diff options
Diffstat (limited to 'tools/binman')
-rw-r--r-- | tools/binman/README | 44 | ||||
-rw-r--r-- | tools/binman/cmdline.py | 6 | ||||
-rw-r--r-- | tools/binman/control.py | 35 | ||||
-rw-r--r-- | tools/binman/ftest.py | 82 | ||||
-rw-r--r-- | tools/binman/image.py | 150 | ||||
-rw-r--r-- | tools/binman/test/130_list_fdtmap.dts | 36 |
6 files changed, 352 insertions, 1 deletions
diff --git a/tools/binman/README b/tools/binman/README index 9860633792..146e0fd470 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -490,6 +490,49 @@ see README.entries. This is generated from the source code using: binman entry-docs >tools/binman/README.entries +Listing images +-------------- + +It is possible to list the entries in an existing firmware image created by +binman, provided that there is an 'fdtmap' entry in the image. For example: + + $ binman ls -i image.bin + Name Image-pos Size Entry-type Offset Uncomp-size + ---------------------------------------------------------------------- + main-section c00 section 0 + u-boot 0 4 u-boot 0 + section 5fc section 4 + cbfs 100 400 cbfs 0 + u-boot 138 4 u-boot 38 + u-boot-dtb 180 108 u-boot-dtb 80 3b5 + u-boot-dtb 500 1ff u-boot-dtb 400 3b5 + fdtmap 6fc 381 fdtmap 6fc + image-header bf8 8 image-header bf8 + +This shows the hierarchy of the image, the position, size and type of each +entry, the offset of each entry within its parent and the uncompressed size if +the entry is compressed. + +It is also possible to list just some files in an image, e.g. + + $ binman ls -i image.bin section/cbfs + Name Image-pos Size Entry-type Offset Uncomp-size + -------------------------------------------------------------------- + cbfs 100 400 cbfs 0 + u-boot 138 4 u-boot 38 + u-boot-dtb 180 108 u-boot-dtb 80 3b5 + +or with wildcards: + + $ binman ls -i image.bin "*cb*" "*head*" + Name Image-pos Size Entry-type Offset Uncomp-size + ---------------------------------------------------------------------- + cbfs 100 400 cbfs 0 + u-boot 138 4 u-boot 38 + u-boot-dtb 180 108 u-boot-dtb 80 3b5 + image-header bf8 8 image-header bf8 + + Hashing Entries --------------- @@ -825,7 +868,6 @@ Some ideas: - Add an option to decode an image into the constituent binaries - Support building an image for a board (-b) more completely, with a configurable build directory -- Support listing files in images - Support logging of binman's operations, with different levels of verbosity - Support updating binaries in an image (with no size change / repacking) - Support updating binaries in an image (with repacking) diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py index a002105fc7..508232eabb 100644 --- a/tools/binman/cmdline.py +++ b/tools/binman/cmdline.py @@ -65,6 +65,12 @@ controlled by a description in the board device tree.''' entry_parser = subparsers.add_parser('entry-docs', help='Write out entry documentation (see README.entries)') + list_parser = subparsers.add_parser('ls', help='List files in an image') + list_parser.add_argument('-i', '--image', type=str, required=True, + help='Image filename to list') + list_parser.add_argument('paths', type=str, nargs='*', + help='Paths within file to list (wildcard)') + test_parser = subparsers.add_parser('test', help='Run tests') test_parser.add_argument('-P', '--processes', type=int, help='set number of processes to use for running tests') diff --git a/tools/binman/control.py b/tools/binman/control.py index 35faf11506..813c8b1bf9 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -67,6 +67,37 @@ def WriteEntryDocs(modules, test_missing=None): from entry import Entry Entry.WriteDocs(modules, test_missing) + +def ListEntries(image_fname, entry_paths): + """List the entries in an image + + This decodes the supplied image and displays a table of entries from that + image, preceded by a header. + + Args: + image_fname: Image filename to process + entry_paths: List of wildcarded paths (e.g. ['*dtb*', 'u-boot*', + 'section/u-boot']) + """ + image = Image.FromFile(image_fname) + + entries, lines, widths = image.GetListEntries(entry_paths) + + num_columns = len(widths) + for linenum, line in enumerate(lines): + if linenum == 1: + # Print header line + print('-' * (sum(widths) + num_columns * 2)) + out = '' + for i, item in enumerate(line): + width = -widths[i] + if item.startswith('>'): + width = -width + item = item[1:] + txt = '%*s ' % (width, item) + out += txt + print(out.rstrip()) + def Binman(args): """The main control code for binman @@ -87,6 +118,10 @@ def Binman(args): command.Run(pager, fname) return 0 + if args.cmd == 'ls': + ListEntries(args.image, args.paths) + return 0 + # Try to figure out which device tree contains our image description if args.dt: dtb_fname = args.dt diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 4f58ce3c85..ad828041f3 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -2341,6 +2341,88 @@ class TestFunctional(unittest.TestCase): image = Image.FromFile(image_fname) self.assertIn("Cannot find FDT map in image", str(e.exception)) + def testListCmd(self): + """Test listing the files in an image using an Fdtmap""" + self._CheckLz4() + data = self._DoReadFileRealDtb('130_list_fdtmap.dts') + + # lz4 compression size differs depending on the version + image = control.images['image'] + entries = image.GetEntries() + section_size = entries['section'].size + fdt_size = entries['section'].GetEntries()['u-boot-dtb'].size + fdtmap_offset = entries['fdtmap'].offset + + image_fname = tools.GetOutputFilename('image.bin') + with test_util.capture_sys_output() as (stdout, stderr): + self._DoBinman('ls', '-i', image_fname) + lines = stdout.getvalue().splitlines() + expected = [ +'Name Image-pos Size Entry-type Offset Uncomp-size', +'----------------------------------------------------------------------', +'main-section 0 c00 section 0', +' u-boot 0 4 u-boot 0', +' section 100 %x section 100' % section_size, +' cbfs 100 400 cbfs 0', +' u-boot 138 4 u-boot 38', +' u-boot-dtb 180 10f u-boot-dtb 80 3c9', +' u-boot-dtb 500 %x u-boot-dtb 400 3c9' % fdt_size, +' fdtmap %x 395 fdtmap %x' % + (fdtmap_offset, fdtmap_offset), +' image-header bf8 8 image-header bf8', + ] + self.assertEqual(expected, lines) + + def testListCmdFail(self): + """Test failing to list an image""" + self._DoReadFile('005_simple.dts') + image_fname = tools.GetOutputFilename('image.bin') + with self.assertRaises(ValueError) as e: + self._DoBinman('ls', '-i', image_fname) + self.assertIn("Cannot find FDT map in image", str(e.exception)) + + def _RunListCmd(self, paths, expected): + """List out entries and check the result + + Args: + paths: List of paths to pass to the list command + expected: Expected list of filenames to be returned, in order + """ + self._CheckLz4() + self._DoReadFileRealDtb('130_list_fdtmap.dts') + image_fname = tools.GetOutputFilename('image.bin') + image = Image.FromFile(image_fname) + lines = image.GetListEntries(paths)[1] + files = [line[0].strip() for line in lines[1:]] + self.assertEqual(expected, files) + + def testListCmdSection(self): + """Test listing the files in a section""" + self._RunListCmd(['section'], + ['section', 'cbfs', 'u-boot', 'u-boot-dtb', 'u-boot-dtb']) + + def testListCmdFile(self): + """Test listing a particular file""" + self._RunListCmd(['*u-boot-dtb'], ['u-boot-dtb', 'u-boot-dtb']) + + def testListCmdWildcard(self): + """Test listing a wildcarded file""" + self._RunListCmd(['*boot*'], + ['u-boot', 'u-boot', 'u-boot-dtb', 'u-boot-dtb']) + + def testListCmdWildcardMulti(self): + """Test listing a wildcarded file""" + self._RunListCmd(['*cb*', '*head*'], + ['cbfs', 'u-boot', 'u-boot-dtb', 'image-header']) + + def testListCmdEmpty(self): + """Test listing a wildcarded file""" + self._RunListCmd(['nothing'], []) + + def testListCmdPath(self): + """Test listing the files in a sub-entry of a section""" + self._RunListCmd(['section/cbfs'], ['cbfs', 'u-boot', 'u-boot-dtb']) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index 487290b6c4..2c5668e2a9 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -8,6 +8,7 @@ from __future__ import print_function from collections import OrderedDict +import fnmatch from operator import attrgetter import re import sys @@ -147,3 +148,152 @@ class Image(section.Entry_section): entries = [] self.ListEntries(entries, 0) return entries + + def FindEntryPath(self, entry_path): + """Find an entry at a given path in the image + + Args: + entry_path: Path to entry (e.g. /ro-section/u-boot') + + Returns: + Entry object corresponding to that past + + Raises: + ValueError if no entry found + """ + parts = entry_path.split('/') + entries = self.GetEntries() + parent = '/' + for part in parts: + entry = entries.get(part) + if not entry: + raise ValueError("Entry '%s' not found in '%s'" % + (part, parent)) + parent = entry.GetPath() + entries = entry.GetEntries() + return entry + + def ReadData(self, decomp=True): + return self._data + + def GetListEntries(self, entry_paths): + """List the entries in an image + + This decodes the supplied image and returns a list of entries from that + image, preceded by a header. + + Args: + entry_paths: List of paths to match (each can have wildcards). Only + entries whose names match one of these paths will be printed + + Returns: + String error message if something went wrong, otherwise + 3-Tuple: + List of EntryInfo objects + List of lines, each + List of text columns, each a string + List of widths of each column + """ + def _EntryToStrings(entry): + """Convert an entry to a list of strings, one for each column + + Args: + entry: EntryInfo object containing information to output + + Returns: + List of strings, one for each field in entry + """ + def _AppendHex(val): + """Append a hex value, or an empty string if val is None + + Args: + val: Integer value, or None if none + """ + args.append('' if val is None else '>%x' % val) + + args = [' ' * entry.indent + entry.name] + _AppendHex(entry.image_pos) + _AppendHex(entry.size) + args.append(entry.etype) + _AppendHex(entry.offset) + _AppendHex(entry.uncomp_size) + return args + + def _DoLine(lines, line): + """Add a line to the output list + + This adds a line (a list of columns) to the output list. It also updates + the widths[] array with the maximum width of each column + + Args: + lines: List of lines to add to + line: List of strings, one for each column + """ + for i, item in enumerate(line): + widths[i] = max(widths[i], len(item)) + lines.append(line) + + def _NameInPaths(fname, entry_paths): + """Check if a filename is in a list of wildcarded paths + + Args: + fname: Filename to check + entry_paths: List of wildcarded paths (e.g. ['*dtb*', 'u-boot*', + 'section/u-boot']) + + Returns: + True if any wildcard matches the filename (using Unix filename + pattern matching, not regular expressions) + False if not + """ + for path in entry_paths: + if fnmatch.fnmatch(fname, path): + return True + return False + + entries = self.BuildEntryList() + + # This is our list of lines. Each item in the list is a list of strings, one + # for each column + lines = [] + HEADER = ['Name', 'Image-pos', 'Size', 'Entry-type', 'Offset', + 'Uncomp-size'] + num_columns = len(HEADER) + + # This records the width of each column, calculated as the maximum width of + # all the strings in that column + widths = [0] * num_columns + _DoLine(lines, HEADER) + + # We won't print anything unless it has at least this indent. So at the + # start we will print nothing, unless a path matches (or there are no + # entry paths) + MAX_INDENT = 100 + min_indent = MAX_INDENT + path_stack = [] + path = '' + indent = 0 + selected_entries = [] + for entry in entries: + if entry.indent > indent: + path_stack.append(path) + elif entry.indent < indent: + path_stack.pop() + if path_stack: + path = path_stack[-1] + '/' + entry.name + indent = entry.indent + + # If there are entry paths to match and we are not looking at a + # sub-entry of a previously matched entry, we need to check the path + if entry_paths and indent <= min_indent: + if _NameInPaths(path[1:], entry_paths): + # Print this entry and all sub-entries (=higher indent) + min_indent = indent + else: + # Don't print this entry, nor any following entries until we get + # a path match + min_indent = MAX_INDENT + continue + _DoLine(lines, _EntryToStrings(entry)) + selected_entries.append(entry) + return selected_entries, lines, widths diff --git a/tools/binman/test/130_list_fdtmap.dts b/tools/binman/test/130_list_fdtmap.dts new file mode 100644 index 0000000000..449fccc41d --- /dev/null +++ b/tools/binman/test/130_list_fdtmap.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <0xc00>; + u-boot { + }; + section { + align = <0x100>; + cbfs { + size = <0x400>; + u-boot { + cbfs-type = "raw"; + }; + u-boot-dtb { + cbfs-type = "raw"; + cbfs-compress = "lzma"; + cbfs-offset = <0x80>; + }; + }; + u-boot-dtb { + compress = "lz4"; + }; + }; + fdtmap { + }; + image-header { + location = "end"; + }; + }; +}; |