diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/lp8x4x.h | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h deleted file mode 100644 index 10a7b05daf..0000000000 --- a/include/configs/lp8x4x.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * ICP DAS LP-8x4x configuration file - * - * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */ -#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */ -#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "bootm 80000 - 240000;" - -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \ - "init=/sbin/init rootfstype=ext4 rootwait" - -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#undef CONFIG_LCD -#undef CONFIG_CMD_IDE - -/* - * Networking Configuration - * chip on the ICPDAS LINPAC board - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x0C000000 -#define DM9000_IO 0x0C000000 -#define DM9000_DATA 0x0C004000 -#define DM9000_IO_2 0x0D000000 -#define DM9000_DATA_2 0x0D004000 -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#endif - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE 1 - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0008000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -/* Use first 64kb bank of the internal SRAM */ -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 - -/* - * NOR FLASH - */ -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x0808c014 -#define CONFIG_SYS_GPSR1_VAL 0x00cf0002 -#define CONFIG_SYS_GPSR2_VAL 0x0221c000 -#define CONFIG_SYS_GPSR3_VAL 0x00020000 - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x0000ab80 -#define CONFIG_SYS_GPCR2_VAL 0x00100000 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 -#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff -#define CONFIG_SYS_GPDR3_VAL 0x00021b81 - -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018 -#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x55f9a402 -#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c -#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 - -#define CONFIG_SYS_PSSR_VAL 0x32 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x005002c0 -#define CONFIG_SYS_CCCR 0x02000290 -#define CONFIG_SYS_CLKCFG 0x0000000b - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2 -#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc -#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_MDREFR_VAL 0x2093e018 -#define CONFIG_SYS_MDCNFG_VAL 0x890009d1 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x0000c497 -#define CONFIG_SYS_MCMEM1_VAL 0x0000c497 -#define CONFIG_SYS_MCATT0_VAL 0x0000c497 -#define CONFIG_SYS_MCATT1_VAL 0x0000c497 -#define CONFIG_SYS_MCIO0_VAL 0x00008407 -#define CONFIG_SYS_MCIO1_VAL 0x00008407 - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x" -#define CONFIG_USB_STORAGE -#endif - -#endif /* __CONFIG_H */ |