEMP -30 -#define CFG_DTT_HYSTERESIS 3 - -#if 0 /* test-only... */ -/*----------------------------------------------------------------------- - * SPI stuff - Define to include SPI control - *----------------------------------------------------------------------- - */ -#define CONFIG_SPI -#endif - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -251,39 +300,13 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} -#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ -#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ - -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) -#endif - #ifdef TEST_ONLY_NAND /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE (CFG_NAND + CFG_NAND_CS) +#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ #endif @@ -297,50 +320,42 @@ #endif /*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CFG_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CFG_OCM_DATA_ADDR 0xF8000000 -#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ -#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ -#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ - -#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup - */ -#define CFG_NAND 0xd0000000 + *----------------------------------------------------------------------*/ #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 0 (Flash) initialization */ +/* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 -#define CFG_EBC_PB0CR 0xfe0bc000 /* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit */ +#define CFG_EBC_PB0CR 0xfe0bc000 -/* Memory Bank 1 (CRAM) initialization */ +/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ +/* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 #define CFG_EBC_PB1CR 0x000bc000 -/* Memory Bank 2 (CRAM) initialization */ +/* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 /* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 4 (CPLD) initialization */ +/* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 -#define CFG_EBC_PB4CR 0x80018000 /* BAS=0x000,BS=16MB,BU=R/W,BW=32bit */ +#define CFG_EBC_PB4CR (CFG_CPLD_BASE | 0x18000) #define CFG_EBC_CFG 0xf8400000 /*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_CRAM_CLK 8 +#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_ADV 10 +#define CFG_GPIO_CRAM_CRE (32 + 21) + +/*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) * * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs @@ -389,25 +404,6 @@ #define CFG_GPIO1_TSRL 0x00000000 #define CFG_GPIO1_TCR 0xFFFF8014 -/*----------------------------------------------------------------------- - * EPLD Regs. - */ -#define EPLD_BASE 0x80000000 -#define EPLD_ETHRSTBOOT 0x10 -#define EPLD_CTRL 0x14 -#define EPLD_MUXOE 0x16 - -/* - * State definations - */ -#define LOAK_INIT 0x494e4954 /* ASCII "INIT" */ -#define LOAK_NONE 0x4e4f4e45 /* ASCII "NONE" */ -#define LOAK_CRAM 0x4352414d /* ASCII "CRAM" */ -#define LOAK_PSRAM 0x50535241 /* ASCII "PSRA" - PSRAM */ -#define LOAK_OCM 0x4f434d20 /* ASCII "OCM " */ -#define LOAK_ZERO 0x5a45524f /* ASCII "ZERO" */ -#define LOAK_SPL 0x53504c20 /* ASCII "SPL" */ - /* * Internal Definitions * diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 458ebabeb9..beaf3851dc 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -62,11 +62,14 @@ */ #define CFG_PLL0_OPT 0x04 -#define CFG_USART1 1 - -#define CFG_CONSOLE_UART_DEV DEVICE_USART1 +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 /* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + #define CONFIG_CMDLINE_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -75,16 +78,47 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS \ - "console=ttyUS0 root=/dev/mtdblock1 fbmem=600k" + "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k" + +#define CONFIG_BOOTCOMMAND \ + "fsload; bootm $(fileaddr)" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * These are "locally administered ethernet addresses" generated by + * ./tools/gen_eth_addr + * + * After booting the board for the first time, new addresses should be + * generated and assigned to the environment variables "ethaddr" and + * "eth1addr". + */ +#define CONFIG_ETHADDR "6a:87:71:14:cd:cb" +#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6" +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_NET_MULTI 1 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \ + | CONFIG_BOOTP_GATEWAY) #define CONFIG_COMMANDS (CFG_CMD_BDI \ | CFG_CMD_LOADS \ | CFG_CMD_LOADB \ - /* | CFG_CMD_IMI */ \ + | CFG_CMD_IMI \ /* | CFG_CMD_CACHE */ \ | CFG_CMD_FLASH \ | CFG_CMD_MEMORY \ - /* | CFG_CMD_NET */ \ + | CFG_CMD_NET \ | CFG_CMD_ENV \ /* | CFG_CMD_IRQ */ \ | CFG_CMD_BOOTD \ @@ -96,7 +130,7 @@ /* | CFG_CMD_I2C */ \ | CFG_CMD_REGINFO \ /* | CFG_CMD_DATE */ \ - /* | CFG_CMD_DHCP */ \ + | CFG_CMD_DHCP \ /* | CFG_CMD_AUTOSCRIPT */ \ /* | CFG_CMD_MII */ \ | CFG_CMD_MISC \ @@ -106,19 +140,22 @@ /* | CFG_CMD_SAVES */ \ /* | CFG_CMD_SPI */ \ /* | CFG_CMD_PING */ \ - /* | CFG_CMD_MMC */ \ - /* | CFG_CMD_FAT */ \ - /* | CFG_CMD_IMLS */ \ + | CFG_CMD_MMC \ + | CFG_CMD_FAT \ + | CFG_CMD_IMLS \ /* | CFG_CMD_ITEST */ \ - /* | CFG_CMD_EXT2 */ \ + | CFG_CMD_EXT2 \ + | CFG_CMD_JFFS2 \ ) #include <cmd_confdefs.h> #define CONFIG_ATMEL_USART 1 +#define CONFIG_MACB 1 #define CONFIG_PIO2 1 #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 @@ -150,16 +187,8 @@ #define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) #define CFG_MALLOC_LEN (256*1024) -#define CFG_MALLOC_END \ - ({ \ - DECLARE_GLOBAL_DATA_PTR; \ - CFG_SDRAM_BASE + gd->sdram_size; \ - }) -#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN) - #define CFG_DMA_ALLOC_LEN (16384) -#define CFG_DMA_ALLOC_END (CFG_MALLOC_START) -#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN) + /* Allow 2MB for the kernel run-time image */ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) #define CFG_BOOTPARAMS_LEN (16 * 1024) diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 1606d0da17..7f55366ca5 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -78,7 +78,7 @@ #define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) -#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */ +#define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) diff --git a/include/configs/ml401.h b/include/configs/ml401.h new file mode 100644 index 0000000000..cb159e79dc --- /dev/null +++ b/include/configs/ml401.h @@ -0,0 +1,230 @@ +/* + * (C) Copyright 2007 Czech Technical University. + * + * Michal SIMEK <monstr@seznam.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/ml401/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define CONFIG_ML401 1 /* ML401 Board */ + +/* uart */ +#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR +#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } + +/* setting reset address */ +#define CFG_RESET_ADDRESS TEXT_BASE + +/* ethernet */ +#define CONFIG_EMACLITE 1 +#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES + +/* gpio */ +#define CFG_GPIO_0 1 +#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR + +/* interrupt controller */ +#define CFG_INTC_0 1 +#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS + +/* timer */ +#define CFG_TIMER_0 1 +#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) + +/* + * memory layout - Example + * TEXT_BASE = 0x1200_0000; + * CFG_SRAM_BASE = 0x1000_0000; + * CFG_SRAM_SIZE = 0x0400_0000; + * + * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 + * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 + * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 + * + * 0x1000_0000 CFG_SDRAM_BASE + * FREE + * 0x1200_0000 TEXT_BASE + * U-BOOT code + * 0x1202_0000 + * FREE + * + * STACK + * 0x13F7_F000 CFG_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x11FB_F000 CFG_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x13FF_F000 CFG_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CFG_SDRAM_BASE XILINX_RAM_START +#define CFG_SDRAM_SIZE XILINX_RAM_SIZE +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ + +/* monitor code */ +#define SIZE 0x40000 +#define CFG_MONITOR_LEN SIZE +#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) +#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN SIZE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +/* stack */ +#define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE + +/*#define RAMENV */ +#define FLASH + +#ifdef FLASH + #define CFG_FLASH_BASE XILINX_FLASH_START + #define CFG_FLASH_SIZE XILINX_FLASH_SIZE + #define CFG_FLASH_CFI 1 + #define CFG_FLASH_CFI_DRIVER 1 + #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ + #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ + #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + + #ifdef RAMENV + #define CFG_ENV_IS_NOWHERE 1 + #define CFG_ENV_SIZE 0x1000 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + + #else /* !RAMENV */ + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR 0x40000 + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + #endif /* !RAMBOOT */ +#else /* !FLASH */ + /* ENV in RAM */ + #define CFG_NO_FLASH 1 + #define CFG_ENV_IS_NOWHERE 1 + #define CFG_ENV_SIZE 0x1000 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +#endif /* !FLASH */ + +#ifdef FLASH + #ifdef RAMENV + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_IMLS |\ + CFG_CMD_FLASH |\ + CFG_CMD_PING \ + ) + #else /* !RAMENV */ + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_IMLS |\ + CFG_CMD_FLASH |\ + CFG_CMD_PING |\ + CFG_CMD_ENV |\ + CFG_CMD_SAVES \ + ) + + #endif + +#else /* !FLASH */ + #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_MISC |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_IRQ |\ + CFG_CMD_ASKENV |\ + CFG_CMD_BDI |\ + CFG_CMD_RUN |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_IMI |\ + CFG_CMD_NET |\ + CFG_CMD_CACHE |\ + CFG_CMD_PING \ + ) +#endif /* !FLASH */ +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Miscellaneous configurable options */ +#define CFG_PROMPT "U-Boot-mONStR> " +#define CFG_CBSIZE 512 /* size of console buffer */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ +#define CFG_MAXARGS 15 /* max number of command args */ +#define CFG_LONGHELP +#define CFG_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CFG_USR_EXCEP /* user exception */ +#define CFG_HZ 1000 + +/* system ace */ +/*#define CONFIG_SYSTEMACE +#define DEBUG_SYSTEMACE +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION +*/ +#endif /* __CONFIG_H */ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h new file mode 100644 index 0000000000..243a3f6c8f --- /dev/null +++ b/include/configs/mpc7448hpc2.h @@ -0,0 +1,411 @@ +/* + * Copyright (c) 2005 Freescale Semiconductor, Inc. + * + * (C) Copyright 2006 + * Alex Bounine , Tundra Semiconductor Corp. + * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board specific configuration options for Freescale + * MPC7448HPC2 (High-Performance Computing II) (Taiga) board + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* Board Configuration Definitions */ +/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */ + +#define CONFIG_MPC7448HPC2 + +#define CONFIG_74xx +#define CONFIG_750FX /* this option to enable init of extended BATs */ +#define CONFIG_ALTIVEC /* undef to disable */ + +#define CFG_BOARD_NAME "MPC7448 HPC II" +#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" + +#define CFG_OCN_CLK 133000000 /* 133 MHz */ +#define CFG_CONFIG_BUS_CLK 133000000 + +#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */ + +#undef CONFIG_ECC /* disable ECC support */ + +/* Board-specific Initialization Functions to be called */ +#define CFG_BOARD_ASM_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_HAS_ETH1 + +#define CONFIG_ENV_OVERWRITE + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ + +/*#define CFG_HUSH_PARSER */ +#undef CFG_HUSH_PARSER + +#define CFG_PROMPT_HUSH_PS2 "> " + +/* Pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,7448@0" +#define OF_TSI "tsi108@c0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808" + +/* + * The following defines let you select what serial you want to use + * for your console driver. + * + * what to do: + * If you have hacked a serial cable onto the second DUART channel, + * change the CFG_DUART port from 1 to 0 below. + * + */ + +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK CFG_OCN_CLK * 8 + +#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808) +#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08) +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#undef CONFIG_BOOTARGS +/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" + * to mount root filesystem over NFS;echo" */ + +#if (CONFIG_BOOTDELAY >= 0) +#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\ + setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \ + ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; " + +#define CONFIG_BOOTARGS "console=ttyS0,115200" +#endif + +#undef CONFIG_EXTRA_ENV_SETTINGS + +#define CONFIG_SERIAL "No. 1" + +/* Networking Configuration */ + +#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ + +#define CONFIG_TSI108_ETH +#define CONFIG_TSI108_ETH_NUM_PORTS 2 + +#define CONFIG_NET_MULTI + +#define CONFIG_BOOTFILE zImage.initrd.elf +#define CONFIG_LOADADDR 0x400000 + +/*-------------------------------------------------------------------------- */ + +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_ASKENV \ + | CFG_CMD_CACHE \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C \ + | CFG_CMD_SDRAM \ + | CFG_CMD_EEPROM \ + | CFG_CMD_FLASH \ + | CFG_CMD_ENV \ + | CFG_CMD_BSP \ + | CFG_CMD_DHCP \ + | CFG_CMD_PING \ + | CFG_CMD_DATE) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/*set date in u-boot*/ +#define CONFIG_RTC_M48T35A +#define CFG_NVRAM_BASE_ADDR 0xfc000000 +#define CFG_NVRAM_SIZE 0x8000 +/* + * Miscellaneous configurable options + */ +#define CONFIG_VERSION_VARIABLE 1 +#define CONFIG_TSI108_I2C + +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00400000 /* default load address */ + +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ + +/* + * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * To an unused memory region. The stack will remain in cache until RAM + * is initialized + */ +#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ +#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ + +#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ + +#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ +#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ + +#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ +#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ + +#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ + +#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ + +#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ + +#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */ +#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ + +#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */ + +#define PCI0_IO_BASE_BOOTM 0xfd000000 + +#define CFG_RESET_ADDRESS 0x3fffff00 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ + +/* Peripheral Device section */ + +/* + * Resources on the Tsi108 + */ + +#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ +#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ + +#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */ + +#undef DISABLE_PBM + +/* + * PCI stuff + * + */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_TSI108_PCI /* include tsi108 pci support */ + +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +/* PCI MEMORY MAP section */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +/* PCI Memory Space */ +#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS) +#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */ +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ + +/* PCI I/O Space */ +#define CFG_PCI_IO_BUS 0x00000000 +#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ + +#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */ + +#define _IO_BASE 0x00000000 /* points to PCI I/O space */ + +/* PCI Config Space mapping */ +#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ +#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */ + +#define CFG_IBAT0U 0xFE0003FF +#define CFG_IBAT0L 0xFE000002 + +#define CFG_IBAT1U 0x00007FFF +#define CFG_IBAT1L 0x00000012 + +#define CFG_IBAT2U 0x80007FFF +#define CFG_IBAT2L 0x80000022 + +#define CFG_IBAT3U 0x00000000 +#define CFG_IBAT3L 0x00000000 + +#define CFG_IBAT4U 0x00000000 +#define CFG_IBAT4L 0x00000000 + +#define CFG_IBAT5U 0x00000000 +#define CFG_IBAT5L 0x00000000 + +#define CFG_IBAT6U 0x00000000 +#define CFG_IBAT6L 0x00000000 + +#define CFG_IBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 + +#define CFG_DBAT0U 0xE0003FFF +#define CFG_DBAT0L 0xE000002A + +#define CFG_DBAT1U 0x00007FFF +#define CFG_DBAT1L 0x00000012 + +#define CFG_DBAT2U 0x00000000 +#define CFG_DBAT2L 0x00000000 + +#define CFG_DBAT3U 0xC0000003 +#define CFG_DBAT3L 0xC000002A + +#define CFG_DBAT4U 0x00000000 +#define CFG_DBAT4L 0x00000000 + +#define CFG_DBAT5U 0x00000000 +#define CFG_DBAT5L 0x00000000 + +#define CFG_DBAT6U 0x00000000 +#define CFG_DBAT6L 0x00000000 + +#define CFG_DBAT7U 0x00000000 +#define CFG_DBAT7L 0x00000000 + +/* I2C addresses for the two DIMM SPD chips */ +#define DIMM0_I2C_ADDR 0x51 +#define DIMM1_I2C_ADDR 0x52 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA + +#define PHYS_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_SECT (128) + +#define CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_ADDR 0xFC000000 + +#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * L2CR setup -- make sure this is right for your board! + * look in include/mpc74xx.h for the defines used here + */ +#undef CFG_L2 + +#define L2_INIT 0 +#define L2_ENABLE (L2_INIT | L2CR_L2E) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CFG_SERIAL_HANG_IN_EXCEPTION +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 8298084f1e..6b6acfa875 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -133,8 +133,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with S\n" -#define CONFIG_AUTOBOOT_DELAY_STR "S" /* 1st "password" */ +#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" +#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */ #endif /* @@ -416,11 +416,11 @@ extern unsigned long offsetOfEnvironment; #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -/* No command line, one static partition Partition 3 contains jffs2 rootfs */ +/* No command line, one static partition */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00c00000 +#define CONFIG_JFFS2_PART_SIZE 0x01000000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 29f3b408d2..1f19621f44 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -33,7 +33,6 @@ *----------------------------------------------------------------------*/ /* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ #ifndef CONFIG_RAINIER -#define CONFIG_SEQUOIA 1 /* Board is Sequoia */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #else #define CONFIG_440GRX 1 /* Specific PPC440GRx */ @@ -75,9 +74,7 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ - #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) @@ -381,9 +378,6 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_FLASH CFG_FLASH_BASE -#define CFG_NAND 0xD0000000 -#define CFG_CPLD 0xC0000000 /* * On Sequoia CS0 and CS3 are switched when configuring for NAND booting @@ -392,25 +386,25 @@ #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03017200 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) +#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000) /* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) #else #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ /* Memory Bank 3 (NOR-FLASH) initialization */ #define CFG_EBC_PB3AP 0x03017200 -#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) +#define CFG_EBC_PB3CR (CFG_FLASH_BASE | 0xda000) /* Memory Bank 0 (NAND-FLASH) initialization */ #define CFG_EBC_PB0AP 0x018003c0 -#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000) +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) #endif /* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x24814580 -#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000) +#define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x38000) /*----------------------------------------------------------------------- * NAND FLASH diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 1ee6be174f..8224555896 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -44,12 +44,17 @@ #define CFG_FLASH_SIZE 0x00400000 #define CFG_RESET_ADDRESS 0xfff00100 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024)) +#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024)) #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024)) #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 115200 } +/* System Register (GPIO) */ +#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 +#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) + #define CONFIG_COMMANDS (CONFIG__CMD_DFL) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h new file mode 100644 index 0000000000..a2f48102f0 --- /dev/null +++ b/include/configs/xupv2p.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2007 Czech Technical University. + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/xupv2p/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define CONFIG_XUPV2P 1 + +/* uart */ +#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR +#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } + +/* ethernet */ +#define CONFIG_EMAC 1 +#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES + +/* + * setting reset address + * + * TEXT_BASE is set to place, where the U-BOOT run in RAM, but + * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS + * to FLASH memory and after loading bitstream jump to FLASH. + * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze + * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. + */ +#define CFG_RESET_ADDRESS 0x36000000 + +/* gpio */ +#define CFG_GPIO_0 1 +#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR + +/* interrupt controller */ +#define CFG_INTC_0 1 +#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS + +/* timer */ +#define CFG_TIMER_0 1 +#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) + +/* + * memory layout - Example + * TEXT_BASE = 0x3600_0000; + * CFG_SRAM_BASE = 0x3000_0000; + * CFG_SRAM_SIZE = 0x1000_0000; + * + * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 + * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 + * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 + * + * 0x3000_0000 CFG_SDRAM_BASE + * FREE + * 0x3600_0000 TEXT_BASE + * U-BOOT code + * 0x3602_0000 + * FREE + * + * STACK + * 0x3FF7_F000 CFG_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x3FFB_F000 CFG_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x3FFF_F000 CFG_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CFG_SDRAM_BASE XILINX_RAM_START +#define CFG_SDRAM_SIZE XILINX_RAM_SIZE +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ + +/* monitor code */ +#define SIZE 0x40000 +#define CFG_MONITOR_LEN SIZE +#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) +#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN SIZE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +/* stack */ +#define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE + +#define CFG_NO_FLASH 1 +#define CFG_ENV_IS_NOWHERE 1 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_IRQ |\ + CFG_CMD_BDI |\ + CFG_CMD_NET |\ + CFG_CMD_IMI |\ + CFG_CMD_ECHO |\ + CFG_CMD_CACHE |\ + CFG_CMD_RUN |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_ASKENV |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_MISC |\ + CFG_CMD_PING \ + ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Miscellaneous configurable options */ +#define CFG_PROMPT "U-Boot-mONStR> " +#define CFG_CBSIZE 512 /* size of console buffer */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ +#define CFG_MAXARGS 15 /* max number of command args */ +#define CFG_LONGHELP +#define CFG_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CFG_USR_EXCEP /* user exception */ +#define CFG_HZ 1000 + +#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ + "base 0;" \ + "echo" + + +/* system ace */ +/*#define CONFIG_SYSTEMACE +#define DEBUG_SYSTEMACE +#define CFG_SYSTEMACE_BASE 0xCF000000 +#define CFG_SYSTEMACE_WIDTH 16 +#define CONFIG_DOS_PARTITION*/ + +#endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b59f75b9d0..0a41dff5fb 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -32,7 +32,6 @@ *----------------------------------------------------------------------*/ /* This config file is used for Yosemite (440EP) and Yellowstone (440GR)*/ #ifndef CONFIG_YELLOWSTONE -#define CONFIG_YOSEMITE 1 /* Board is Yosemite */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_HOSTNAME yosemite #else diff --git a/include/configs/yucca.h b/include/configs/yucca.h index eb4859c3e9..7f8b0228ae 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -120,7 +120,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ /*----------------------------------------------------------------------- * I2C diff --git a/include/fdt.h b/include/fdt.h new file mode 100644 index 0000000000..3dd3aca3b6 --- /dev/null +++ b/include/fdt.h @@ -0,0 +1,79 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/include/asm-microblaze/platform.h b/include/fdt_support.h index 2096cce45e..a276834740 100644 --- a/include/asm-microblaze/platform.h +++ b/include/fdt_support.h @@ -1,7 +1,6 @@ /* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> + * (C) Copyright 2007 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com * * See file CREDITS for list of people who contributed to this * project. @@ -22,8 +21,22 @@ * MA 02111-1307 USA */ -#include <config.h> +#ifndef __FDT_SUPPORT_H +#define __FDT_SUPPORT_H + +#ifdef CONFIG_OF_LIBFDT + +#include <fdt.h> + +int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force); -#ifdef CONFIG_SUZAKU -#include <asm/suzaku.h> +#ifdef CONFIG_OF_HAS_UBOOT_ENV +int fdt_env(void *fdt); #endif + +#ifdef CONFIG_OF_HAS_BD_T +int fdt_bd_t(void *fdt); +#endif + +#endif /* ifdef CONFIG_OF_LIBFDT */ +#endif /* ifndef __FDT_SUPPORT_H */ diff --git a/include/libfdt.h b/include/libfdt.h new file mode 100644 index 0000000000..f8bac73a31 --- /dev/null +++ b/include/libfdt.h @@ -0,0 +1,146 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _LIBFDT_H +#define _LIBFDT_H + +#include <fdt.h> +#include <libfdt_env.h> + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 +#define FDT_ERR_EXISTS 2 +#define FDT_ERR_NOSPACE 3 + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 +#define FDT_ERR_BADPATH 5 +#define FDT_ERR_BADSTATE 6 + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 7 +#define FDT_ERR_BADMAGIC 8 +#define FDT_ERR_BADVERSION 9 +#define FDT_ERR_BADSTRUCTURE 10 +#define FDT_ERR_BADLAYOUT 11 + +#define FDT_ERR_MAX 11 + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define fdt_set_header(fdt, field, val) \ + ((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val) + +int fdt_check_header(const void *fdt); + +void *fdt_offset_ptr(const void *fdt, int offset, int checklen); + +#define fdt_offset_ptr_typed(fdt, offset, var) \ + ((typeof(var))(fdt_offset_ptr((fdt), (offset), sizeof(*(var))))) + +int fdt_move(const void *fdt, void *buf, int bufsize); + +/* Read-only functions */ +char *fdt_string(const void *fdt, int stroffset); + +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +int fdt_path_offset(const void *fdt, const char *path); + +struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); + +uint32_t fdt_next_tag(const void *fdt, int offset, + int *nextoffset, char **namep); +int fdt_num_reservemap(void *fdt, int *used, int *total); +int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re); + +/* Write-in-place functions */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +#define fdt_setprop_inplace_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = val; \ + fdt_setprop_inplace(fdt, nodeoffset, name, &x, sizeof(x)); \ + }) + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); +int fdt_nop_node(void *fdt, int nodeoffset); +int fdt_insert_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size); + + +/* Sequential-write functions */ +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +#define fdt_property_typed(fdt, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_property((fdt), (name), &x, sizeof(x)); \ + }) +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); +int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size); + +/* Read-write functions */ +int fdt_open_into(void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +#define fdt_setprop_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_setprop((fdt), (nodeoffset), (name), &x, sizeof(x)); \ + }) +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +int fdt_delprop(void *fdt, int nodeoffset, const char *name); +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); +int fdt_del_node(void *fdt, int nodeoffset); + +/* Extra functions */ +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/include/libfdt_env.h b/include/libfdt_env.h new file mode 100644 index 0000000000..e746314b1e --- /dev/null +++ b/include/libfdt_env.h @@ -0,0 +1,36 @@ +/* + * libfdt - Flat Device Tree manipulation (build/run environment adaptation) + * Copyright (C) 2007 Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com + * Original version written by David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include <stddef.h> +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/string.h> + +struct fdt_header *fdt; /* Pointer to the working fdt */ + +#define fdt32_to_cpu(x) __be32_to_cpu(x) +#define cpu_to_fdt32(x) __cpu_to_be32(x) +#define fdt64_to_cpu(x) __be64_to_cpu(x) +#define cpu_to_fdt64(x) __cpu_to_be64(x) + +#endif /* _LIBFDT_ENV_H */ diff --git a/include/linux/mii.h b/include/linux/mii.h new file mode 100644 index 0000000000..7c63095fd4 --- /dev/null +++ b/include/linux/mii.h @@ -0,0 +1,158 @@ +/* + * linux/mii.h: definitions for MII-compatible transceivers + * Originally drivers/net/sunhme.h. + * + * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) + */ + +#ifndef __LINUX_MII_H__ +#define __LINUX_MII_H__ + +/* Generic MII registers. */ + +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ + +/* Basic mode control register. */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ +#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset the DP83840 */ + +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x07c0 /* Unused... */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ + +/* Advertisement control register. */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) + +/* Link partner ability register. */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_RESV 0x1c00 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ + +#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) +#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) + +/* Expansion register for auto-negotiation. */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ + +/* N-way test register. */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ + + +/** + * mii_nway_result + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * Given a set of MII abilities, check each bit and returns the + * currently supported media, in the priority order defined by + * IEEE 802.3u. We use LPA_xxx constants but note this is not the + * value of LPA solely, as described above. + * + * The one exception to IEEE 802.3u is that 100baseT4 is placed + * between 100T-full and 100T-half. If your phy does not support + * 100T4 this is fine. If your phy places 100T4 elsewhere in the + * priority order, you will need to roll your own function. + */ +static inline unsigned int mii_nway_result (unsigned int negotiated) +{ + unsigned int ret; + + if (negotiated & LPA_100FULL) + ret = LPA_100FULL; + else if (negotiated & LPA_100BASE4) + ret = LPA_100BASE4; + else if (negotiated & LPA_100HALF) + ret = LPA_100HALF; + else if (negotiated & LPA_10FULL) + ret = LPA_10FULL; + else + ret = LPA_10HALF; + + return ret; +} + +/** + * mii_duplex + * @duplex_lock: Non-zero if duplex is locked at full + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * A small helper function for a common case. Returns one + * if the media is operating or locked at full duplex, and + * returns zero otherwise. + */ +static inline unsigned int mii_duplex (unsigned int duplex_lock, + unsigned int negotiated) +{ + if (duplex_lock) + return 1; + if (mii_nway_result(negotiated) & LPA_DUPLEX) + return 1; + return 0; +} + + +#endif /* __LINUX_MII_H__ */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 4d05aa92d9..43fd53fc98 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -7,7 +7,7 @@ extern "C" { #endif -#define S_IFMT 00170000 /* type of file */ +#define S_IFMT 00170000 /* type of file */ #define S_IFSOCK 0140000 /* named socket */ #define S_IFLNK 0120000 /* symbolic link */ #define S_IFREG 0100000 /* regular */ @@ -49,20 +49,20 @@ struct stat { ino_t st_ino; /* file id */ mode_t st_mode; /* ownership/protection */ nlink_t st_nlink; /* number of links */ - uid_t st_uid; /* user id */ - gid_t st_gid; /* group id */ + uid_t st_uid; /* user id */ + gid_t st_gid; /* group id */ dev_t st_rdev; off_t st_size; /* file size in # of bytes */ - unsigned long st_blksize; /* block size */ - unsigned long st_blocks; /* file size in # of blocks */ - unsigned long st_atime; /* time file was last accessed */ - unsigned long __unused1; - unsigned long st_mtime; /* time file was last modified */ - unsigned long __unused2; - unsigned long st_ctime; /* time file status was last changed */ - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_blksize; /* block size */ + unsigned long st_blocks; /* file size in # of blocks */ + unsigned long st_atime; /* time file was last accessed */ + unsigned long __unused1; + unsigned long st_mtime; /* time file was last modified */ + unsigned long __unused2; + unsigned long st_ctime; /* time file status was last changed */ + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* __PPC__ */ @@ -97,34 +97,59 @@ struct stat { #if defined (__MIPS__) struct stat { - dev_t st_dev; - long st_pad1[3]; - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - dev_t st_rdev; - long st_pad2[2]; - off_t st_size; - long st_pad3; + dev_t st_dev; + long st_pad1[3]; + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + dev_t st_rdev; + long st_pad2[2]; + off_t st_size; + long st_pad3; /* * Actually this should be timestruc_t st_atime, st_mtime and st_ctime * but we don't have it under Linux. */ - time_t st_atime; - long reserved0; - time_t st_mtime; - long reserved1; - time_t st_ctime; - long reserved2; - long st_blksize; - long st_blocks; - long st_pad4[14]; + time_t st_atime; + long reserved0; + time_t st_mtime; + long reserved1; + time_t st_ctime; + long reserved2; + long st_blksize; + long st_blocks; + long st_pad4[14]; }; #endif /* __MIPS__ */ +#if defined(__AVR32__) + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __AVR32__ */ + #ifdef __cplusplus } #endif diff --git a/include/ppc405.h b/include/ppc405.h index 08f10d27b2..a2503a93d2 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -570,6 +570,8 @@ #define SDR_ICTX0_STAT 0x40000000 #define SDR_ICTX1_STAT 0x20000000 +#define SDR_PINSTP 0x40 + /****************************************************************************** * Control ******************************************************************************/ diff --git a/include/ppc440.h b/include/ppc440.h index 9b15c2c565..bc1d7aad73 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -148,7 +148,7 @@ #define sdrcfgd (SDR_DCR_BASE+0x1) #define sdr_sdstp0 0x0020 /* */ #define sdr_sdstp1 0x0021 /* */ -#define sdr_pinstp 0x0040 +#define SDR_PINSTP 0x0040 #define sdr_sdcs 0x0060 #define sdr_ecid0 0x0080 #define sdr_ecid1 0x0081 @@ -3290,29 +3290,6 @@ #define GPIO1_ISR3H (GPIO1_BASE+0x44) #endif -#define GPIO_GROUP_MAX 2 -#define GPIO_MAX 32 -#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ -#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ -#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ -#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ -#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ - /* For the other GPIO number, you must shift */ - -#define GPIO_VAL(gpio) (0x80000000 >> (gpio)) - -#ifndef __ASSEMBLY__ - -typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; -typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; - -typedef struct { unsigned long add; /* gpio core base address */ - gpio_driver_t in_out; /* Driver Setting */ - gpio_select_t alt_nb; /* Selected Alternate */ -} gpio_param_s; - -#endif /* __ASSEMBLY__ */ - /* * Macros for accessing the indirect EBC registers */ diff --git a/include/serial.h b/include/serial.h index 48800595d7..f7412fd173 100644 --- a/include/serial.h +++ b/include/serial.h @@ -23,7 +23,7 @@ extern struct serial_device serial_scc_device; extern struct serial_device * default_serial_console (void); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ - || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) + || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CFG_NS16550_SERIAL) diff --git a/include/tsi108.h b/include/tsi108.h new file mode 100644 index 0000000000..ba62e7abe6 --- /dev/null +++ b/include/tsi108.h @@ -0,0 +1,221 @@ +/***************************************************************************** + * (C) Copyright 2003; Tundra Semiconductor Corp. + * (C) Copyright 2006; Freescale Semiconductor Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + *****************************************************************************/ + +/* + * FILENAME: tsi108.h + * + * Originator: Alex Bounine + * + * DESCRIPTION: + * Common definitions for the Tundra Tsi108 bridge chip + * + */ + +#ifndef _TSI108_H_ +#define _TSI108_H_ + +#define TSI108_HLP_REG_OFFSET (0x0000) +#define TSI108_PCI_REG_OFFSET (0x1000) +#define TSI108_CLK_REG_OFFSET (0x2000) +#define TSI108_PB_REG_OFFSET (0x3000) +#define TSI108_SD_REG_OFFSET (0x4000) +#define TSI108_MPIC_REG_OFFSET (0x7400) + +#define PB_ID (0x000) +#define PB_RSR (0x004) +#define PB_BUS_MS_SELECT (0x008) +#define PB_ISR (0x00C) +#define PB_ARB_CTRL (0x018) +#define PB_PVT_CTRL2 (0x034) +#define PB_SCR (0x400) +#define PB_ERRCS (0x404) +#define PB_AERR (0x408) +#define PB_REG_BAR (0x410) +#define PB_OCN_BAR1 (0x414) +#define PB_OCN_BAR2 (0x418) +#define PB_SDRAM_BAR1 (0x41C) +#define PB_SDRAM_BAR2 (0x420) +#define PB_MCR (0xC00) +#define PB_MCMD (0xC04) + +#define HLP_B0_ADDR (0x000) +#define HLP_B1_ADDR (0x010) +#define HLP_B2_ADDR (0x020) +#define HLP_B3_ADDR (0x030) + +#define HLP_B0_MASK (0x004) +#define HLP_B1_MASK (0x014) +#define HLP_B2_MASK (0x024) +#define HLP_B3_MASK (0x034) + +#define HLP_B0_CTRL0 (0x008) +#define HLP_B1_CTRL0 (0x018) +#define HLP_B2_CTRL0 (0x028) +#define HLP_B3_CTRL0 (0x038) + +#define HLP_B0_CTRL1 (0x00C) +#define HLP_B1_CTRL1 (0x01C) +#define HLP_B2_CTRL1 (0x02C) +#define HLP_B3_CTRL1 (0x03C) + +#define PCI_CSR (0x004) +#define PCI_P2O_BAR0 (0x010) +#define PCI_P2O_BAR0_UPPER (0x014) +#define PCI_P2O_BAR2 (0x018) +#define PCI_P2O_BAR2_UPPER (0x01C) +#define PCI_P2O_BAR3 (0x020) +#define PCI_P2O_BAR3_UPPER (0x024) + +#define PCI_MISC_CSR (0x040) +#define PCI_P2O_PAGE_SIZES (0x04C) + +#define PCI_PCIX_STAT (0x0F4) + +#define PCI_IRP_STAT (0x184) + +#define PCI_PFAB_BAR0 (0x204) +#define PCI_PFAB_BAR0_UPPER (0x208) +#define PCI_PFAB_IO (0x20C) +#define PCI_PFAB_IO_UPPER (0x210) + +#define PCI_PFAB_MEM32 (0x214) +#define PCI_PFAB_MEM32_REMAP (0x218) +#define PCI_PFAB_MEM32_MASK (0x21C) + +#define CG_PLL0_CTRL0 (0x210) +#define CG_PLL0_CTRL1 (0x214) +#define CG_PLL1_CTRL0 (0x220) +#define CG_PLL1_CTRL1 (0x224) +#define CG_PWRUP_STATUS (0x234) + +#define MPIC_CSR(n) (0x30C + (n * 0x40)) + +#define SD_CTRL (0x000) +#define SD_STATUS (0x004) +#define SD_TIMING (0x008) +#define SD_REFRESH (0x00C) +#define SD_INT_STATUS (0x010) +#define SD_INT_ENABLE (0x014) +#define SD_INT_SET (0x018) +#define SD_D0_CTRL (0x020) +#define SD_D1_CTRL (0x024) +#define SD_D0_BAR (0x028) +#define SD_D1_BAR (0x02C) +#define SD_ECC_CTRL (0x040) +#define SD_DLL_STATUS (0x250) + +#define TS_SD_CTRL_ENABLE (1 << 31) + +#define PB_ERRCS_ES (1 << 1) +#define PB_ISR_PBS_RD_ERR (1 << 8) +#define PCI_IRP_STAT_P_CSR (1 << 23) + +/* + * I2C : Register address offset definitions + */ +#define I2C_CNTRL1 (0x00000000) +#define I2C_CNTRL2 (0x00000004) +#define I2C_RD_DATA (0x00000008) +#define I2C_TX_DATA (0x0000000c) + +/* + * I2C : Register Bit Masks and Reset Values + * definitions for every register + */ + +/* I2C_CNTRL1 : Reset Value */ +#define I2C_CNTRL1_RESET_VALUE (0x0000000a) + +/* I2C_CNTRL1 : Register Bits Masks Definitions */ +#define I2C_CNTRL1_DEVCODE (0x0000000f) +#define I2C_CNTRL1_PAGE (0x00000700) +#define I2C_CNTRL1_BYTADDR (0x00ff0000) +#define I2C_CNTRL1_I2CWRITE (0x01000000) + +/* I2C_CNTRL1 : Read/Write Bit Mask Definition */ +#define I2C_CNTRL1_RWMASK (0x01ff070f) + +/* I2C_CNTRL1 : Unused/Reserved bits Definition */ +#define I2C_CNTRL1_RESERVED (0xfe00f8f0) + +/* I2C_CNTRL2 : Reset Value */ +#define I2C_CNTRL2_RESET_VALUE (0x00000000) + +/* I2C_CNTRL2 : Register Bits Masks Definitions */ +#define I2C_CNTRL2_SIZE (0x00000003) +#define I2C_CNTRL2_LANE (0x0000000c) +#define I2C_CNTRL2_MULTIBYTE (0x00000010) +#define I2C_CNTRL2_START (0x00000100) +#define I2C_CNTRL2_WR_STATUS (0x00010000) +#define I2C_CNTRL2_RD_STATUS (0x00020000) +#define I2C_CNTRL2_I2C_TO_ERR (0x04000000) +#define I2C_CNTRL2_I2C_CFGERR (0x08000000) +#define I2C_CNTRL2_I2C_CMPLT (0x10000000) + +/* I2C_CNTRL2 : Read/Write Bit Mask Definition */ +#define I2C_CNTRL2_RWMASK (0x0000011f) + +/* I2C_CNTRL2 : Unused/Reserved bits Definition */ +#define I2C_CNTRL2_RESERVED (0xe3fcfee0) + +/* I2C_RD_DATA : Reset Value */ +#define I2C_RD_DATA_RESET_VALUE (0x00000000) + +/* I2C_RD_DATA : Register Bits Masks Definitions */ +#define I2C_RD_DATA_RBYTE0 (0x000000ff) +#define I2C_RD_DATA_RBYTE1 (0x0000ff00) +#define I2C_RD_DATA_RBYTE2 (0x00ff0000) +#define I2C_RD_DATA_RBYTE3 (0xff000000) + +/* I2C_RD_DATA : Read/Write Bit Mask Definition */ +#define I2C_RD_DATA_RWMASK (0x00000000) + +/* I2C_RD_DATA : Unused/Reserved bits Definition */ +#define I2C_RD_DATA_RESERVED (0x00000000) + +/* I2C_TX_DATA : Reset Value */ +#define I2C_TX_DATA_RESET_VALUE (0x00000000) + +/* I2C_TX_DATA : Register Bits Masks Definitions */ +#define I2C_TX_DATA_TBYTE0 (0x000000ff) +#define I2C_TX_DATA_TBYTE1 (0x0000ff00) +#define I2C_TX_DATA_TBYTE2 (0x00ff0000) +#define I2C_TX_DATA_TBYTE3 (0xff000000) + +/* I2C_TX_DATA : Read/Write Bit Mask Definition */ +#define I2C_TX_DATA_RWMASK (0xffffffff) + +/* I2C_TX_DATA : Unused/Reserved bits Definition */ +#define I2C_TX_DATA_RESERVED (0x00000000) + +#define TSI108_I2C_OFFSET 0x7000 /* offset for general use I2C channel */ +#define TSI108_I2C_SDRAM_OFFSET 0x4400 /* offset for SPD I2C channel */ + +#define I2C_EEPROM_DEVCODE 0xA /* standard I2C EEPROM device code */ + +/* I2C status codes */ + +#define TSI108_I2C_SUCCESS 0 +#define TSI108_I2C_PARAM_ERR 1 +#define TSI108_I2C_TIMEOUT_ERR 2 +#define TSI108_I2C_IF_BUSY 3 +#define TSI108_I2C_IF_ERROR 4 + +#endif /* _TSI108_H_ */ |