summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-04watchdog: omap_wdt: Fix WDT coding styleMarek Vasut
Fix obvious coding style problems, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT reloadingMarek Vasut
The watchdog timer value was never updated in the hardware by this driver, so the watchdog triggered on some random stale value that was left in the hardware. The TI SPRUH37C says, quote: 20.4.3.9 Modifying Timer Count/Load Values and Prescaler Setting ... After a write access, the load register value and prescaler ratio registers are updated immediately, but new values are considered only after the next consecutive counter overflow or after a new trigger command (the WDT_WTGR register). This means at least one trigger must happen. The driver probably depended on someone calling it's .reset() callback, however that is not guaranteed e.g. if the WDT operates without servicing. Add this missing trigger. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT timeout configurationMarek Vasut
The timeout parameter of omap3_wdt_start() is in miliseconds, while GET_WLDR_VAL() expects parameter in seconds. Fix this so the WDT driver is actually usable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_a72: Add GPIO supportFaiz Abbas
Enable CONFIG_DA8XX_GPIO to enable GPIO support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-main: Add Support for gpio0Faiz Abbas
Add the main_gpio0 node. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: da8xx_gpio: Add "ti,keystone-gpio" compatibleVignesh Raghavendra
Add "ti,keystone-gpio" compatible so as be able to use Linux DT files as is. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: da8xx_gpio: Fix compiler warningVignesh Raghavendra
Fix below compiler warning for 64bit builds drivers/gpio/da8xx_gpio.c: In function ‘davinci_get_gpio_bank’: drivers/gpio/da8xx_gpio.c:446:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return (struct davinci_gpio *)addr; Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_defconfig: Enable PCA953x IO expanderVignesh Raghavendra
Enable PCA953x IO expander to control MMC/SD power lines. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPLVignesh Raghavendra
IO expanders are required to power cycle SD card. So enable the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expanderVignesh Raghavendra
Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e: Add I2C nodesVignesh Raghavendra
J721e SoC has 2 I2C instances in MCU domain and 7 I2C instances in main domain. Add DT nodes for the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: pca953x_gpio: Add support for 24 bit IO expanderVignesh Raghavendra
J721e EVM has a TCA6424 IO expander that has 24 GPIOs. Add support for the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable DFU related configsVignesh Raghavendra
Enable DFU, Fastboot and USB mass storage gadget related configs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable USB Gadget related configsVignesh Raghavendra
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5_defconfig: Increase early malloc sizeVignesh Raghavendra
Increase R5 SPL early malloc memory pool by ~7K to accommodate SPL USB DFU boot requirements Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm: Add DFU related variablesVignesh Raghavendra
Add configs to download varies stages of bootloader images to RAM during DFU boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral modeVignesh Raghavendra
Enable USB0 in peripheral mode so that it be used for DFU Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: mach-k3: sysfw-loader: Add support to download SYSFW via DFUVignesh Raghavendra
Add support to download SYSFW into internal RAM via DFU in DFU boot mode. Prepare a DFU config entity entry dynamically using buffer address allocated for SYSFW and start DFU gadget to get SYSFW. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: mach-k3: j721e: Rename BOOT_DEVICE_USB to BOOT_DEVICE_DFUVignesh Raghavendra
J721e does not support USB Host MSC boot, but only supports DFU boot. Since BOOT_DEVICE_USB is often used for host boot mode and BOOT_DEVICE_DFU is used for DFU boot, rename BOOT_DEVICE_USB macro to BOOT_DEVICE_DFU Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_a72: Fix redundant environment offsetFaiz Abbas
The current environment offset overlaps with the sysfw area and whenever environment is saved in the redundant slot, it overwrites sysfw.itb. Fix the offset to prevent this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: ti: boot: Use correct dtb and dtbo on Android bootSam Protsenko
Read correct dtb blob from boot.img/recovery.img and apply correct dtbo blobs from dtbo partition. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04env: ti: boot: Boot Android with dynamic partitionsSam Protsenko
Changes: - use boot.img instead of boot_fit.img - use .dtb from boot.img v2 - implement recovery boot - always boot ramdisk from boot.img, we can't mount system as root now, as system is a logical partition inside of super partition - don't add "skip_initramfs" to cmdline anymore - to boot into recovery, use boot image from recovery partition - prepare partition table: - A/B scheme - use 'super' partition instead of 'system' and 'vendor' - add dtbo partitions - introduce metadata partition Not implemented: reading and applying dtbo blobs from dtbo partition. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04env: ti: boot: Respect slot_suffix in AVB commandsSam Protsenko
Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: am57xx_evm: Enable Android commandsSam Protsenko
Enable Android commands that will be needed for Android 10 boot flow implementation, for all AM57x variants. Commands enabled: 1. 'abootimg': - CONFIG_CMD_ABOOTIMG=y 2. 'ab_select': - CONFIG_ANDROID_AB=y - CONFIG_CMD_AB_SELECT=y 3. 'avb': - CONFIG_LIBAVB=y - CONFIG_AVB_VERIFY=y - CONFIG_CMD_AVB=y While at it, resync defconfig files with "make savedefconfig". Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04test/py: android: Add test for abootimgSam Protsenko
Unit test for 'abootimg' command. Right now it covers dtb/dtbo functionality in Android Boot Image v2, which was added recently. Running test: $ ./test/py/test.py --bd sandbox --build -k test_abootimg shows that 1/1 tests passes successfully. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04doc: android: Convert to Sphinx formatSam Protsenko
Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04doc: android: Add documentation for Android Boot ImageSam Protsenko
Describe Android Boot Image format, how its support is implemented in U-Boot and associated commands usage. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04cmd: abootimg: Add abootimg commandSam Protsenko
This command can be used to extract fields and image payloads from Android Boot Image. It can be used for example to implement boot flow where dtb is taken from boot.img (as v2 incorporated dtb inside of boot.img). Using this command, one can obtain needed dtb blob from boot.img in scripting manner, and then apply needed dtbo's (from "dtbo" partition) on top of that, providing then the resulting image to bootm command in order to boot the Android. Also right now this command has the sub-command to get an address and size of recovery dtbo from recovery image (for non-A/B devices only, see [1,2] for details). It can be tested like this: => mmc dev 1 => part start mmc 1 boot_a boot_start => part size mmc 1 boot_a boot_size => mmc read $loadaddr $boot_start $boot_size => abootimg get ver => abootimg dump dtb [1] https://source.android.com/devices/bootloader/boot-image-header [2] https://source.android.com/devices/architecture/dto/partitions Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04image: android: Add routine to get dtbo paramsSam Protsenko
Android Boot Image v1 adds "Recovery DTB" field in image header and associate payload in boot image itself [1]. Payload should be in Android DTB/DTBO format [2]. That "Recovery DTB" area should be only populated for non-A/B devices, and only in recovery image. Add function to get an address and size of that payload. That function can be further used e.g. in 'abootimg' command to provide the user a way to get the address of recovery dtbo from U-Boot shell, which can be further parsed using 'adtimg' command. [1] https://source.android.com/devices/bootloader/boot-image-header [2] https://source.android.com/devices/architecture/dto/partitions Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04image: android: Add functions for handling dtb fieldSam Protsenko
Android Boot Image v2 adds "DTB" payload (and corresponding field in the image header). Provide functions for its handling: - android_image_get_dtb_by_index(): Obtain DTB blob from "DTB" part of boot image, by blob's index - android_image_print_dtb_contents(): Iterate over all DTB blobs in "DTB" part of boot image and print those blobs info "DTB" payload might be in one of the following formats: 1. concatenated DTB blobs 2. Android DTBO format The latter requires "android-image-dt.c" functionality, so this commit selects that file for building for CONFIG_ANDROID_BOOT_IMAGE option. Right now this new functionality isn't used, but it can be used further. As it's required to apply some specific dtbo blob(s) from "dtbo" partition, we can't automate this process inside of "bootm" command. But we can do next: - come up with some new command like "abootimg" to extract dtb blob from boot image (using functions from this patch) - extract desired dtbo blobs from "dtbo" partition using "adtimg" command - merge dtbo blobs into dtb blob using "fdt apply" command - pass resulting dtb blob into bootm command in order to boot the Android kernel with Android ramdisk from boot image Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-02Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU and Cadence USB 3 fixes
2020-02-02dfu: Add option to skip empty pages when flashing UBI images to NANDGuillermo Rodríguez
Add a new option to enable the DROP_FFS flag when flashing UBI images to NAND in order to drop trailing all-0xff pages. This is similar to the existing FASTBOOT_FLASH_NAND_TRIMFFS option. Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com> Cc: Lukasz Majewski <lukma@denx.de>
2020-02-02usb: cdns3: ep0: Invalidate cache before reading Setup PacketVignesh Raghavendra
Invalidate dcache line before accessing Setup Packet contents. Otherwise driver will see stale content on non coherent architecture. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-01Merge tag 'u-boot-rockchip-20200130' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Support redundant boot for rk3399 - Support binman for rockchip platform - Update ram driver and add ddr4 support for rk3328
2020-01-31Merge tag 'uniphier-v2020.04-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 (2nd) Denali NAND driver changes: - Set up more registers in denali-spl for SOCFPGA - Make clocks optional - Do not assert reset signals in the remove hook - associate SPARE_AREA_SKIP_BYTES with DT compatible - switch to UCLASS_MTD UniPhier platform changes: - fix a bug in dram_init() - specify loadaddr for "source" command
2020-02-01ARM: uniphier: use $loadaddr for source commandMasahiro Yamada
If the "source" command is not given the address, it uses CONFIG_SYS_LOAD_ADDR, which is compile-time determined. Using the "loadaddr" environment variable is handier because it is relocated according to the memory base when CONFIG_POSITION_INDEPENDENT is enabled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01ARM: uniphier: set gd->ram_base correctlyMasahiro Yamada
gd->ram_base is not set at all if the end address of the DRAM ch0 exceeds the 4GB limit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01mtd: rawnand: denali_dt: use UCLASS_MTD instead of UCLASS_MISCMasahiro Yamada
UCLASS_MTD is a better fit for NAND drivers. Make NAND_DENALI_DT depend on DM_MTD, which is needed to compile drivers/mtd/mtd-uclass.c Also, make ARCH_UNIPHIER select DM_MTD because all the defconfig of this platform enables NAND_DENALI_DT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-02-01ARM: uniphier: remove adhoc reset deassertion for the NAND controllerMasahiro Yamada
Now that the reset controlling of the Denali NAND driver (denali_dt.c) works for this platform, remove the adhoc reset deassert code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES based on DT compatibleMasahiro Yamada
Currently, the denali NAND driver in U-Boot configures the SPARE_AREA_SKIP_BYTES based on the CONFIG option. Recently, Linux kernel merged a patch that associates the proper value for this register with the DT compatible string. Do likewise in U-Boot too. The denali_spl.c still uses CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01mtd: rawnand: denali_dt: insert udelay() after reset deassertMasahiro Yamada
When the reset signal is de-asserted, the HW-controlled bootstrap starts running unless it is disabled in the SoC integration. It issues some commands to detect a NAND chip, and sets up registers automatically. Until this process finishes, software should avoid any register access. Without this delay function, some of UniPhier boards hangs up while executing nand_scan_ident(). (denali_read_byte() is blocked) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01mtd: rawnand: denali: Do not reset the block before booting the kernelMarek Vasut
The Denali NAND driver in mainline Linux currently cannot deassert the reset. The upcoming Linux 5.6 will support the reset controlling, and also set up SPARE_AREA_SKIP_BYTES correctly. So, the Denali driver in the future kernel will work without relying on any bootloader or firmware. However, we still need to take care of stable kernel versions for a while. U-boot should not assert the reset of this controller. Fixes: ed784ac3822b ("mtd: rawnand: denali: add reset handling") Signed-off-by: Marek Vasut <marex@denx.de> [yamada.masahiro: reword the commit description] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-01mtd: rawnand: denali_dt: make the core clock optionalMasahiro Yamada
The "nand_x" and "ecc" clocks are currently optional. Make the core clock optional in the same way. This will allow platforms with no clock driver support to use this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Marek Vasut <marex@denx.de> # On SoCFPGA Arria V
2020-02-01mtd: rawnand: denali-spl: Add missing hardware init on SoCFPGAMarek Vasut
On Altera SoCFPGA, upon either cold-boot or power-on reset, the Denali NAND IP is initialized by the BootROM ; upon warm-reset, the Denali NAND IP is NOT initialized by BootROM. In fact, upon warm-reset, the SoCFPGA BootROM checks whether the SPL image in on-chip RAM is valid and if so, completely skips re-loading the SPL from the boot media. This does sometimes lead to problems where the software left the boot media in inconsistent state before warm-reset, and because the BootROM does not reset the boot media, the boot media is left in this inconsistent state, often until another component attempts to access the boot media and fails with an difficult to debug failure. To mitigate this problem, the SPL on Altera SoCFPGA always resets all the IPs on the SoC early on boot. This results in a couple of register values, pre-programmed by the BootROM, to be lost during this reset. To restore correct operation of the IP on SoCFPGA, these values must be programmed back into the controller by the driver. Note that on other SoCs which do not use the HW-controlled bootstrap, more registers may have to be programmed. This also aligns the SPL behavior with the full Denali NAND driver, which sets these values in denali_hw_init(). Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-30Merge branch '2020-01-30-master-imports'Tom Rini
- Assorted minor fixes - Revert 6dcb8ba4 from upstream libfdt to restore boot-time speed on many platforms.
2020-01-30Remove redundant YYLOC global declarationPeter Robinson
Same as the upstream fix for building dtc with gcc 10. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2020-01-30Makefile: Fix the location of the migration fileFabio Estevam
Since commit e1910d93b890 ("doc: driver-model: Convert MIGRATION.txt to reST") MIGRATION.txt has been converted to migration.rst, so update the Makefile references accordingly. Fixes: e1910d93b890 ("doc: driver-model: Convert MIGRATION.txt to reST") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-01-30tools: buildman: fix typoFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-30net: fix typoFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
2020-01-30MAINTAINERS: board: hisi: poplar: update emailJorge Ramirez-Ortiz
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
generated by cgit (git 2.34.1) at 2024-12-29 02:55:17 +0000