summaryrefslogtreecommitdiff
path: root/post
diff options
context:
space:
mode:
Diffstat (limited to 'post')
-rw-r--r--post/Makefile4
-rw-r--r--post/board/lwmon5/Makefile8
-rw-r--r--post/board/lwmon5/dsp.c54
-rw-r--r--post/board/lwmon5/dspic.c105
-rw-r--r--post/board/lwmon5/fpga.c344
-rw-r--r--post/board/lwmon5/gdc.c363
-rw-r--r--post/board/lwmon5/sysmon.c277
-rw-r--r--post/board/lwmon5/watchdog.c121
-rw-r--r--post/cpu/ppc4xx/Makefile16
-rw-r--r--post/cpu/ppc4xx/cache.c106
-rw-r--r--post/cpu/ppc4xx/cache_4xx.S473
-rw-r--r--post/cpu/ppc4xx/denali_ecc.c261
-rw-r--r--post/cpu/ppc4xx/ether.c419
-rw-r--r--post/cpu/ppc4xx/fpu.c41
-rw-r--r--post/cpu/ppc4xx/ocm.c73
-rw-r--r--post/cpu/ppc4xx/spr.c184
-rw-r--r--post/cpu/ppc4xx/uart.c92
-rw-r--r--post/cpu/ppc4xx/watchdog.c52
-rw-r--r--post/lib_powerpc/cpu.c8
19 files changed, 0 insertions, 3001 deletions
diff --git a/post/Makefile b/post/Makefile
index 09bf408f4c..33db359b42 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -11,7 +11,3 @@ obj-$(CONFIG_POST_STD_LIST) += tests.o
obj-y += drivers/
obj-$(CONFIG_PPC) += lib_powerpc/
obj-$(CONFIG_MPC83xx) += cpu/mpc83xx/
-obj-$(CONFIG_4xx) += cpu/ppc4xx/
-ifneq ($(filter lwmon5 pdm360ng,$(BOARD)),)
-obj-y += board/$(BOARD)/
-endif
diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile
deleted file mode 100644
index 76262c76bc..0000000000
--- a/post/board/lwmon5/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
-#
-# Developed for DENX Software Engineering GmbH
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c
deleted file mode 100644
index 2f55f01ceb..0000000000
--- a/post/board/lwmon5/dsp.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_DSP
-#include <asm/io.h>
-
-/* This test verifies DSP status bits in FPGA */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define DSP_STATUS_REG 0xC4000008
-#define FPGA_STATUS_REG 0xC400000C
-
-int dsp_post_test(int flags)
-{
- uint old_value;
- uint read_value;
- int ret;
-
- /* momorize fpga status */
- old_value = in_be32((void *)FPGA_STATUS_REG);
- /* enable outputs */
- out_be32((void *)FPGA_STATUS_REG, 0x30);
-
- /* generate sync signal */
- out_be32((void *)DSP_STATUS_REG, 0x300);
- udelay(5);
- out_be32((void *)DSP_STATUS_REG, 0);
- udelay(500);
-
- /* read status */
- ret = 0;
- read_value = in_be32((void *)DSP_STATUS_REG) & 0x3;
- if (read_value != 0x03) {
- post_log("\nDSP status read %08X\n", read_value);
- ret = 1;
- }
-
- /* restore fpga status */
- out_be32((void *)FPGA_STATUS_REG, old_value);
-
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */
diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c
deleted file mode 100644
index c5ed190227..0000000000
--- a/post/board/lwmon5/dspic.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/* There are two tests for dsPIC currently implemented:
- * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here.
- * 2. dsPIC POST result test. This test gets dsPIC POST codes and version.
- */
-
-#include <post.h>
-
-#include <i2c.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define DSPIC_POST_ERROR_REG 0x800
-#define DSPIC_SYS_ERROR_REG 0x802
-#define DSPIC_SYS_VERSION_REG 0x804
-#define DSPIC_FW_VERSION_REG 0x808
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
-
-/* Verify that dsPIC ready test done early at hw init passed ok */
-int dspic_init_post_test(int flags)
-{
- if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) &
- CONFIG_SYS_DSPIC_TEST_MASK) {
- post_log("dsPIC init test failed\n");
- return 1;
- }
-
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC1 */
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
-/* Read a register from the dsPIC. */
-int dspic_read(ushort reg, ushort *data)
-{
- uchar buf[sizeof(*data)];
- int rval;
-
- if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
- return -1;
- rval = i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, sizeof(reg),
- buf, sizeof(*data));
- *data = (buf[0] << 8) | buf[1];
-
- return rval;
-}
-
-/* Verify error codes regs, display version */
-int dspic_post_test(int flags)
-{
- ushort data;
- int ret = 0;
-
- post_log("\n");
-
- /* read dspic FW-Version */
- if (dspic_read(DSPIC_FW_VERSION_REG, &data)) {
- post_log("dsPIC: failed read FW-Version\n");
- ret = 1;
- } else {
- post_log("dsPIC FW-Version: %u.%u\n",
- (data >> 8) & 0xFF, data & 0xFF);
- }
-
- /* read dspic SYS-Version */
- if (dspic_read(DSPIC_SYS_VERSION_REG, &data)) {
- post_log("dsPIC: failed read version\n");
- ret = 1;
- } else {
- post_log("dsPIC SYS-Version: %u.%u\n",
- (data >> 8) & 0xFF, data & 0xFF);
- }
-
- /* read dspic POST error code */
- if (dspic_read(DSPIC_POST_ERROR_REG, &data)) {
- post_log("dsPIC: failed read POST code\n");
- ret = 1;
- } else {
- post_log("dsPIC POST-ERROR code: 0x%04X\n", data);
- }
-
- /* read dspic SYS error code */
- if ((data = dspic_read(DSPIC_SYS_ERROR_REG, &data))) {
- post_log("dsPIC: failed read system error\n");
- ret = 1;
- } else {
- post_log("dsPIC SYS-ERROR code: 0x%04X\n", data);
- }
-
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC2 */
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
deleted file mode 100644
index 1a72823968..0000000000
--- a/post/board/lwmon5/fpga.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-/* This test performs testing of FPGA SCRATCH register,
- * gets FPGA version and run get_ram_size() on FPGA memory
- */
-
-#include <post.h>
-#include <watchdog.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FPGA_SCRATCH_REG 0xC4000050
-#define FPGA_VERSION_REG 0xC4000040
-#define FPGA_RAM_START 0xC4200000
-#define FPGA_RAM_END 0xC4203FFF
-#define FPGA_STAT 0xC400000C
-#define FPGA_BUFFER 0x00800000
-#define FPGA_RAM_SIZE (FPGA_RAM_END - FPGA_RAM_START + 1)
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
-
-const static unsigned long pattern[] = {
- 0xffffffff,
- 0xaaaaaaaa,
- 0xcccccccc,
- 0xf0f0f0f0,
- 0xff00ff00,
- 0xffff0000,
- 0x0000ffff,
- 0x00ff00ff,
- 0x0f0f0f0f,
- 0x33333333,
- 0x55555555,
- 0x00000000,
-};
-
-const static unsigned long otherpattern = 0x01234567;
-
-static int one_scratch_test(uint value)
-{
- uint read_value;
- int ret = 0;
-
- out_be32((void *)FPGA_SCRATCH_REG, value);
- /* read other location (protect against data lines capacity) */
- ret = in_be16((void *)FPGA_VERSION_REG);
- /* verify test pattern */
- read_value = in_be32((void *)FPGA_SCRATCH_REG);
- if (read_value != value) {
- post_log("FPGA SCRATCH test failed write %08X, read %08X\n",
- value, read_value);
- ret = -1;
- }
-
- return ret;
-}
-
-static int fpga_post_test1(ulong *start, ulong size, ulong val)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = val;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != val) {
- post_log("FPGA Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, val, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
- return ret;
-}
-
-static int fpga_post_test2(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = 1 << (i % 32);
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != 1 << (i % 32)) {
- post_log("FPGA Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, 1 << (i % 32), readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-static int fpga_post_test3(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = i;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != i) {
- post_log("FPGA Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, i, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-static int fpga_post_test4(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = ~i;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != ~i) {
- post_log("FPGA Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, ~i, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-/* FPGA Memory-pattern-test */
-static int fpga_mem_test(void)
-{
- int ret = 0;
- ulong* start = (ulong *)FPGA_RAM_START;
- ulong size = FPGA_RAM_SIZE;
-
- if (ret == 0)
- ret = fpga_post_test1(start, size, 0x00000000);
-
- if (ret == 0)
- ret = fpga_post_test1(start, size, 0xffffffff);
-
- if (ret == 0)
- ret = fpga_post_test1(start, size, 0x55555555);
-
- if (ret == 0)
- ret = fpga_post_test1(start, size, 0xaaaaaaaa);
-
- WATCHDOG_RESET();
-
- if (ret == 0)
- ret = fpga_post_test2(start, size);
-
- if (ret == 0)
- ret = fpga_post_test3(start, size);
-
- if (ret == 0)
- ret = fpga_post_test4(start, size);
-
- return ret;
-}
-
-/* Verify FPGA addresslines */
-static int fpga_post_addrline(ulong *address, ulong *base, ulong size)
-{
- unsigned long *target;
- unsigned long *end;
- unsigned long readback;
- unsigned long xor;
- int ret = 0;
-
- end = (ulong *)((ulong)base + size);
- xor = 0;
-
- for (xor = sizeof(ulong); xor > 0; xor <<= 1) {
- target = (ulong*)((ulong)address ^ xor);
- if ((target >= base) && (target < end)) {
- *address = ~*target;
- readback = *target;
-
- if (readback == *address) {
- post_log("Memory (address line) error at %08x"
- "XOR value %08x !\n",
- address, target, xor);
- ret = -1;
- break;
- }
- }
- }
-
- return ret;
-}
-
-/* Verify FPGA addresslines */
-static int fpga_post_dataline(ulong *address)
-{
- unsigned long temp32 = 0;
- int i = 0;
- int ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(pattern); i++) {
- *address = pattern[i];
- /*
- * Put a different pattern on the data lines: otherwise they
- * may float long enough to read back what we wrote.
- */
- *(address + 1) = otherpattern;
- temp32 = *address;
-
- if (temp32 != pattern[i]){
- post_log("Memory (date line) error at %08x, "
- "wrote %08x, read %08x !\n",
- address, pattern[i], temp32);
- ret = 1;
- }
- }
-
- return ret;
-}
-
-/* Verify FPGA, get version & memory size */
-int fpga_post_test(int flags)
-{
- uint old_value;
- uint version;
- uint read_value;
- int ret = 0;
-
- post_log("\n");
- old_value = in_be32((void *)FPGA_SCRATCH_REG);
-
- if (one_scratch_test(0x55555555))
- ret = 1;
- if (one_scratch_test(0xAAAAAAAA))
- ret = 1;
-
- out_be32((void *)FPGA_SCRATCH_REG, old_value);
-
- version = in_be32((void *)FPGA_VERSION_REG);
- post_log("FPGA version %u.%u\n",
- (version >> 8) & 0xFF, version & 0xFF);
-
- /* Enable write to FPGA RAM */
- out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000);
-
- /* get RAM size */
- read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, FPGA_RAM_SIZE);
- post_log("FPGA RAM size %d bytes\n", read_value);
- WATCHDOG_RESET();
-
- /* copy fpga memory to DDR2 RAM*/
- memcpy((void *)FPGA_BUFFER,(void *)FPGA_RAM_START, FPGA_RAM_SIZE);
- WATCHDOG_RESET();
-
- /* Test datalines */
- if (fpga_post_dataline((ulong *)FPGA_RAM_START)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
-
- /* Test addresslines */
- if (fpga_post_addrline((ulong *)FPGA_RAM_START,
- (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
- if (fpga_post_addrline((ulong *)FPGA_RAM_END - sizeof(long),
- (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
-
- /* Memory Pattern Test */
- if (fpga_mem_test()) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
-
- /* restore memory */
- memcpy((void *)FPGA_RAM_START,(void *)FPGA_BUFFER, FPGA_RAM_SIZE);
- WATCHDOG_RESET();
-
-out:
- /* Disable write to RAM */
- out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) & 0xEFFF);
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC3 */
diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c
deleted file mode 100644
index 9405e7d9ab..0000000000
--- a/post/board/lwmon5/gdc.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-/* This test attempts to verify board GDC. A scratch register tested, then
- * simple memory test (get_ram_size()) run over GDC memory.
- */
-
-#include <post.h>
-#include <watchdog.h>
-#include <asm/io.h>
-#include <video.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GDC_SCRATCH_REG 0xC1FF8044
-#define GDC_VERSION_REG 0xC1FF8084
-#define GDC_HOST_BASE 0xC1FC0000
-#define GDC_RAM_START 0xC0000000
-#define GDC_RAM_END (GDC_HOST_BASE - 1)
-#define GDC_RAM_SIZE (GDC_RAM_END - GDC_RAM_START)
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
-
-const static unsigned long pattern[] = {
- 0xffffffff,
- 0xaaaaaaaa,
- 0xcccccccc,
- 0xf0f0f0f0,
- 0xff00ff00,
- 0xffff0000,
- 0x0000ffff,
- 0x00ff00ff,
- 0x0f0f0f0f,
- 0x33333333,
- 0x55555555,
- 0x00000000
-};
-
-const static unsigned long otherpattern = 0x01234567;
-
-/* test write/read og a given LIME Register */
-static int gdc_test_reg_one(uint value)
-{
- uint read_value;
-
- /* write test pattern */
- out_be32((void *)GDC_SCRATCH_REG, value);
- /* read other location (protect against data lines capacity) */
- in_be32((void *)GDC_RAM_START);
- /* verify test pattern */
- read_value = in_be32((void *)GDC_SCRATCH_REG);
- if (read_value != value) {
- post_log("GDC SCRATCH test failed write %08X, read %08X\n",
- value, read_value);
- }
-
- return (read_value != value);
-}
-
-/* test with a given static 32 bit pattern in a given memory addressrange */
-static int gdc_post_test1(ulong *start, ulong size, ulong val)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = val;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != val) {
- post_log("GDC Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, val, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-/* test with dynamic 32 bit pattern in a given memory addressrange */
-static int gdc_post_test2(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = 1 << (i % 32);
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != 1 << (i % 32)) {
- post_log("GDC Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, 1 << (i % 32), readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-/* test with dynamic 32 bit pattern in a given memory addressrange */
-static int gdc_post_test3(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = i;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != i) {
- post_log("GDC Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, i, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-/* test with dynamic 32 bit pattern in a given memory addressrange */
-static int gdc_post_test4(ulong *start, ulong size)
-{
- int ret = 0;
- ulong i = 0;
- ulong *mem = start;
- ulong readback;
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- mem[i] = ~i;
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- for (i = 0; i < size / sizeof(ulong); i++) {
- readback = mem[i];
- if (readback != ~i) {
- post_log("GDC Memory error at %08x, "
- "wrote %08x, read %08x !\n",
- mem + i, ~i, readback);
- ret = -1;
- break;
- }
- if (i % 1024 == 0)
- WATCHDOG_RESET();
- }
-
- return ret;
-}
-
-/* do some patterntests in a given addressrange */
-int gdc_mem_test(ulong *start, ulong size)
-{
- int ret = 0;
-
- /*
- * check addressrange and do different static and dynamic
- * pattern tests with it.
- */
- if (((void *)start) + size <= (void *)GDC_RAM_END) {
- if (ret == 0)
- ret = gdc_post_test1(start, size, 0x00000000);
-
- if (ret == 0)
- ret = gdc_post_test1(start, size, 0xffffffff);
-
- if (ret == 0)
- ret = gdc_post_test1(start, size, 0x55555555);
-
- if (ret == 0)
- ret = gdc_post_test1(start, size, 0xaaaaaaaa);
-
- if (ret == 0)
- ret = gdc_post_test2(start, size);
-
- if (ret == 0)
- ret = gdc_post_test3(start, size);
-
- if (ret == 0)
- ret = gdc_post_test4(start, size);
- }
-
- return ret;
-}
-
-/* test function of gdc memory addresslines*/
-static int gdc_post_addrline(ulong *address, ulong *base, ulong size)
-{
- ulong *target;
- ulong *end;
- ulong readback = 0;
- ulong xor = 0;
- int ret = 0;
-
- end = (ulong *)((ulong)base + size);
-
- for (xor = sizeof(long); xor > 0; xor <<= 1) {
- target = (ulong *)((ulong)address ^ xor);
- if ((target >= base) && (target < end)) {
- *address = ~*target;
- readback = *target;
- }
-
- if (readback == *address) {
- post_log("GDC Memory (address line) error at %08x"
- "XOR value %08x !\n",
- address, target , xor);
- ret = -1;
- break;
- }
- }
-
- return ret;
-}
-
-static int gdc_post_dataline(ulong *address)
-{
- unsigned long temp32 = 0;
- int i = 0;
- int ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(pattern); i++) {
- *address = pattern[i];
- /*
- * Put a different pattern on the data lines: otherwise they
- * may float long enough to read back what we wrote.
- */
- *(address + 1) = otherpattern;
- temp32 = *address;
-
- if (temp32 != pattern[i]){
- post_log("GDC Memory (date line) error at %08x, "
- "wrote %08x, read %08x !\n",
- address, pattern[i], temp32);
- ret = 1;
- }
- }
-
- return ret;
-}
-
-/* Verify GDC, get memory size, verify GDC memory */
-int gdc_post_test(int flags)
-{
- uint old_value;
- int i = 0;
- int ret = 0;
-
- post_log("\n");
- old_value = in_be32((void *)GDC_SCRATCH_REG);
-
- /*
- * GPIOC2 register behaviour: the LIME graphics processor has a
- * maximum of 5 GPIO ports that can be used in this hardware
- * configuration. Thus only the bits for these 5 GPIOs can be
- * activated in the GPIOC2 register. All other bits will always be
- * read as zero.
- */
- if (gdc_test_reg_one(0x00150015))
- ret = 1;
- if (gdc_test_reg_one(0x000A000A))
- ret = 1;
-
- out_be32((void *)GDC_SCRATCH_REG, old_value);
-
- old_value = in_be32((void *)GDC_VERSION_REG);
- post_log("GDC chip version %u.%u, year %04X\n",
- (old_value >> 8) & 0xFF, old_value & 0xFF,
- (old_value >> 16) & 0xFFFF);
-
- old_value = get_ram_size((void *)GDC_RAM_START,
- 0x02000000);
-
- debug("GDC RAM size (ist): %d bytes\n", old_value);
- debug("GDC RAM size (soll): %d bytes\n", GDC_RAM_SIZE);
- post_log("GDC RAM size: %d bytes\n", old_value);
-
- /* Test SDRAM datalines */
- if (gdc_post_dataline((ulong *)GDC_RAM_START)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
-
- /* Test SDRAM adresslines */
- if (gdc_post_addrline((ulong *)GDC_RAM_START,
- (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
- if (gdc_post_addrline((ulong *)GDC_RAM_END - sizeof(long),
- (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
- ret = 1;
- goto out;
- }
- WATCHDOG_RESET();
-
- /* memory pattern test */
- debug("GDC Memory test (flags %8x:%8x)\n", flags,
- POST_SLOWTEST | POST_MANUAL);
-
- if (flags & POST_MANUAL) {
- debug("Full memory test\n");
- if (gdc_mem_test((ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
- ret = 1;
- goto out;
- }
- /* load splashscreen again */
- } else {
- debug("smart memory test\n");
- for (i = 0; i < (GDC_RAM_SIZE >> 20) && ret == 0; i++) {
- if (ret == 0)
- ret = gdc_mem_test((ulong *)(GDC_RAM_START +
- (i << 20)),
- 0x800);
- if (ret == 0)
- ret = gdc_mem_test((ulong *)(GDC_RAM_START +
- (i << 20) + 0xff800),
- 0x800);
- }
- }
- WATCHDOG_RESET();
-
-out:
- return ret;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */
diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c
deleted file mode 100644
index cca1a26235..0000000000
--- a/post/board/lwmon5/sysmon.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <post.h>
-#include <common.h>
-
-/*
- * SYSMON test
- *
- * This test performs the system hardware monitoring.
- * The test passes when all the following voltages and temperatures
- * are within allowed ranges:
- *
- * Temperature -40 .. +90 C
- * +5V +4.50 .. +5.50 V
- * +5V standby +3.50 .. +5.50 V
- *
- * LCD backlight is not enabled if temperature values are not within
- * allowed ranges (-30 .. + 80). The brightness of backlite can be
- * controlled by setting "brightness" environment variable. Default value is 50%
- *
- * See the list of all parameters in the sysmon_table below
- */
-
-#include <post.h>
-#include <watchdog.h>
-#include <i2c.h>
-
-#if defined(CONFIG_VIDEO)
-#include <mb862xx.h>
-#endif
-
-#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* from dspic.c */
-extern int dspic_read(ushort reg, ushort *data);
-
-#define REG_TEMPERATURE 0x12BC
-#define REG_VOLTAGE_5V 0x12CA
-#define REG_VOLTAGE_5V_STANDBY 0x12C6
-
-#define TEMPERATURE_MIN (-40) /* degr. C */
-#define TEMPERATURE_MAX (+90) /* degr. C */
-#define TEMPERATURE_DISPLAY_MIN (-35) /* degr. C */
-#define TEMPERATURE_DISPLAY_MAX (+85) /* degr. C */
-
-#define VOLTAGE_5V_MIN (+4500) /* mV */
-#define VOLTAGE_5V_MAX (+5500) /* mV */
-
-#define VOLTAGE_5V_STANDBY_MIN (+3500) /* mV */
-#define VOLTAGE_5V_STANDBY_MAX (+5500) /* mV */
-
-typedef struct sysmon_s sysmon_t;
-typedef struct sysmon_table_s sysmon_table_t;
-
-static void sysmon_dspic_init(sysmon_t *this);
-static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val);
-static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val);
-static void sysmon_backlight_disable(sysmon_table_t *this);
-
-struct sysmon_s {
- uchar chip;
- void (*init)(sysmon_t *);
- int (*read)(sysmon_t *, uint, int *);
-};
-
-static sysmon_t sysmon_dspic = {
- CONFIG_SYS_I2C_DSPIC_IO_ADDR,
- sysmon_dspic_init,
- sysmon_dspic_read
-};
-
-static sysmon_t sysmon_dspic_sgn = {
- CONFIG_SYS_I2C_DSPIC_IO_ADDR,
- sysmon_dspic_init,
- sysmon_dspic_read_sgn
-};
-
-static sysmon_t *sysmon_list[] = {
- &sysmon_dspic,
- NULL
-};
-
-struct sysmon_table_s {
- char *name;
- char *unit_name;
- sysmon_t *sysmon;
- void (*exec_before)(sysmon_table_t *);
- void (*exec_after)(sysmon_table_t *);
-
- int unit_precision;
- int unit_div;
- int unit_min;
- int unit_max;
- uint val_mask;
- uint val_min;
- uint val_max;
- int val_valid;
- uint val_min_alt;
- uint val_max_alt;
- int val_valid_alt;
- uint addr;
-};
-
-static sysmon_table_t sysmon_table[] = {
- {
- "Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable,
- 1, 1, -32768, 32767, 0xFFFF,
- 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0,
- 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
- REG_TEMPERATURE,
- },
-
- {
- "+ 5 V", "V", &sysmon_dspic, NULL, NULL,
- 100, 1000, -0x8000, 0x7FFF, 0xFFFF,
- 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
- 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
- REG_VOLTAGE_5V,
- },
-
- {
- "+ 5 V standby", "V", &sysmon_dspic, NULL, NULL,
- 100, 1000, -0x8000, 0x7FFF, 0xFFFF,
- 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
- 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
- REG_VOLTAGE_5V_STANDBY,
- },
-
- {
- "Temperature", "°C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable,
- 1, 1, -32768, 32767, 0xFFFF,
- 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0,
- 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
- REG_TEMPERATURE,
- },
-};
-
-int sysmon_init_f(void)
-{
- sysmon_t **l;
-
- for (l = sysmon_list; *l; l++)
- (*l)->init(*l);
-
- return 0;
-}
-
-void sysmon_reloc(void)
-{
- /* Do nothing for now, sysmon_reloc() is required by the sysmon post */
-}
-
-static char *sysmon_unit_value(sysmon_table_t *s, uint val)
-{
- static char buf[32];
- char *p, sign;
- int decimal, frac;
- int unit_val;
-
- unit_val = s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
-
- if (val == -1)
- return "I/O ERROR";
-
- if (unit_val < 0) {
- sign = '-';
- unit_val = -unit_val;
- } else {
- sign = '+';
- }
-
- p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
-
- frac = unit_val % s->unit_div;
- frac /= (s->unit_div / s->unit_precision);
-
- decimal = s->unit_precision;
-
- if (decimal != 1)
- *p++ = '.';
- for (decimal /= 10; decimal != 0; decimal /= 10)
- *p++ = '0' + (frac / decimal) % 10;
- strcpy(p, s->unit_name);
-
- return buf;
-}
-
-static void sysmon_dspic_init(sysmon_t *this)
-{
-}
-
-static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val)
-{
- ushort data;
-
- if (dspic_read(addr, &data) == 0){
- /* To fit into the table range we should add 0x8000 */
- *val = data + 0x8000;
- return 0;
- }
-
- return -1;
-}
-
-static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val)
-{
- ushort data;
-
- if (dspic_read(addr, &data) == 0){
- /* To fit into the table range we should add 0x8000 */
- *val = (signed short)data + 0x8000;
- return 0;
- }
-
- return -1;
-}
-
-static void sysmon_backlight_disable(sysmon_table_t *this)
-{
-#if defined(CONFIG_VIDEO)
- board_backlight_switch(this->val_valid_alt);
-#endif
-}
-
-int sysmon_post_test(int flags)
-{
- int res = 0;
- sysmon_table_t * t;
- int val;
-
- for (t = sysmon_table; t < sysmon_table + ARRAY_SIZE(sysmon_table); t++) {
- t->val_valid = 1;
- if (t->exec_before)
- t->exec_before(t);
-
- if (t->sysmon->read(t->sysmon, t->addr, &val) != 0) {
- t->val_valid = 0;
- t->val_valid_alt = 0;
- post_log(": read failed\n");
- res = 1;
- break;
- }
-
- if (t->val_valid != 0) {
- t->val_valid = val >= t->val_min && val <= t->val_max;
- t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
- }
-
- if (t->exec_after)
- t->exec_after(t);
-
- if ((!t->val_valid) || (flags)) {
- post_log("\n\t%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
- post_log("allowed range");
- post_log(" %-8s ..", sysmon_unit_value(t, t->val_min));
- post_log(" %-8s", sysmon_unit_value(t, t->val_max));
- post_log(" %s", t->val_valid ? "OK" : "FAIL");
- }
-
- if (!t->val_valid) {
- res = 1;
- break;
- }
- }
- post_log("\n");
-
- return res;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
deleted file mode 100644
index 1332da21d0..0000000000
--- a/post/board/lwmon5/watchdog.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/* This test verifies if the reason of last reset was an abnormal voltage
- * condition, than it performs watchdog test, measuing time required to
- * trigger watchdog reset.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
-
-#include <watchdog.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/io.h>
-
-static uint watchdog_magic_read(void)
-{
- return in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
- CONFIG_SYS_WATCHDOG_MAGIC_MASK;
-}
-
-static void watchdog_magic_write(uint value)
-{
- out_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR, value |
- (in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
- ~CONFIG_SYS_WATCHDOG_MAGIC_MASK));
-}
-
-int sysmon1_post_test(int flags)
-{
- if (gpio_read_in_bit(CONFIG_SYS_GPIO_SYSMON_STATUS) == 0) {
- /*
- * 3.1. GPIO62 is low
- * Assuming system voltage failure.
- */
- post_log("sysmon1 Abnormal voltage detected (GPIO62)\n");
- post_log("POST sysmon1 FAILED\n");
- return 1;
- } else {
- post_log("sysmon1 PASSED\n");
- }
-
- return 0;
-}
-
-int lwmon5_watchdog_post_test(int flags)
-{
- /* On each reset scratch register 1 should be tested,
- * but first test GPIO62:
- */
- if (!(flags & POST_MANUAL) && sysmon1_post_test(flags)) {
- /* 3.1. GPIO62 is low
- * Assuming system voltage failure.
- */
- /* 3.1.1. Set scratch register 1 to 0x0000xxxx */
- watchdog_magic_write(0);
- /* 3.1.2. Mark test as failed due to voltage?! */
- return 1;
- }
-
- if (watchdog_magic_read() != CONFIG_SYS_WATCHDOG_MAGIC) {
- /* 3.2. Scratch register 1 differs from magic value 0x1248xxxx
- * Assuming PowerOn
- */
- int ints;
- ulong base;
- ulong time;
-
- /* 3.2.1. Set magic value to scratch register */
- watchdog_magic_write(CONFIG_SYS_WATCHDOG_MAGIC);
-
- ints = disable_interrupts ();
- /* 3.2.2. strobe watchdog once */
- WATCHDOG_RESET();
- out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, 0);
- /* 3.2.3. save time of strobe in scratch register 2 */
- base = post_time_ms (0);
-
- /* 3.2.4. Wait for 150 ms (enough for reset to happen) */
- while ((time = post_time_ms (base)) < 150)
- out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, time);
- if (ints)
- enable_interrupts ();
-
- /* 3.2.5. Reset didn't happen. - Set 0x0000xxxx
- * into scratch register 1
- */
- watchdog_magic_write(0);
- /* 3.2.6. Mark test as failed. */
- post_log("hw watchdog time : %u ms, failed ", time);
- return 2;
- } else {
- /* 3.3. Scratch register matches magic value 0x1248xxxx
- * Assume this is watchdog-initiated reset
- */
- ulong time;
- /* 3.3.1. So, the test succeed, save measured time to syslog. */
- time = in_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR);
- if (time > 90 ) { /* ms*/
- post_log("hw watchdog time : %u ms, passed ", time);
- /* 3.3.2. Set scratch register 1 to 0x0000xxxx */
- watchdog_magic_write(0);
- return 0;
- } else {
- /*test minimum watchdogtime */
- post_log("hw watchdog time : %u ms, failed ", time);
- return 2;
- }
- }
- return -1;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile
deleted file mode 100644
index e9ec286c7c..0000000000
--- a/post/cpu/ppc4xx/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += cache_4xx.o
-obj-y += cache.o
-obj-y += denali_ecc.o
-obj-y += ether.o
-obj-y += fpu.o
-obj-y += ocm.o
-obj-y += spr.o
-obj-y += uart.o
-obj-y += watchdog.o
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
deleted file mode 100644
index e5ea5335e3..0000000000
--- a/post/cpu/ppc4xx/cache.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/* Cache test
- *
- * This test verifies the CPU data and instruction cache using
- * several test scenarios.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_CACHE
-
-#include <asm/mmu.h>
-#include <watchdog.h>
-
-#define CACHE_POST_SIZE 1024
-
-int cache_post_test1 (int tlb, void *p, int size);
-int cache_post_test2 (int tlb, void *p, int size);
-int cache_post_test3 (int tlb, void *p, int size);
-int cache_post_test4 (int tlb, void *p, int size);
-int cache_post_test5 (int tlb, void *p, int size);
-int cache_post_test6 (int tlb, void *p, int size);
-
-#ifdef CONFIG_440
-static unsigned char testarea[CACHE_POST_SIZE]
-__attribute__((__aligned__(CACHE_POST_SIZE)));
-#endif
-
-int cache_post_test (int flags)
-{
- void *virt = (void *)CONFIG_SYS_POST_CACHE_ADDR;
- int ints;
- int res = 0;
- int tlb = -1; /* index to the victim TLB entry */
-
- /*
- * All 44x variants deal with cache management differently
- * because they have the address translation always enabled.
- * The 40x ppc's don't use address translation in U-Boot at all,
- * so we have to distinguish here between 40x and 44x.
- */
-#ifdef CONFIG_440
- int word0, i;
-
- /*
- * Allocate a new TLB entry, since we are going to modify
- * the write-through and caching inhibited storage attributes.
- */
- program_tlb((u32)testarea, (u32)virt, CACHE_POST_SIZE,
- TLB_WORD2_I_ENABLE);
-
- /* Find the TLB entry */
- for (i = 0;; i++) {
- if (i >= PPC4XX_TLB_SIZE) {
- printf ("Failed to program tlb entry\n");
- return -1;
- }
- word0 = mftlb1(i);
- if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) {
- tlb = i;
- break;
- }
- }
-#endif
- ints = disable_interrupts ();
-
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE);
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE);
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE);
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE);
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE);
- WATCHDOG_RESET ();
- if (res == 0)
- res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE);
-
- if (ints)
- enable_interrupts ();
-
-#ifdef CONFIG_440
- remove_tlb((u32)virt, CACHE_POST_SIZE);
-#endif
-
- return res;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S
deleted file mode 100644
index 15a133cfa8..0000000000
--- a/post/cpu/ppc4xx/cache_4xx.S
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-
-#include <post.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_CACHE
-
- .text
-
- /*
- * All 44x variants deal with cache management differently
- * because they have the address translation always enabled.
- * The 40x ppc's don't use address translation in U-Boot at all,
- * so we have to distinguish here between 40x and 44x.
- */
-#ifdef CONFIG_440
-/* void cache_post_disable (int tlb)
- */
-cache_post_disable:
- tlbre r0, r3, 0x0002
- ori r0, r0, TLB_WORD2_I_ENABLE@l
- tlbwe r0, r3, 0x0002
- sync
- isync
- blr
-
-/* void cache_post_wt (int tlb)
- */
-cache_post_wt:
- tlbre r0, r3, 0x0002
- ori r0, r0, TLB_WORD2_W_ENABLE@l
- andi. r0, r0, ~TLB_WORD2_I_ENABLE@l
- tlbwe r0, r3, 0x0002
- sync
- isync
- blr
-
-/* void cache_post_wb (int tlb)
- */
-cache_post_wb:
- tlbre r0, r3, 0x0002
- andi. r0, r0, ~TLB_WORD2_W_ENABLE@l
- andi. r0, r0, ~TLB_WORD2_I_ENABLE@l
- tlbwe r0, r3, 0x0002
- sync
- isync
- blr
-#else
-/* void cache_post_disable (int tlb)
- */
-cache_post_disable:
- lis r0, 0x0000
- ori r0, r0, 0x0000
- mtdccr r0
- sync
- isync
- blr
-
-/* void cache_post_wt (int tlb)
- */
-cache_post_wt:
- lis r0, 0x8000
- ori r0, r0, 0x0000
- mtdccr r0
- lis r0, 0x8000
- ori r0, r0, 0x0000
- mtdcwr r0
- sync
- isync
- blr
-
-/* void cache_post_wb (int tlb)
- */
-cache_post_wb:
- lis r0, 0x8000
- ori r0, r0, 0x0000
- mtdccr r0
- lis r0, 0x0000
- ori r0, r0, 0x0000
- mtdcwr r0
- sync
- isync
- blr
-#endif
-
-/* void cache_post_dinvalidate (void *p, int size)
- */
-cache_post_dinvalidate:
- dcbi r0, r3
- addi r3, r3, CONFIG_SYS_CACHELINE_SIZE
- subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE
- bgt cache_post_dinvalidate
- sync
- blr
-
-/* void cache_post_dstore (void *p, int size)
- */
-cache_post_dstore:
- dcbst r0, r3
- addi r3, r3, CONFIG_SYS_CACHELINE_SIZE
- subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE
- bgt cache_post_dstore
- sync
- blr
-
-/* void cache_post_dtouch (void *p, int size)
- */
-cache_post_dtouch:
- dcbt r0, r3
- addi r3, r3, CONFIG_SYS_CACHELINE_SIZE
- subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE
- bgt cache_post_dtouch
- sync
- blr
-
-/* void cache_post_iinvalidate (void)
- */
-cache_post_iinvalidate:
- iccci r0, r0
- sync
- blr
-
-/* void cache_post_memset (void *p, int val, int size)
- */
-cache_post_memset:
- mtctr r5
-1:
- stb r4, 0(r3)
- addi r3, r3, 1
- bdnz 1b
- blr
-
-/* int cache_post_check (void *p, int size)
- */
-cache_post_check:
- mtctr r4
-1:
- lbz r0, 0(r3)
- addi r3, r3, 1
- cmpwi r0, 0xff
- bne 2f
- bdnz 1b
- li r3, 0
- blr
-2:
- li r3, -1
- blr
-
-#define CACHE_POST_DISABLE() \
- mr r3, r10; \
- bl cache_post_disable
-
-#define CACHE_POST_WT() \
- mr r3, r10; \
- bl cache_post_wt
-
-#define CACHE_POST_WB() \
- mr r3, r10; \
- bl cache_post_wb
-
-#define CACHE_POST_DINVALIDATE() \
- mr r3, r11; \
- mr r4, r12; \
- bl cache_post_dinvalidate
-
-#define CACHE_POST_DFLUSH() \
- mr r3, r11; \
- mr r4, r12; \
- bl cache_post_dflush
-
-#define CACHE_POST_DSTORE() \
- mr r3, r11; \
- mr r4, r12; \
- bl cache_post_dstore
-
-#define CACHE_POST_DTOUCH() \
- mr r3, r11; \
- mr r4, r12; \
- bl cache_post_dtouch
-
-#define CACHE_POST_IINVALIDATE() \
- bl cache_post_iinvalidate
-
-#define CACHE_POST_MEMSET(val) \
- mr r3, r11; \
- li r4, val; \
- mr r5, r12; \
- bl cache_post_memset
-
-#define CACHE_POST_CHECK() \
- mr r3, r11; \
- mr r4, r12; \
- bl cache_post_check; \
- mr r13, r3
-
-/*
- * Write and read 0xff pattern with caching enabled.
- */
- .global cache_post_test1
-cache_post_test1:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WB()
- CACHE_POST_DINVALIDATE()
-
- /* Write the negative pattern to the test area */
- CACHE_POST_MEMSET(0xff)
-
- /* Read the test area */
- CACHE_POST_CHECK()
-
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- mr r3, r13
- mtlr r9
- blr
-
-/*
- * Write zeroes with caching enabled.
- * Write 0xff pattern with caching disabled.
- * Read 0xff pattern with caching enabled.
- */
- .global cache_post_test2
-cache_post_test2:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WB()
- CACHE_POST_DINVALIDATE()
-
- /* Write the zero pattern to the test area */
- CACHE_POST_MEMSET(0)
-
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- /* Write the negative pattern to the test area */
- CACHE_POST_MEMSET(0xff)
-
- CACHE_POST_WB()
-
- /* Read the test area */
- CACHE_POST_CHECK()
-
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- mr r3, r13
- mtlr r9
- blr
-
-/*
- * Write-through mode test.
- * Write zeroes, store the cache, write 0xff pattern.
- * Invalidate the cache.
- * Check that 0xff pattern is read.
- */
- .global cache_post_test3
-cache_post_test3:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WT()
- CACHE_POST_DINVALIDATE()
-
- /* Cache the test area */
- CACHE_POST_DTOUCH()
-
- /* Write the zero pattern to the test area */
- CACHE_POST_MEMSET(0)
-
- CACHE_POST_DSTORE()
-
- /* Write the negative pattern to the test area */
- CACHE_POST_MEMSET(0xff)
-
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- /* Read the test area */
- CACHE_POST_CHECK()
-
- mr r3, r13
- mtlr r9
- blr
-
-/*
- * Write-back mode test.
- * Write 0xff pattern, store the cache, write zeroes.
- * Invalidate the cache.
- * Check that 0xff pattern is read.
- */
- .global cache_post_test4
-cache_post_test4:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WB()
- CACHE_POST_DINVALIDATE()
-
- /* Cache the test area */
- CACHE_POST_DTOUCH()
-
- /* Write the negative pattern to the test area */
- CACHE_POST_MEMSET(0xff)
-
- CACHE_POST_DSTORE()
-
- /* Write the zero pattern to the test area */
- CACHE_POST_MEMSET(0)
-
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- /* Read the test area */
- CACHE_POST_CHECK()
-
- mr r3, r13
- mtlr r9
- blr
-
-/*
- * Load the test instructions into the instruction cache.
- * Replace the test instructions.
- * Check that the original instructions are executed.
- */
- .global cache_post_test5
-cache_post_test5:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WT()
- CACHE_POST_IINVALIDATE()
-
- /* Compute r13 = cache_post_test_inst */
- bl cache_post_test5_reloc
-cache_post_test5_reloc:
- mflr r13
- lis r0, (cache_post_test_inst - cache_post_test5_reloc)@h
- ori r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l
- add r13, r13, r0
-
- /* Copy the test instructions to the test area */
- lwz r0, 0(r13)
- stw r0, 0(r11)
- lwz r0, 8(r13)
- stw r0, 4(r11)
- sync
-
- /* Invalidate the cache line */
- icbi r0, r11
- sync
- isync
-
- /* Execute the test instructions */
- mtlr r11
- blrl
-
- /* Replace the test instruction */
- lwz r0, 4(r13)
- stw r0, 0(r11)
- sync
-
- /* Do not invalidate the cache line */
- isync
-
- /* Execute the test instructions */
- mtlr r11
- blrl
- mr r13, r3
-
- CACHE_POST_IINVALIDATE()
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- mr r3, r13
- mtlr r9
- blr
-
-/*
- * Load the test instructions into the instruction cache.
- * Replace the test instructions and invalidate the cache.
- * Check that the replaced instructions are executed.
- */
- .global cache_post_test6
-cache_post_test6:
- mflr r9
- mr r10, r3 /* tlb */
- mr r11, r4 /* p */
- mr r12, r5 /* size */
-
- CACHE_POST_WT()
- CACHE_POST_IINVALIDATE()
-
- /* Compute r13 = cache_post_test_inst */
- bl cache_post_test6_reloc
-cache_post_test6_reloc:
- mflr r13
- lis r0, (cache_post_test_inst - cache_post_test6_reloc)@h
- ori r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l
- add r13, r13, r0
-
- /* Copy the test instructions to the test area */
- lwz r0, 4(r13)
- stw r0, 0(r11)
- lwz r0, 8(r13)
- stw r0, 4(r11)
- sync
-
- /* Invalidate the cache line */
- icbi r0, r11
- sync
- isync
-
- /* Execute the test instructions */
- mtlr r11
- blrl
-
- /* Replace the test instruction */
- lwz r0, 0(r13)
- stw r0, 0(r11)
- sync
-
- /* Invalidate the cache line */
- icbi r0, r11
- sync
- isync
-
- /* Execute the test instructions */
- mtlr r11
- blrl
- mr r13, r3
-
- CACHE_POST_IINVALIDATE()
- CACHE_POST_DINVALIDATE()
- CACHE_POST_DISABLE()
-
- mr r3, r13
- mtlr r9
- blr
-
-/* Test instructions.
- */
-cache_post_test_inst:
- li r3, 0
- li r3, -1
- blr
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c
deleted file mode 100644
index ad5e64fbb0..0000000000
--- a/post/cpu/ppc4xx/denali_ecc.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2007
- * Developed for DENX Software Engineering GmbH.
- *
- * Author: Pavel Kolesnikov <concord@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <watchdog.h>
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_ECC
-
-/*
- * MEMORY ECC test
- *
- * This test performs the checks ECC facility of memory.
- */
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/ppc440.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(DEBUG)
-const static uint8_t syndrome_codes[] = {
- 0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
- 0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
- 0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
- 0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A,
- 0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62,
- 0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A,
- 0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23,
- 0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B,
- 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01
-};
-#endif
-
-#define ECC_START_ADDR 0x10
-#define ECC_STOP_ADDR 0x2000
-#define ECC_PATTERN 0x01010101
-#define ECC_PATTERN_CORR 0x11010101
-#define ECC_PATTERN_UNCORR 0x61010101
-
-inline static void disable_ecc(void)
-{
- uint32_t value;
-
- sync(); /* Wait for any pending memory accesses to complete. */
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_ECC_DISABLE);
-}
-
-inline static void clear_and_enable_ecc(void)
-{
- uint32_t value;
-
- sync(); /* Wait for any pending memory accesses to complete. */
- mfsdram(DDR0_00, value);
- mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_ECC_ENABLE);
-}
-
-static uint32_t get_ecc_status(void)
-{
- uint32_t int_status;
-#if defined(DEBUG)
- uint8_t syndrome;
- uint32_t hdata, ldata, haddr, laddr;
- uint32_t value;
-#endif
-
- mfsdram(DDR0_00, int_status);
- int_status &= DDR0_00_INT_STATUS_MASK;
-
-#if defined(DEBUG)
- if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) {
- mfsdram(DDR0_32, laddr);
- mfsdram(DDR0_33, haddr);
- haddr &= 0x00000001;
- if (int_status & DDR0_00_INT_STATUS_BIT1)
- debug("Multiple accesses");
- else
- debug("A single access");
-
- debug(" outside the defined physical memory space detected\n"
- " addr = 0x%01x%08x\n", haddr, laddr);
- }
- if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) {
- unsigned int bit;
-
- mfsdram(DDR0_23, value);
- syndrome = (value >> 16) & 0xff;
- for (bit = 0; bit < sizeof(syndrome_codes); bit++)
- if (syndrome_codes[bit] == syndrome)
- break;
-
- mfsdram(DDR0_38, laddr);
- mfsdram(DDR0_39, haddr);
- haddr &= 0x00000001;
- mfsdram(DDR0_40, ldata);
- mfsdram(DDR0_41, hdata);
- if (int_status & DDR0_00_INT_STATUS_BIT3)
- debug("Multiple correctable ECC events");
- else
- debug("Single correctable ECC event");
-
- debug(" detected\n 0x%01x%08x - 0x%08x%08x, bit - %d\n",
- haddr, laddr, hdata, ldata, bit);
- }
- if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) {
- mfsdram(DDR0_23, value);
- syndrome = (value >> 8) & 0xff;
- mfsdram(DDR0_34, laddr);
- mfsdram(DDR0_35, haddr);
- haddr &= 0x00000001;
- mfsdram(DDR0_36, ldata);
- mfsdram(DDR0_37, hdata);
- if (int_status & DDR0_00_INT_STATUS_BIT5)
- debug("Multiple uncorrectable ECC events");
- else
- debug("Single uncorrectable ECC event");
-
- debug(" detected\n 0x%01x%08x - 0x%08x%08x, "
- "syndrome - 0x%02x\n",
- haddr, laddr, hdata, ldata, syndrome);
- }
- if (int_status & DDR0_00_INT_STATUS_BIT6)
- debug("DRAM initialization complete\n");
-#endif /* defined(DEBUG) */
-
- return int_status;
-}
-
-static int test_ecc(uint32_t ecc_addr)
-{
- uint32_t value;
- volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr;
- int ret = 0;
-
- WATCHDOG_RESET();
-
- debug("Entering test_ecc(0x%08x)\n", ecc_addr);
- /* Set up correct ECC in memory */
- disable_ecc();
- clear_and_enable_ecc();
- out_be32(ecc_mem, ECC_PATTERN);
- out_be32(ecc_mem + 1, ECC_PATTERN);
- ppcDcbf((u32)ecc_mem);
-
- /* Verify no ECC error reading back */
- value = in_be32(ecc_mem);
- disable_ecc();
- if (ECC_PATTERN != value) {
- debug("Data read error (no-error case): "
- "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
- ret = 1;
- }
- value = get_ecc_status();
- if (0x00000000 != value) {
- /* Expected no ECC status reported */
- debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
- 0x00000000, value);
- ret = 1;
- }
-
- /* Test for correctable error by creating a one-bit error */
- out_be32(ecc_mem, ECC_PATTERN_CORR);
- ppcDcbf((u32)ecc_mem);
- clear_and_enable_ecc();
- value = in_be32(ecc_mem);
- disable_ecc();
- /* Test that the corrected data was read */
- if (ECC_PATTERN != value) {
- debug("Data read error (correctable-error case): "
- "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
- ret = 1;
- }
- value = get_ecc_status();
- if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) {
- /* Expected a single correctable error reported */
- debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
- DDR0_00_INT_STATUS_BIT2, value);
- ret = 1;
- }
-
- /* Test for uncorrectable error by creating a two-bit error */
- out_be32(ecc_mem, ECC_PATTERN_UNCORR);
- ppcDcbf((u32)ecc_mem);
- clear_and_enable_ecc();
- value = in_be32(ecc_mem);
- disable_ecc();
- /* Test that the corrected data was read */
- if (ECC_PATTERN_UNCORR != value) {
- debug("Data read error (uncorrectable-error case): "
- "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR,
- value);
- ret = 1;
- }
- value = get_ecc_status();
- if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) {
- /* Expected a single uncorrectable error reported */
- debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
- DDR0_00_INT_STATUS_BIT4, value);
- ret = 1;
- }
-
- /* Remove error from SDRAM and enable ECC. */
- out_be32(ecc_mem, ECC_PATTERN);
- ppcDcbf((u32)ecc_mem);
- clear_and_enable_ecc();
-
- return ret;
-}
-
-int ecc_post_test(int flags)
-{
- int ret = 0;
- uint32_t value;
- uint32_t iaddr;
-
- mfsdram(DDR0_22, value);
- if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
- debug("SDRAM ECC not enabled, skipping ECC POST.\n");
- return 0;
- }
-
- /* Mask all interrupts. */
- mfsdram(DDR0_01, value);
- mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
- | DDR0_01_INT_MASK_ALL_OFF);
-
- for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
- ret = test_ecc(iaddr);
- if (ret)
- break;
- }
- /*
- * Clear possible errors resulting from ECC testing. (If not done, we
- * we could get an interrupt later on when exceptions are enabled.)
- */
- set_mcsr(get_mcsr());
- debug("ecc_post_test() returning %d\n", ret);
- return ret;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
deleted file mode 100644
index 8a4c56b7d6..0000000000
--- a/post/cpu/ppc4xx/ether.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/*
- * Ethernet test
- *
- * The Ethernet Media Access Controllers (EMAC) are tested in the
- * internal loopback mode.
- * The controllers are configured accordingly and several packets
- * are transmitted. The configurable test parameters are:
- * MIN_PACKET_LENGTH - minimum size of packet to transmit
- * MAX_PACKET_LENGTH - maximum size of packet to transmit
- * CONFIG_SYS_POST_ETH_LOOPS - Number of test loops. Each loop
- * is tested with a different frame length. Starting with
- * MAX_PACKET_LENGTH and going down to MIN_PACKET_LENGTH.
- * Defaults to 10 and can be overridden in the board config header.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_ETHER
-
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-mal.h>
-#include <asm/ppc4xx-emac.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Get count of EMAC devices (doesn't have to be the max. possible number
- * supported by the cpu)
- *
- * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
- * EMAC count is possible. As it is needed for the Kilauea/Haleakala
- * 405EX/405EXr eval board, using the same binary.
- */
-#if defined(CONFIG_BOARD_EMAC_COUNT)
-#define LAST_EMAC_NUM board_emac_count()
-#else /* CONFIG_BOARD_EMAC_COUNT */
-#if defined(CONFIG_HAS_ETH3)
-#define LAST_EMAC_NUM 4
-#elif defined(CONFIG_HAS_ETH2)
-#define LAST_EMAC_NUM 3
-#elif defined(CONFIG_HAS_ETH1)
-#define LAST_EMAC_NUM 2
-#else
-#define LAST_EMAC_NUM 1
-#endif
-#endif /* CONFIG_BOARD_EMAC_COUNT */
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
-#endif
-
-#define MIN_PACKET_LENGTH 64
-#define MAX_PACKET_LENGTH 1514
-#ifndef CONFIG_SYS_POST_ETH_LOOPS
-#define CONFIG_SYS_POST_ETH_LOOPS 10
-#endif
-#define PACKET_INCR ((MAX_PACKET_LENGTH - MIN_PACKET_LENGTH) / \
- CONFIG_SYS_POST_ETH_LOOPS)
-
-static volatile mal_desc_t tx __cacheline_aligned;
-static volatile mal_desc_t rx __cacheline_aligned;
-static char *tx_buf;
-static char *rx_buf;
-
-int board_emac_count(void);
-
-static void ether_post_init (int devnum, int hw_addr)
-{
- int i;
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned mode_reg;
- sys_info_t sysinfo;
-#endif
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
- unsigned long mfr;
-#endif
-
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- /* Need to get the OPB frequency so we can access the PHY */
- get_sys_info (&sysinfo);
-#endif
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- /* provide clocks for EMAC internal loopback */
- mfsdr (SDR0_MFR, mfr);
- mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
- mtsdr (SDR0_MFR, mfr);
- sync ();
-#endif
- /* reset emac */
- out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
- sync ();
-
- for (i = 0;; i++) {
- if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST))
- break;
- if (i >= 1000) {
- printf ("Timeout resetting EMAC\n");
- break;
- }
- udelay (1000);
- }
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- /* Whack the M1 register */
- mode_reg = 0x0;
- if (sysinfo.freqOPB <= 50000000);
- else if (sysinfo.freqOPB <= 66666667)
- mode_reg |= EMAC_MR1_OBCI_66;
- else if (sysinfo.freqOPB <= 83333333)
- mode_reg |= EMAC_MR1_OBCI_83;
- else if (sysinfo.freqOPB <= 100000000)
- mode_reg |= EMAC_MR1_OBCI_100;
- else
- mode_reg |= EMAC_MR1_OBCI_GT100;
-
- out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg);
-
-#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-
- /* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
- MAL_CR_PLBLT_DEFAULT | 0x00330000);
-#else
- mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
- /* Errata 1.12: MAL_1 -- Disable MAL bursting */
- if (get_pvr() == PVR_440GP_RB) {
- mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
- }
-#endif
- /* setup buffer descriptors */
- tx.ctrl = MAL_TX_CTRL_WRAP;
- tx.data_len = 0;
- tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
-
- rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
- rx.data_len = 0;
- rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
- flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
- flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
-
- switch (devnum) {
- case 1:
- /* setup MAL tx & rx channel pointers */
-#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
- mtdcr (MAL0_TXCTP2R, &tx);
-#else
- mtdcr (MAL0_TXCTP1R, &tx);
-#endif
-#if defined(CONFIG_440)
- mtdcr (MAL0_TXBADDR, 0x0);
- mtdcr (MAL0_RXBADDR, 0x0);
-#endif
- mtdcr (MAL0_RXCTP1R, &rx);
- /* set RX buffer size */
- mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16);
- break;
- case 0:
- default:
- /* setup MAL tx & rx channel pointers */
-#if defined(CONFIG_440)
- mtdcr (MAL0_TXBADDR, 0x0);
- mtdcr (MAL0_RXBADDR, 0x0);
-#endif
- mtdcr (MAL0_TXCTP0R, &tx);
- mtdcr (MAL0_RXCTP0R, &rx);
- /* set RX buffer size */
- mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16);
- break;
- }
-
- /* Enable MAL transmit and receive channels */
-#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
- mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2)));
-#else
- mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum));
-#endif
- mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum));
-
- /* set internal loopback mode */
-#ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
- out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 |
- EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
- EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
- in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
-#else
- out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE |
- EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
- EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
- in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
-#endif
-
- /* set transmit enable & receive enable */
- out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE);
-
- /* enable broadcast address */
- out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE);
-
- /* set transmit request threshold register */
- out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */
-
- /* set receive low/high water mark register */
-#if defined(CONFIG_440)
- /* 440s has a 64 byte burst length */
- out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000);
-#else
- /* 405s have a 16 byte burst length */
- out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
-#endif /* defined(CONFIG_440) */
- out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000);
-
- /* Set fifo limit entry in tx mode 0 */
- out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003);
- /* Frame gap set */
- out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008);
- sync ();
-}
-
-static void ether_post_halt (int devnum, int hw_addr)
-{
- int i = 0;
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- unsigned long mfr;
-#endif
-
- /* 1st reset MAL channel */
- /* Note: writing a 0 to a channel has no effect */
-#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
- mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2));
-#else
- mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum);
-#endif
- mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum);
-
- /* wait for reset */
- while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) {
- if (i++ >= 1000)
- break;
- udelay (1000);
- }
- /* emac reset */
- out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- /* remove clocks for EMAC internal loopback */
- mfsdr (SDR0_MFR, mfr);
- mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
- mtsdr (SDR0_MFR, mfr);
-#endif
-}
-
-static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
-{
- int i = 0;
-
- while (tx.ctrl & MAL_TX_CTRL_READY) {
- if (i++ > 100) {
- printf ("TX timeout\n");
- return;
- }
- udelay (1000);
- invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
- }
- tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
- EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
- tx.data_len = length;
- memcpy (tx.data_ptr, packet, length);
- flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
- flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
- sync ();
-
- out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0);
- sync ();
-}
-
-static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
-{
- int length;
- int i = 0;
-
- while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
- if (i++ > 100) {
- printf ("RX timeout\n");
- return 0;
- }
- udelay (1000);
- invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
- }
- length = rx.data_len - 4;
- if (length <= max_length) {
- invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length);
- memcpy(packet, rx.data_ptr, length);
- }
- sync ();
-
- rx.ctrl |= MAL_RX_CTRL_EMPTY;
- flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
- sync ();
-
- return length;
-}
-
- /*
- * Test routines
- */
-
-static void packet_fill (char *packet, int length)
-{
- char c = (char) length;
- int i;
-
- /* set up ethernet header */
- memset (packet, 0xff, 14);
-
- for (i = 14; i < length; i++) {
- packet[i] = c++;
- }
-}
-
-static int packet_check (char *packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 14; i < length; i++) {
- if (packet[i] != c++)
- return -1;
- }
-
- return 0;
-}
-
- char packet_send[MAX_PACKET_LENGTH];
- char packet_recv[MAX_PACKET_LENGTH];
-static int test_ctlr (int devnum, int hw_addr)
-{
- int res = -1;
- int length;
- int l;
-
- ether_post_init (devnum, hw_addr);
-
- for (l = MAX_PACKET_LENGTH; l >= MIN_PACKET_LENGTH;
- l -= PACKET_INCR) {
- packet_fill (packet_send, l);
-
- ether_post_send (devnum, hw_addr, packet_send, l);
-
- length = ether_post_recv (devnum, hw_addr, packet_recv,
- sizeof (packet_recv));
-
- if (length != l || packet_check (packet_recv, length) < 0) {
- goto Done;
- }
- }
-
- res = 0;
-
-Done:
-
- ether_post_halt (devnum, hw_addr);
-
- if (res != 0) {
- post_log ("EMAC%d test failed\n", devnum);
- }
-
- return res;
-}
-
-int ether_post_test (int flags)
-{
- int res = 0;
- int i;
-
- /* Allocate tx & rx packet buffers */
- tx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
- rx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
-
- if (!tx_buf || !rx_buf) {
- printf ("Failed to allocate packet buffers\n");
- res = -1;
- goto out_free;
- }
-
- for (i = 0; i < LAST_EMAC_NUM; i++) {
- if (test_ctlr (i, i*0x100))
- res = -1;
- }
-
-out_free:
- free (tx_buf);
- free (rx_buf);
-
- return res;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */
diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c
deleted file mode 100644
index 51e53ff2c8..0000000000
--- a/post/cpu/ppc4xx/fpu.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Sergei Poselenov <sposelenov@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-
-#if defined(CONFIG_440EP) || \
- defined(CONFIG_440EPX)
-
-#include <asm/processor.h>
-#include <asm/ppc4xx.h>
-
-
-int fpu_status(void)
-{
- if (mfspr(SPRN_CCR0) & CCR0_DAPUIB)
- return 0; /* Disabled */
- else
- return 1; /* Enabled */
-}
-
-
-void fpu_disable(void)
-{
- mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB);
- mtmsr(mfmsr() & ~MSR_FP);
-}
-
-
-void fpu_enable(void)
-{
- mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB);
- mtmsr(mfmsr() | MSR_FP);
-}
-
-#endif
diff --git a/post/cpu/ppc4xx/ocm.c b/post/cpu/ppc4xx/ocm.c
deleted file mode 100644
index bbf2d9a8ee..0000000000
--- a/post/cpu/ppc4xx/ocm.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2008 Ilya Yanok, EmCraft Systems, yanok@emcraft.com
- *
- * Developed for DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-/*
- * This test attempts to verify on-chip memory (OCM). Result is written
- * to the scratch register and if test succeed it won't be run till next
- * power on.
- */
-
-#include <post.h>
-
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define OCM_TEST_PATTERN1 0x55555555
-#define OCM_TEST_PATTERN2 0xAAAAAAAA
-
-#if CONFIG_POST & CONFIG_SYS_POST_OCM
-
-static uint ocm_status_read(void)
-{
- return in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
- CONFIG_SYS_OCM_STATUS_MASK;
-}
-
-static void ocm_status_write(uint value)
-{
- out_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR, value |
- (in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
- ~CONFIG_SYS_OCM_STATUS_MASK));
-}
-
-static inline int ocm_test_word(uint value, uint *address)
-{
- uint read_value;
-
- *address = value;
- sync();
- read_value = *address;
-
- return (read_value != value);
-}
-
-int ocm_post_test(int flags)
-{
- uint old_value;
- int ret = 0;
- uint *address = (uint*)CONFIG_SYS_OCM_BASE;
-
- if (ocm_status_read() == CONFIG_SYS_OCM_STATUS_OK)
- return 0;
- for (; address < (uint*)(CONFIG_SYS_OCM_BASE + CONFIG_SYS_OCM_SIZE); address++) {
- old_value = *address;
- if (ocm_test_word(OCM_TEST_PATTERN1, address) ||
- ocm_test_word(OCM_TEST_PATTERN2, address)) {
- ret = 1;
- *address = old_value;
- printf("OCM POST failed at %p!\n", address);
- break;
- }
- *address = old_value;
- }
- ocm_status_write(ret ? CONFIG_SYS_OCM_STATUS_FAIL : CONFIG_SYS_OCM_STATUS_OK);
- return ret;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_OCM */
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
deleted file mode 100644
index 9a3cdb3cf8..0000000000
--- a/post/cpu/ppc4xx/spr.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/*
- * SPR test
- *
- * The test checks the contents of Special Purpose Registers (SPR) listed
- * in the spr_test_list array below.
- * Each SPR value is read using mfspr instruction, some bits are masked
- * according to the table and the resulting value is compared to the
- * corresponding table value.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_SPR
-
-#include <asm/processor.h>
-
-#ifdef CONFIG_4xx_DCACHE
-#include <asm/mmu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-static struct {
- int number;
- char * name;
- unsigned long mask;
- unsigned long value;
-} spr_test_list [] = {
- /* Standard Special-Purpose Registers */
-
- {0x001, "XER", 0x00000000, 0x00000000},
- {0x008, "LR", 0x00000000, 0x00000000},
- {0x009, "CTR", 0x00000000, 0x00000000},
- {0x016, "DEC", 0x00000000, 0x00000000},
- {0x01a, "SRR0", 0x00000000, 0x00000000},
- {0x01b, "SRR1", 0x00000000, 0x00000000},
- {0x110, "SPRG0", 0x00000000, 0x00000000},
- {0x111, "SPRG1", 0x00000000, 0x00000000},
- {0x112, "SPRG2", 0x00000000, 0x00000000},
- {0x113, "SPRG3", 0x00000000, 0x00000000},
- {0x11f, "PVR", 0x00000000, 0x00000000},
-
- /* Additional Special-Purpose Registers.
- * The values must match the initialization
- * values from arch/powerpc/cpu/ppc4xx/start.S
- */
- {0x30, "PID", 0x00000000, 0x00000000},
- {0x3a, "CSRR0", 0x00000000, 0x00000000},
- {0x3b, "CSRR1", 0x00000000, 0x00000000},
- {0x3d, "DEAR", 0x00000000, 0x00000000},
- {0x3e, "ESR", 0x00000000, 0x00000000},
-#ifdef CONFIG_440
- {0x3f, "IVPR", 0xffff0000, 0x00000000},
-#endif
- {0x100, "USPRG0", 0x00000000, 0x00000000},
- {0x104, "SPRG4", 0x00000000, 0x00000000},
- {0x105, "SPRG5", 0x00000000, 0x00000000},
- {0x106, "SPRG6", 0x00000000, 0x00000000},
- {0x107, "SPRG7", 0x00000000, 0x00000000},
- {0x10c, "TBL", 0x00000000, 0x00000000},
- {0x10d, "TBU", 0x00000000, 0x00000000},
-#ifdef CONFIG_440
- {0x11e, "PIR", 0x0000000f, 0x00000000},
-#endif
- {0x130, "DBSR", 0x00000000, 0x00000000},
- {0x134, "DBCR0", 0x00000000, 0x00000000},
- {0x135, "DBCR1", 0x00000000, 0x00000000},
- {0x136, "DBCR2", 0x00000000, 0x00000000},
- {0x138, "IAC1", 0x00000000, 0x00000000},
- {0x139, "IAC2", 0x00000000, 0x00000000},
- {0x13a, "IAC3", 0x00000000, 0x00000000},
- {0x13b, "IAC4", 0x00000000, 0x00000000},
- {0x13c, "DAC1", 0x00000000, 0x00000000},
- {0x13d, "DAC2", 0x00000000, 0x00000000},
- {0x13e, "DVC1", 0x00000000, 0x00000000},
- {0x13f, "DVC2", 0x00000000, 0x00000000},
- {0x150, "TSR", 0x00000000, 0x00000000},
- {0x154, "TCR", 0x00000000, 0x00000000},
-#ifdef CONFIG_440
- {0x190, "IVOR0", 0x0000fff0, 0x00000100},
- {0x191, "IVOR1", 0x0000fff0, 0x00000200},
- {0x192, "IVOR2", 0x0000fff0, 0x00000300},
- {0x193, "IVOR3", 0x0000fff0, 0x00000400},
- {0x194, "IVOR4", 0x0000fff0, 0x00000500},
- {0x195, "IVOR5", 0x0000fff0, 0x00000600},
- {0x196, "IVOR6", 0x0000fff0, 0x00000700},
- {0x197, "IVOR7", 0x0000fff0, 0x00000800},
- {0x198, "IVOR8", 0x0000fff0, 0x00000c00},
- {0x199, "IVOR9", 0x00000000, 0x00000000},
- {0x19a, "IVOR10", 0x0000fff0, 0x00000900},
- {0x19b, "IVOR11", 0x00000000, 0x00000000},
- {0x19c, "IVOR12", 0x00000000, 0x00000000},
- {0x19d, "IVOR13", 0x0000fff0, 0x00001300},
- {0x19e, "IVOR14", 0x0000fff0, 0x00001400},
- {0x19f, "IVOR15", 0x0000fff0, 0x00002000},
-#endif
- {0x23a, "MCSRR0", 0x00000000, 0x00000000},
- {0x23b, "MCSRR1", 0x00000000, 0x00000000},
- {0x23c, "MCSR", 0x00000000, 0x00000000},
- {0x370, "INV0", 0x00000000, 0x00000000},
- {0x371, "INV1", 0x00000000, 0x00000000},
- {0x372, "INV2", 0x00000000, 0x00000000},
- {0x373, "INV3", 0x00000000, 0x00000000},
- {0x374, "ITV0", 0x00000000, 0x00000000},
- {0x375, "ITV1", 0x00000000, 0x00000000},
- {0x376, "ITV2", 0x00000000, 0x00000000},
- {0x377, "ITV3", 0x00000000, 0x00000000},
- {0x378, "CCR1", 0x00000000, 0x00000000},
- {0x390, "DNV0", 0x00000000, 0x00000000},
- {0x391, "DNV1", 0x00000000, 0x00000000},
- {0x392, "DNV2", 0x00000000, 0x00000000},
- {0x393, "DNV3", 0x00000000, 0x00000000},
- {0x394, "DTV0", 0x00000000, 0x00000000},
- {0x395, "DTV1", 0x00000000, 0x00000000},
- {0x396, "DTV2", 0x00000000, 0x00000000},
- {0x397, "DTV3", 0x00000000, 0x00000000},
-#ifdef CONFIG_440
- {0x398, "DVLIM", 0x0fc1f83f, 0x0001f800},
- {0x399, "IVLIM", 0x0fc1f83f, 0x0001f800},
-#endif
- {0x39b, "RSTCFG", 0x00000000, 0x00000000},
- {0x39c, "DCDBTRL", 0x00000000, 0x00000000},
- {0x39d, "DCDBTRH", 0x00000000, 0x00000000},
- {0x39e, "ICDBTRL", 0x00000000, 0x00000000},
- {0x39f, "ICDBTRH", 0x00000000, 0x00000000},
- {0x3b2, "MMUCR", 0x00000000, 0x00000000},
- {0x3b3, "CCR0", 0x00000000, 0x00000000},
- {0x3d3, "ICDBDR", 0x00000000, 0x00000000},
- {0x3f3, "DBDR", 0x00000000, 0x00000000},
-};
-
-static int spr_test_list_size = ARRAY_SIZE(spr_test_list);
-
-int spr_post_test (int flags)
-{
- int ret = 0;
- int i;
-
- unsigned long code[] = {
- 0x7c6002a6, /* mfspr r3,SPR */
- 0x4e800020 /* blr */
- };
- unsigned long (*get_spr) (void) = (void *) code;
-
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
- for (i = 0; i < spr_test_list_size; i++) {
- int num = spr_test_list[i].number;
-
- /* mfspr r3,num */
- code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
-
- asm volatile ("isync");
-
- if ((get_spr () & spr_test_list[i].mask) !=
- (spr_test_list[i].value & spr_test_list[i].mask)) {
- post_log ("The value of %s special register "
- "is incorrect: 0x%08X\n",
- spr_test_list[i].name, get_spr ());
- ret = -1;
- }
- }
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
-
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
deleted file mode 100644
index 545b054c2b..0000000000
--- a/post/cpu/ppc4xx/uart.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * Copyright 2010, Stefan Roese, DENX Software Engineering, sr@denx.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <serial.h>
-
-/*
- * UART test
- *
- * The controllers are configured to loopback mode and several
- * characters are transmitted.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_UART
-
-/*
- * This table defines the UART's that should be tested and can
- * be overridden in the board config file
- */
-#ifndef CONFIG_SYS_POST_UART_TABLE
-#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
- CONFIG_SYS_NS16550_COM2, CONFIG_SYS_NS16550_COM3, \
- CONFIG_SYS_NS16550_COM4 }
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int test_ctlr (struct NS16550 *com_port, int index)
-{
- int res = -1;
- char test_str[] = "*** UART Test String ***\r\n";
- int i;
- int divisor;
-
- divisor = (get_serial_clock() + (gd->baudrate * (16 / 2))) /
- (16 * gd->baudrate);
- NS16550_init(com_port, divisor);
-
- /*
- * Set internal loopback mode in UART
- */
- out_8(&com_port->mcr, in_8(&com_port->mcr) | UART_MCR_LOOP);
-
- /* Reset FIFOs */
- out_8(&com_port->fcr, UART_FCR_RXSR | UART_FCR_TXSR);
- udelay(100);
-
- /* Flush RX-FIFO */
- while (NS16550_tstc(com_port))
- NS16550_getc(com_port);
-
- for (i = 0; i < sizeof (test_str) - 1; i++) {
- NS16550_putc(com_port, test_str[i]);
- if (NS16550_getc(com_port) != test_str[i])
- goto done;
- }
- res = 0;
-done:
- if (res)
- post_log ("uart%d test failed\n", index);
-
- return res;
-}
-
-int uart_post_test (int flags)
-{
- int i, res = 0;
- static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
-
- for (i = 0; i < ARRAY_SIZE(base); i++) {
- if (test_ctlr((struct NS16550 *)base[i], i))
- res = -1;
- }
- serial_reinit_all ();
-
- return res;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c
deleted file mode 100644
index 24e80939a9..0000000000
--- a/post/cpu/ppc4xx/watchdog.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Igor Lisitsin <igor@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/*
- * Watchdog test
- *
- * The test verifies the watchdog timer operation.
- * On the first iteration, the test routine disables interrupts and
- * makes a 10-second delay. If the system does not reboot during this delay,
- * the watchdog timer is not operational and the test fails. If the system
- * reboots, on the second iteration the test routine reports a success.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
-
-#include <watchdog.h>
-
-int watchdog_post_test (int flags)
-{
- if (flags & POST_REBOOT) {
- /* Test passed */
- return 0;
- }
- else {
- /* 10-second delay */
- int ints = disable_interrupts ();
- ulong base = post_time_ms (0);
-
- while (post_time_ms (base) < 10000)
- ;
- if (ints)
- enable_interrupts ();
-
- /*
- * If we have reached this point, the watchdog timer
- * does not work
- */
- return -1;
- }
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/post/lib_powerpc/cpu.c b/post/lib_powerpc/cpu.c
index 63a861e4dd..915eb0a764 100644
--- a/post/lib_powerpc/cpu.c
+++ b/post/lib_powerpc/cpu.c
@@ -66,10 +66,6 @@ int cpu_post_test (int flags)
WATCHDOG_RESET();
if (ic)
icache_disable ();
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
if (ret == 0)
ret = cpu_post_test_cmp ();
@@ -118,10 +114,6 @@ int cpu_post_test (int flags)
if (ic)
icache_enable ();
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
WATCHDOG_RESET();
generated by cgit (git 2.34.1) at 2024-12-23 01:52:33 +0000