summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-21arm: include: rockchip: Add rk3399 pmu fileJagan Teki
Add pmu header file for rk3399 SoC, this will help to configure pmu in sdram driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDR4 mr detectionJagan Teki
Like data training in other sdram types, mr detection need to taken care for lpddr4 with looped rank and associated channel to make sure the proper configuration held. Once the mr detection successful for active and configured rank with channel number, the same can later reused during actual LPDDR4 initialization. So, add code to support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Handle data training via opsJagan Teki
data training can be even required for lpddr4 and we need to keep the lpddr4 code to compile only for relevant boards which do support lpddr4. For this requirement, and for code readability handle data training via sdram_rk3399_ops and same will update in future while supporting lpddr4 code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Simplify data training first argumentJagan Teki
data training is using chan_info as first argument with channel number as second argument instead of that use dram_info as first argument so-that we can get the chan_info at data training definition. This was the argument handling is meaningful, readable and it would help to add similar data training for lpddr4 in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref_mode_acJagan Teki
Update vref_mode_ac for lpddr4 based on VDDQ/3/2=16.8% Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 mode_sel based on io settingsJagan Teki
The mode_sel on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref based on io settingsJagan Teki
The vref_mode_dq, vref_value_dq on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Get lpddr4 tsel_rd_en from io settingsJagan Teki
For base.odt 1 the lpddr4 tsel_rd_en value is depending on IO settings of rd_odt_en. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure soc odt supportJagan Teki
CTL 145, 146, 159, 160 registers are used to configure soc odt on rk3399. These soc odt values are updated from CS0_MR22_VAL and CS1_MR22_VAL and for lpddr4 these values ORed with tsel_rd_select_n. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Add tsel control clock driveJagan Teki
tsel contrl clock drives are required to configure PHY 929, 939 controls drive settings. Add support for these control clock for all dramtype sdrams. Thse control clock drives are configure via tsel_ckcs_select_p and tsel_ckcs_select_n variables. tsel_ckcs_select_n is PHY_DRV_ODT_34_3 value where as tsel_ckcs_select_p is retrived from IO settings for lpddr4 and rest uses PHY_DRV_ODT_34_3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: sdram: Configure lpddr4 tsel rd, wr based on IO settingsJagan Teki
Now we have IO settings available for all supported sdram frequencies, so retrieve these IO settings and make used for LPDDR4 ds odt configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Add IO settingsJagan Teki
Add IO settings for dram ctl and phy. IO settings are useful for configuring ctl, phy odt, vref, mr5, mode select and other needed input output operations for lpddr4 or any other dramtype sdram. Right now, this patch added IO setting for all supported sdram frequencies. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1Jagan Teki
The hardware for LPDDR4 with - CLK0P/N connect to lower 16-bits - CLK1P/N connect to higher 16-bits and usually dfi dram clk is configured via CLK1P/N, so disabling dfi dram clk will disable the CLK1P/N as well. So, add patch to not to disable dfi dram clk for lpddr4, with rank 1. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure tsel write ca for lpddr4Jagan Teki
tsel write ca_p and ca_n values need to write on PHY 544, 672 and 800 to configure ds odt. Configure the same PHY register for lpddr4 would require a mask value of (300 << 8). Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Map chipselect for lpddr4Jagan Teki
Assign desired cs_map values for lpddr4 during set memory map. Initial cs_map values is based on the sdram parameters, so the same will adjusted based dramtype as LPDDR4. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4Jagan Teki
Configure PHY RX_CM_INPUT for lpddr4 during phy IO config. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure SLEWP_EN, SLEWN_EN for lpddr4Jagan Teki
Configure SLEWP_EN, SLEWN_EN for lpddr4 during phy IO config. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN for lpddr4Jagan Teki
Configure BOOSTP_EN, BOOSTN_EN for lpddr4 during phy IO config. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure PHY_898, PHY_919 for lpddr4Jagan Teki
PHY_898, PHY_919 would require to configure PHY LP4 boot pll control and ca for lpddr4. So, configure the same in pctl_cfg for LPDDR4. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Avoid two channel ZQ Cal Start at the same timeJagan Teki
It is possible in lpddr4 dram, where both the channels would start at same time with ZQ Cal Start. If it uses ZQ Call start then it will use RZQ. For example LPDDR4 366 Dual-Die, Quad-Channel Package, RZQ maybe connect to both channel. If ZQ Cal Start at the same time, it will use the same RZQ. It is not a problem of using RZQ in both the channels, but can not use at the same time. So, to avoid this, we have an option of dram tINIT3 value for increasing the frequency for channel 1. This patch increase the available tINIT3 with existing running dram frequency. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Don't wait for PLL lock in lpddr4Jagan Teki
lpddr4 has PLL bypass mode during phy initialization phase, which does all pll configurations. So no need to wait explicitly during pctl config. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Move mode_sel assignmentJagan Teki
mode_sel assignment is based on dram type. In phy_io_config, already have vref setting based on the dram type, so move this mode_sel assignment on vref setting area. No functionality change. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add lpddr4 rank mask for wdql trainingJagan Teki
Add rank_mask based on the rank number for lpddr4. This would keep the wdql data training loop based on the desired rank mask value instead of looping for all values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add lpddr4 rank mask for ca trainingJagan Teki
Add rank_mask based on the rank number for lpddr4. This would keep the ca data training loop based on the desired rank mask value instead of looping for all values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rockchip: Kconfig: Add RK3399 LPDDR4 entryJagan Teki
Supporting LPDDR4 code support in RK3399 would increases the size of SPL/TPL. So add kconfig entry for RK3399 LPDDR4 code so-that the boards have LPDDR4 can enable them via defconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure phy IO in ds odtJagan Teki
Some dramtypes like lpddr4 initialization would required to configure phy IO even after pctl_cfg and after set_ds_odt. For those cases the set_ds_odt would be an initial call to setup the phy. To satisfy all the cases, trigger phy IO from set_ds_odt. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add DdrModeJagan Teki
Add DdrMode structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddrtimingC0Jagan Teki
Add DdrTimingC0 structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddr version enc macroJagan Teki
Add dram config macro for handling ddr version number. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Introduce sys_reg3 for more capacity infoJagan Teki
cs0_row, cs1_row and cs1_col needs more bits to show its correct value, update to make use of both sys_reg2, sys_reg3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash similar patches into one patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Rename sys_reg with sys_reg2Jagan Teki
Use dram config variable name as sys_reg2 instead of sys_reg since the final variable value is to written into a pmugrf register named as sys_reg2. This reflect the both variable and associated register names are same and also help to add next sys_reg's to add it in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Simply existing dram enc macroJagan Teki
Add simplified and meaningful macro for all setting. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash the similar patches into 1 patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Enable sdram debug functionsJagan Teki
This would help to debug the sdram base parameters while debugging existing chip or while supporting new sdram type. It require explicit enablement of CONFIG_RAM_ROCKCHIP_DEBUG for showing the debug prints. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add rank detection supportJagan Teki
Right now the rk3399 sdram driver assume that the board has configured with 2 channels, so any possibility to enable single channel on the same driver will encounter channel #1 data training failure. Log: U-Boot TPL board init sdram_init: data training failed rk3399_dmc_init DRAM init failed -5 So, add an algorithm that can capable to compute the active or configured rank with associated channel like a) do rank loop to compute the active rank, with associated channel numbers b) then, succeed the data training only for configured channel c) preserve the rank for given channel d) do channel loop for setting the active channel e) if given rank is zero or inactive on the specific channel, clear the timings for the associated channel f) finally, return error if number of channels is zero Tested in NanoPI-NEO4 since it support single channel sdram configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (add PI_READ_GATE_TRAINING for LPDDR3 to support rk3399-evb case) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Compute stride for 1 channel aJagan Teki
Add stride computation for the sdram which support single channel a This configuration available in NanoPi NEO4 and the same can work with existing rk3399-sdram-ddr3-1866.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Compute stride for 2 channelsJagan Teki
stride value from sdram timings can be computed dynamically based on the determined capacity for the given channel. Right now these stride values are taken as part of sdram timings via dtsi, but it possible to use same timings dtsi for given frequency even though the configured board sdram do support single channel with different size by dynamically detect the stride value. Example, NanoPi NEO4 do have DDR3-1866, but with single channel and 1GB size with dynamic stride detection it is possible to use existing rk3399-sdram-ddr3-1866.dtsi whose stride, number of channels and capacity it support is d efferent. So, add initial support to calculate the stride value for 2 channels sdram, which is available by default on existing boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: debug: Add sdram_print_strideJagan Teki
Add code to print the channel stride, this would help to print the stride of associated channel. Here is sample print on LPDDR4, 50MHz. 256B stride Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: debug: Get the cs capacityJagan Teki
Add code to get the channel capacity, this would help to print the capacity of specific channel. Here is sample print on LPDDR4, 50MHz channel 0 BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: debug: Add sdram_print_ddr_infoJagan Teki
Add sdram ddr info print support, this would help to observe the sdram base parameters. Here is sample print on LPDDR4, 50MHz channel 0 BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: Add debug sdram driverJagan Teki
Add sdram driver to handle debug across rockchip SoCs. This would help to improve code debugging feature for sdram drivers in rockchip family, whoever wants to debug the driver should call these core debug code on their respective platform sdram drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19debug_uart: Add printdecJagan Teki
Add printdec, this would help to print an output a decimalism value. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: Add initial KconfigJagan Teki
Right now sdram drivers in rockchip SoC are built based on the SoC configs which may not be an adequate solutions while adding common or debug driver. So, add meaningful Kconfig options start with rk3399. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Add pctl start supportJagan Teki
Add support for pctl start for both channel 0, 1 control and phy registers. This would also handle pwrup_srefresh_exit init based on the channel number. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Move pwrup_srefresh_exit to dram_infoJagan Teki
Add pwrup_srefresh_exit to be part of dram_info so-that the it can help to support pwrup_srefresh_exit in individual channels while starting pctl in future. No functionality change. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Add phy pctrl reset supportJagan Teki
Add support for phy pctrl reset support for both channel 0, 1. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Use rank mask in wdql data trainingJagan Teki
Add rank_mask based on the rank number, this would keep the wdql data training loop based on the desired rank mask value instead of looping for all values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Use rank mask in ca data trainingJagan Teki
Add rank_mask based on the rank number, this would keep the ca data training loop based on the desired rank mask value instead of looping for all values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Clear PI_175 interrupts in data trainingJagan Teki
Clear the PI_175 interrupts before processing actual data training in all relevant calls. This would help to clear interrupt from previous training. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Handle data training return typesJagan Teki
data trainings calls like ca, wl, rg, rl, wdql have proper return types with -EIO and the return type missed to handle in data_training function. This patch, add proper return type checks along with useful debug statement on each data training calls. Incidentally this would help to prevent the sdram initialization hang for single channel dram and when the code is trying to initialize second channel with proper return type of relevant data training call might failed. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19clk: rockchip: rk3399: Fix check patch warnings and checksJagan Teki
- CHECK: spaces preferred around that '*' - CHECK: spaces preferred around that '/' - CHECK: space preferred before that '|' - WARNING: macros should not use a trailing semicolon - CHECK: Unnecessary parentheses around 'fbdiv <= min_fbdiv' - CHECK: Unnecessary parentheses around 'parent->id == SCLK_MAC' - CHECK: Unnecessary parentheses around 'parent->dev == clk->dev' - WARNING: line over 80 characters - CHECK: Prefer kernel type 'u8' over 'uint8_t' - Add proper macro definitions arrangements Note: there are still line over 80 characters and other warnings but fixing those making code look unreadable, so I kept it as it is. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-26 18:34:17 +0000