diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/T1040QDS.h | 5 | ||||
-rw-r--r-- | include/configs/T1040RDB.h | 24 | ||||
-rw-r--r-- | include/configs/T1042RDB_PI.h | 20 | ||||
-rw-r--r-- | include/configs/km/keymile-common.h | 10 | ||||
-rw-r--r-- | include/configs/km/kmp204x-common.h | 21 | ||||
-rw-r--r-- | include/configs/kmp204x.h | 7 | ||||
-rw-r--r-- | include/fsl_ifc.h | 42 |
7 files changed, 88 insertions, 41 deletions
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 8234a828dd..75ea125f53 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -611,9 +611,8 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 -#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 +#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 5e988c254c..7cfda50c8c 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -386,6 +383,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -543,13 +544,12 @@ #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -627,9 +627,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index aafa8139b1..ed9ca8a3e1 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -394,6 +391,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -551,8 +552,11 @@ #endif #ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -631,9 +635,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 2a15ad469b..a4e0f7cf68 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -99,11 +99,16 @@ #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS +#define CONFIG_KM_UBI_PART_BOOT_OPTS "" +#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */ + #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP /* one flash chip only called boot */ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ @@ -111,7 +116,8 @@ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ /* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS " " \ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=if test ${boot_bank} -eq 0; then; " \ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 2466649b15..b9e1bacfa7 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -15,6 +15,10 @@ #define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" +/* an additionnal option is required for UBI as subpage access is + * supported in u-boot */ +#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" + #define CONFIG_NAND_ECC_BCH /* common KM defines */ @@ -148,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ #define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ -#define CONFIG_BOOTCOUNT_LIMIT - /* * Local Bus Definitions */ @@ -206,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ +/* bootcounter in QRIO */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT @@ -263,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ /* I2C */ + #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ #define CONFIG_SYS_NUM_I2C_BUSES 3 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ @@ -276,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ } +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#endif #define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ @@ -286,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index 4158c8dd0f..8bb3571691 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -13,6 +13,11 @@ #define CONFIG_HOSTNAME kmlion1 #define CONFIG_KM_BOARD_NAME "kmlion1" +/* KMCOGE4 */ +#elif defined(CONFIG_KMCOGE4) +#define CONFIG_HOSTNAME kmcoge4 +#define CONFIG_KM_BOARD_NAME "kmcoge4" + #else #error ("Board not supported") #endif @@ -42,6 +47,7 @@ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM /* Local bus app1 Options */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM +#endif /* App2 Local bus */ #define CONFIG_SYS_LBAPP2_BASE 0xE0000000 @@ -63,6 +69,5 @@ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM /* Local bus app2 Options */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM -#endif #endif /* __CONFIG_H */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index be6c10715b..58a6efdfe0 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -12,6 +12,20 @@ #include <config.h> #include <common.h> + +#ifdef CONFIG_SYS_FSL_IFC_LE +#define ifc_in32(a) in_le32(a) +#define ifc_out32(a, v) out_le32(a, v) +#define ifc_in16(a) in_le16(a) +#elif defined(CONFIG_SYS_FSL_IFC_BE) +#define ifc_in32(a) in_be32(a) +#define ifc_out32(a, v) out_be32(a, v) +#define ifc_in16(a) in_be16(a) +#else +#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined +#endif + + /* * CSPR - Chip Select Property Register */ @@ -773,20 +787,22 @@ extern void init_early_memctl_regs(void); #define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) -#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) -#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) -#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) -#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) -#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) -#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) - -#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) -#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) -#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) -#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) -#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define get_ifc_cspr_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) +#define get_ifc_cspr(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) +#define get_ifc_csor(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (ifc_in32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (ifc_in32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) +#define set_ifc_cspr(i, v) (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) +#define set_ifc_csor(i, v) (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (ifc_out32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) #define set_ifc_ftim(i, j, v) \ - (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + (ifc_out32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) enum ifc_chip_sel { IFC_CS0, |