diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/db-88f6820-gp.h | 15 | ||||
| -rw-r--r-- | include/configs/db-mv784mp-gp.h | 24 | ||||
| -rw-r--r-- | include/configs/maxbcm.h | 7 |
3 files changed, 43 insertions, 3 deletions
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 739c2bf3d5..1dd4182136 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -20,7 +20,12 @@ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_TEXT_BASE 0x04000000 +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* @@ -36,6 +41,7 @@ #define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_I2C #define CONFIG_CMD_MMC +#define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SCSI #define CONFIG_CMD_SF @@ -101,6 +107,13 @@ #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ +/* PCIe support */ +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_E1000 /* enable Intel E1000 support for testing */ + #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 41e6fdcb52..eec2ba933f 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -17,7 +17,12 @@ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_TEXT_BASE 0x04000000 +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* @@ -28,11 +33,13 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE +#define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_TFTPPUT #define CONFIG_CMD_TIME +#define CONFIG_CMD_USB /* I2C */ #define CONFIG_SYS_I2C @@ -41,6 +48,13 @@ #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 +/* USB/EHCI configuration */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_MARVELL +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 + /* SPI NOR flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_SPEED 1000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 @@ -89,6 +103,13 @@ #define CONFIG_DOS_PARTITION #endif /* CONFIG_CMD_IDE */ +/* PCIe support */ +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_E1000 /* enable Intel E1000 support for testing */ + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -136,6 +157,7 @@ #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_MVEBU_DDR_AXP diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 0fb117f9d3..3530a26213 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -15,7 +15,12 @@ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_TEXT_BASE 0x04000000 +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* |