diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/mipi_dsi.h | 466 |
1 files changed, 466 insertions, 0 deletions
diff --git a/include/mipi_dsi.h b/include/mipi_dsi.h new file mode 100644 index 0000000000..f4a63b47f3 --- /dev/null +++ b/include/mipi_dsi.h @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved + * Author(s): Andrzej Hajda <a.hajda@samsung.com> + * Yannick Fertre <yannick.fertre@st.com> + * Philippe Cornu <philippe.cornu@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef MIPI_DSI_H +#define MIPI_DSI_H + +#include <mipi_display.h> + +struct mipi_dsi_host; +struct mipi_dsi_device; + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; + u8 type; + u16 flags; + + size_t tx_len; + const void *tx_buf; + + size_t rx_len; + void *rx_buf; +}; + +bool mipi_dsi_packet_format_is_short(u8 type); +bool mipi_dsi_packet_format_is_long(u8 type); + +/** + * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format + * @size: size (in bytes) of the packet + * @header: the four bytes that make up the header (Data ID, Word Count or + * Packet Data, and ECC) + * @payload_length: number of bytes in the payload + * @payload: a pointer to a buffer containing the payload, if any + */ +struct mipi_dsi_packet { + size_t size; + u8 header[4]; + size_t payload_length; + const u8 *payload; +}; + +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg); + +/** + * struct mipi_dsi_host_ops - DSI bus operations + * @attach: attach DSI device to DSI host + * @detach: detach DSI device from DSI host + * @transfer: transmit a DSI packet + * + * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg + * structures. This structure contains information about the type of packet + * being transmitted as well as the transmit and receive buffers. When an + * error is encountered during transmission, this function will return a + * negative error code. On success it shall return the number of bytes + * transmitted for write packets or the number of bytes received for read + * packets. + * + * Note that typically DSI packet transmission is atomic, so the .transfer() + * function will seldomly return anything other than the number of bytes + * contained in the transmit buffer on success. + */ +struct mipi_dsi_host_ops { + int (*attach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + int (*detach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + ssize_t (*transfer)(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg); +}; + +/** + * struct mipi_dsi_phy_ops - DSI host physical operations + * @init: initialized host physical part + * @get_lane_mbps: get lane bitrate per lane (mbps) + * @post_set_mode: operation that should after set mode + */ +struct mipi_dsi_phy_ops { + int (*init)(void *priv_data); + int (*get_lane_mbps)(void *priv_data, struct display_timing *timings, + u32 lanes, u32 format, unsigned int *lane_mbps); + void (*post_set_mode)(void *priv_data, unsigned long mode_flags); +}; + +/** + * struct mipi_dsi_host - DSI host device + * @dev: driver model device node for this DSI host + * @ops: DSI host operations + * @list: list management + */ +struct mipi_dsi_host { + struct device *dev; + const struct mipi_dsi_host_ops *ops; + struct list_head list; +}; + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +#define DSI_DEV_NAME_SIZE 20 + +/** + * struct mipi_dsi_device_info - template for creating a mipi_dsi_device + * @type: DSI peripheral chip type + * @channel: DSI virtual channel assigned to peripheral + * @node: pointer to OF device node or NULL + * + * This is populated and passed to mipi_dsi_device_new to create a new + * DSI device + */ +struct mipi_dsi_device_info { + char type[DSI_DEV_NAME_SIZE]; + u32 channel; + struct device_node *node; +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @name: DSI peripheral chip type + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + */ +struct mipi_dsi_device { + struct mipi_dsi_host *host; + struct udevice *dev; + + char name[DSI_DEV_NAME_SIZE]; + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; +}; + +/** + * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any + * given pixel format defined by the MIPI DSI + * specification + * @fmt: MIPI DSI pixel format + * + * Returns: The number of bits per pixel of the given pixel format. + */ +static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + case MIPI_DSI_FMT_RGB666: + return 24; + + case MIPI_DSI_FMT_RGB666_PACKED: + return 18; + + case MIPI_DSI_FMT_RGB565: + return 16; + } + + return -EINVAL; +} + +/** + * struct mipi_dsi_panel_plat - DSI panel platform data + * @device: DSI peripheral device + */ +struct mipi_dsi_panel_plat { + struct mipi_dsi_device *device; +}; + +/** + * mipi_dsi_attach - attach a DSI device to its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_attach(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_detach - detach a DSI device from its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_detach(struct mipi_dsi_device *dsi); +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value); + +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size); +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size); + +/** + * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode + * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking + * information only + * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both + * V-Blanking and H-Blanking information + */ +enum mipi_dsi_dcs_tear_mode { + MIPI_DSI_DCS_TEAR_MODE_VBLANK, + MIPI_DSI_DCS_TEAR_MODE_VHBLANK, +}; + +#define MIPI_DSI_DCS_POWER_MODE_DISPLAY BIT(2) +#define MIPI_DSI_DCS_POWER_MODE_NORMAL BIT(3) +#define MIPI_DSI_DCS_POWER_MODE_SLEEP BIT(4) +#define MIPI_DSI_DCS_POWER_MODE_PARTIAL BIT(5) +#define MIPI_DSI_DCS_POWER_MODE_IDLE BIT(6) + +/** + * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @data: buffer containing data to be transmitted + * @len: size of transmission buffer + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len); + +/** + * mipi_dsi_dcs_write() - send DCS write command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer containing the command payload + * @len: command payload length + * + * This function will automatically choose the right data type depending on + * the command payload length. + + * code on failure. + */ +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len); + +/** + * mipi_dsi_dcs_read() - send DCS read request command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer in which to receive data + * @len: size of receive buffer + * + * Return: The number of bytes read or a negative error code on failure. + */ +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); + +/** + * mipi_dsi_dcs_nop() - send DCS nop packet + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_get_power_mode() - query the display module's current power + * mode + * @dsi: DSI peripheral device + * @mode: return location for the current power mode + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); + +/** + * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: return location for the pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); + +/** + * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the + * display module except interface communication + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display + * module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_display_on() - start displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_column_address() - define the column extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first column of frame memory + * @end: last column of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +/** + * mipi_dsi_dcs_set_page_address() - define the page extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first page of frame memory + * @end: last page of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); + +/** + * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect + * output signal on the TE signal line + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect + * output signal on the TE signal line. + * @dsi: DSI peripheral device + * @mode: the Tearing Effect Output Line mode + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode); + +/** + * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); + +/** + * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for + * the Tearing Effect output signal of the display module + * @dsi: DSI peripheral device + * @scanline: scanline to use as trigger + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); + +/** + * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the + * display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness); + +/** + * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value + * of the display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness); + +#endif /* MIPI_DSI_H */ |