summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-13Enable console log from earlyconsole in Linux bootargsPratiyush Mohan Srivastava
Remove 115200 from "earlycon" to avoid loss of initial log messages during linux kernel 4.1 bootup Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13armv8/ls1043ardb: Add support for >2GB memoryShaohui Xie
This patch also expose the complete DDR region(s) to Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13fsl/ddr: updated ddr errata-A008378 for arm and power SoCsShengzhou Liu
DDR errata-A008378 applies to LS1021-20-22A-R1.0, T1023-R1.0, T1024-R1.0, T1040-42-20-22-R1.0/R1.1, it has been fixed on LS102x Rev2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13fsl/errata: move fsl_errata.h to common directoryShengzhou Liu
move arch/powerpc/include/asm/fsl_errata.h to include/fsl_errata.h to make it public for both ARM and POWER SoCs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix soc.h path in fsl_errata.h] Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13arm: ls102x: add get_svr and IS_SVR_REV helperShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13freescale: fman: make sure phy-handle property is big endianShaohui Xie
When creating phy-handle property, an unsigned int value is created by fdt_create_phandle, and memcpy is used to get the value, since DTS is big endian, the value cannot be used directly on little endian SoCs, it should be converted by cpu_to_fdt32. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13armv8/ls2080ardb: Update DDR settings for four chip-select caseYork Sun
When 4 chip-selects are used, vref should use range 1 and CDT uses 80 ohm, and 2T timing is enabled. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13armv8/ls2080aqds: Update DDR settings for four chip-select caseYork Sun
When 4 chip-selects are used, vref should use range 1 and CDT uses 80 ohm, and 2T timing is enabled. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13driver/ddr/fsl: Update timing config for heavy loadYork Sun
In case four chip-selects are all active, the turnaround times need to increase to avoid overlapping under heavy load. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13driver/ddr/fsl: Update workaround for A008511 for vref rangeYork Sun
The workaround requires different setting for range 1 vs 2. Also adjust timeout value for waiting for controller to be idle. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13driver/ddr/fsl: Update MR5 RTT parkYork Sun
For four chip-selects enabled case, RTT is parked on all of them. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13driver/ddr/fsl: Update DDR4 MR6 for Vref rangeYork Sun
MR6 bit 6 is set accrodingly for range 1 or 2, per JEDEC spec. Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13driver/ddr/fsl: Update DDR4 RTT valuesYork Sun
DDR4 has different RTT value and code according to JEDEC spec. Update the macros and options . Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13part: fix "part list ... -bootable varname" to use hexStephen Warren
Unfortunately U-Boot assumes that almost all numbers are in hex, including partition numbers passed to e.g. "load". So, the command "part list mmc 0 -bootable devplist" should use hex when writing partition numbers into $devplist, so they'll be correctly interpreted. Change-Id: I9a70b19749643876baadb45efbc3decaef8bfee2 Fixes: 0798d6fd4191 ("part: Add support for list filtering on bootable partitions") Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13tools: env: include compiler.hPeter Robinson
With gcc 5.2 and later we get a bunch of "error: unknown type name" for 'uint8_t', 'uint32_t' and friends. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-12-13m68k: add private libgccangelo@sysam.it
Add private libgcc Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-12-13rockchip: firefly: Use tiny-printfSjoerd Simons
Switch to using tiny-printf for the firefly SPL, this reduces the SPL by around 1800 bytes bringing it back under the 32k limit for both gcc 4.9 and gcc 5. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13mmc: mmc: Don't use sprintf when using tiny-printfSjoerd Simons
There is no sprintf implementation in tiny-printf, so don't try to use it when tiny-printf if used. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13lib: split out strtoxxxx functions out of vsprintf.cSjoerd Simons
To allow the various string to number conversion functions to be used when using tiny-printf,split them out into their own file which gets build regardless of what printf implementation is used. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13lib: Split panic functions out of vsprintf.cSjoerd Simons
To allow panic and panic_str to still be used when using tiny-printf, split them out into their own file which gets build regardless of what printf implementation is used. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13lib/tiny-printf.c: Implement vprintfSjoerd Simons
Implement both printf and vprintf for a bit more flexibility, e.g. allows the panic() function to work with tiny-printf. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13spl: use panic_str instead of panicSjoerd Simons
For a simple static string, use panic_str() which prevents calling printf needlessly. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-13rockchip: doc: add imagenameJeffy Chen
We now using imagename to select rockchip's spl hdr & spl size. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13rockchip: mkimage: use imagename to select spl hdr & spl sizeJeffy Chen
Our chips may have different spl size and spl header, so use imagename(passed by "mkimage -n") to select them now. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13Revert "rockchip: Add max spl size & spl header configs"Jeffy Chen
This reverts commit 10b4615f9d7e177ec7fe644fbb2616e0e0956f6e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-12common: cli_hush: Fix up simple typoNishanth Menon
Correct the spelling for character.. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-12siemens,am33x: remove ddr3 delay workaroundEgli, Samuel
Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de>
2015-12-12am33xx,ddr3: fix ddr3 sdram configurationEgli, Samuel
This patch fixes the DDR3 initialization procedure in order to comply with DDR3 standard. A 500 us delay is specified between the DDR3 reset and clock enable signal. Until now, this delay was not respected. Some DDR3 chips don't bother but the bigger the RAM becomes the more likely it seems that this delay is needed. We observed that DRAM > 256 MB from the manufacturer Samsung have an issue when the specification is not respected. Changes: 1) Add a 1 ms wait for L3 timeout error trigger 2) Don't delay DDR3 initialization Bit 31 of emif_sdram_ref_ctrl shouldn't be set because his suppresses the initialization of DDR3 Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Reviewed-by: James Doublesin <doublesin@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de>
2015-12-12VxWorks: fixup MAC address for VxWorksMiao Yan
VxWorks 7 kernels retrieve 'local-mac-addr' from dtb and use that for NIC MAC address. As a result, when booting the same kernel image on multiple boards, there will be address conflicts. So fixup MAC address when booting VxWorks 7 kernels Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-12stm32: Convert serial driver to DMKamil Lulko
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-11Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2015-12-11spi: xilinx: Add new compatible stringsMichal Simek
Add xlnx,xps-spi-2.00.a/b which is compatible string listed in the Linux kernel. Remove origin one which has no real background. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-11mailmap: Update Jagan Teki's name and email addressJagan Teki
Used quite different name's and e-mail address, all of them mapped to standard name and e-mail address. Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Rename sf_ops.c to spi-flash.cJagan Teki
Since all spi-flash core operations are moved into sf_ops.c then it's better to renamed as spi-flash.c Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Use static for file-scope functionsJagan Teki
Used static for file-scope functions in sf_probe.c Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: sf_probe: Remove spi_slave pointer argumentJagan Teki
Since spi_slave is a spi pointer in spi_flash{} then assign spi_slave{} pointer to flash->spi and remove spi_slave pointer argument to - spi_flash_probe_slave - spi_flash_scan Tested-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: ops: Fix missing break on spansion read_barJagan Teki
For assigning read_bar commands in spansion case, break is missing this patch add that break. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Remove unneeded SST_BP and SST_WPJagan Teki
SST parts added on sf_params.c supports both SST_WR which consits of both BP and WP and there is a spi controller ich which supports only BP so the relevent _write hook set based on "slave->op_mode_tx" hence there is no respective change required from flash side hance removed these. Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Remove unneeded header includesJagan Teki
Removed unneeded header includes in sf_ops and sf_probe Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Flash power up read-only based on idcode0Jagan Teki
Using macro's for flash power up read-only access code leads wrong behaviour hence use idcode0 for runtime detection, hence the flash which require this functionality gets detected at runtime. Tested-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Use simple name for register access functionsJagan Teki
Most of the register access function are static, so used simple name to represent each. Tested-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Fix MakefileJagan Teki
This patch removes unneeded ifdef and fixed accordingly. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Use static for file-scope functionsJagan Teki
Use static for file-scope functions and removed them from header files. Tested-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: probe: Code cleanupJagan Teki
- Move bar read code below the bar write hance both at once place, hence it easy for #ifdef macro only once and readable. - Move read_cmd_array at top Tested-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Move read_id code to sf_opsJagan Teki
read_id code is related to spi_flash stuff hence moved to sf_ops. Tested-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: Move spi_flash_scan code to sf_opsJagan Teki
Intension is that sf_ops should deals all spi_flash related stuff and sf_probe (which should renamed future) should be an interface layer for spi_flash versus spi drivers. sf_ops => spi_flash interface sf_probe => interface layer vs spi_flash(sf_probe) to spi drivers Tested-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11sf: spi_flash_validate_params => spi_flash_scanJagan Teki
Rename spi_flash_validate_params to spi_flash_scan as this code not only deals with params setup but also configure all spi_flash attributes. And also moved all flash related code into spi_flash_scan for future functionality addition. Tested-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-11spi: Kconfig: Fix correct target name for ZynqMPMichal Simek
ZynqMP is using different symbol. Use correct one. Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-11spi: zynq_spi: Add cadence compatible stringMichal Simek
Extend compatible list table for cdns,spi-r1p6 compatible string. Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-11imx: mx7dsabresd: Add QSPI supportPeng Fan
Support qspi flashes for mx7dsabresd 1. introduce pin mux settings 2. enable qspi clock 3. introduce related macro definitions Default QSPI is not enabled, since we need hardware rework to use QSPI, see SPF-28590, page 9: " QSPI signals are muxed with EPDC_D[7:0] When using QSPI: de-populate R388-R391, R396-R399 populate R392-R395, R299, R300 " After hardware rework, define CONFIG_FSL_QSPI in mx7dsabresd.h. qspi flashes can be deteced and read/erase/write. Log info: " => sf probe SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB => sf read 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Read: OK => sf erase 0 0x4000000 SF: 67108864 bytes @ 0x0 Erased: OK => sf write 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Written: OK " Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-26 14:52:34 +0000