diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/MPC8536DS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8540ADS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8541CDS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8544DS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8548CDS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8555CDS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8560ADS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8568MDS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8569MDS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8572DS.h | 6 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 2 | ||||
| -rw-r--r-- | include/configs/P1022DS.h | 21 | ||||
| -rw-r--r-- | include/configs/P1_P2_RDB.h | 31 | ||||
| -rw-r--r-- | include/configs/P2020DS.h | 34 | ||||
| -rw-r--r-- | include/configs/P3041DS.h | 37 | ||||
| -rw-r--r-- | include/configs/P5020DS.h | 37 | ||||
| -rw-r--r-- | include/configs/corenet_ds.h | 46 | ||||
| -rw-r--r-- | include/spi.h | 7 | ||||
| -rw-r--r-- | include/tsec.h | 2 |
19 files changed, 221 insertions, 56 deletions
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9b3e032924..7f7ff9f4e1 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -721,11 +721,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 8b3aff8e06..e1d933ec49 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -420,11 +420,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 7101230e54..5918e644d1 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -432,11 +432,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 62bac6d64f..b25fb55a46 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -452,11 +452,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 43e2c2eb17..0c0ae02890 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -491,11 +491,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 106034db42..4c580a37e3 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -430,11 +430,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 15ebb6f167..f55ef9d796 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -461,11 +461,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6237b23b7e..f7df7f0388 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -451,11 +451,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 8835ef5c91..fa626bb977 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -590,11 +590,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index d93185c8a2..bb8fb669c3 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -708,11 +708,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 0cca603ff7..0ddb76f868 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -90,8 +90,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index e9622e7c06..a118975528 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -170,6 +170,8 @@ #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xF0 #define PIXIS_LBMAP_ALTBANK 0x20 +#define PIXIS_ELBC_SPI_MASK 0xc0 +#define PIXIS_SPI 0x80 #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ @@ -269,6 +271,19 @@ #define CONFIG_SYS_EEPROM_BUS_NUM 1 /* + * eSPI - Enhanced SPI + */ +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION + +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -462,11 +477,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index cccf84d105..59f975546c 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -244,6 +244,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R #define CONFIG_HWCONFIG #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -410,6 +411,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_RTC_DS1337 #define CONFIG_SYS_RTC_DS1337_NOOSC #define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* eSPI - Enhanced SPI */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. @@ -521,9 +531,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#elif defined(CONFIG_RAMBOOT_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_RAMBOOT_SPIFLASH) + #define CONFIG_ENV_IS_IN_SPI_FLASH + #define CONFIG_ENV_SPI_BUS 0 + #define CONFIG_ENV_SPI_CS 0 + #define CONFIG_ENV_SPI_MAX_HZ 10000000 + #define CONFIG_ENV_SPI_MODE 0 + #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ + #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 #endif #else @@ -611,11 +630,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20)/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 47f1f18006..b5db0b3c24 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -40,6 +40,13 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc #endif +#ifdef CONFIG_SPIFLASH +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ @@ -418,6 +425,18 @@ #define CONFIG_SYS_EEPROM_BUS_NUM 0 /* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -594,6 +613,15 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH 1 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 @@ -681,11 +709,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h new file mode 100644 index 0000000000..46f91ccfc3 --- /dev/null +++ b/include/configs/P3041DS.h @@ -0,0 +1,37 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P3041 DS board configuration file + * + */ +#define CONFIG_P3041DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P3041 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" + diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h new file mode 100644 index 0000000000..6d279b393e --- /dev/null +++ b/include/configs/P5020DS.h @@ -0,0 +1,37 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P5020 DS board configuration file + * + */ +#define CONFIG_P5020DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P5020 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" + diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bec8cd1ce1..d1cda151d8 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -162,6 +162,7 @@ #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ /* @@ -218,6 +219,43 @@ #define CONFIG_SYS_RAMBOOT #endif +/* Nand Flash */ +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#define CONFIG_NAND_FSL_ELBC +#ifdef CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ +#endif /* CONFIG_NAND_FSL_ELBC */ +#endif + #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} @@ -356,7 +394,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull @@ -534,11 +572,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/spi.h b/include/spi.h index 7887d0f9b8..60e85db9a4 100644 --- a/include/spi.h +++ b/include/spi.h @@ -26,13 +26,6 @@ /* Controller-specific definitions: */ -/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ -#ifdef CONFIG_MPC8XXX_SPI -# ifndef CONFIG_HARD_SPI -# define CONFIG_HARD_SPI -# endif -#endif - /* SPI mode flags */ #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ diff --git a/include/tsec.h b/include/tsec.h index 8ed30aca09..f0f3d4d59b 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -25,7 +25,7 @@ #define TSEC_SIZE 0x01000 #define TSEC_MDIO_OFFSET 0x01000 -#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520) +#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520) #define DEFAULT_MII_NAME "FSL_MDIO" |