diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/MPC8610HPCD.h | 19 |
1 files changed, 14 insertions, 5 deletions
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 9fa42f32da..00c94ef47d 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -21,6 +21,7 @@ #define CONFIG_NUM_CPUS 1 /* Number of CPUs in the system */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #ifdef RUN_DIAG #define CFG_DIAG_ADDR 0xff800000 #endif @@ -38,7 +39,7 @@ #define CONFIG_SPD_EEPROM /* Use SPD for DDR */ #undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ -#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_NUM_DDR_CONTROLLERS 1 @@ -51,13 +52,14 @@ */ #define CFG_L2 #define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) +#define L2_ENABLE (L2CR_L2E |0x00100000 ) #ifndef CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_R 1 #undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ @@ -159,6 +161,7 @@ #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch */ #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ +#define PIXIS_BRDCFG0 0x8 /* PIXIS Board Configuration Register0*/ #define PIXIS_VCTL 0x10 /* VELA Control Register */ #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ @@ -208,7 +211,7 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -474,6 +477,9 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ +/*DIU Configuration*/ +#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/ + /* * Miscellaneous configurable options */ @@ -621,7 +627,8 @@ "diuregs=md e002c000 1d\0" \ "dium=mw e002c01c\0" \ "diuerr=md e002c014 1\0" \ - "othbootargs=debug\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \ + "monitor=0-DVI\0" \ "pmregs=md e00e1000 2b\0" \ "lawregs=md e0000c08 4b\0" \ "lbcregs=md e0005000 36\0" \ @@ -641,7 +648,9 @@ "ramdiskfile=8610hpcd/ramdisk.uboot\0" \ "dtbaddr=c00000\0" \ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \ - "bdev=sda3\0" + "bdev=sda3\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\ + "monitor=0-DVI\0" #endif #define CONFIG_NFSBOOTCOMMAND \ |