summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-18video: mxsfb: enable setting PIXDATA on negative edgeGiulio Benetti
DOTCLK signal can now be flipped by writing its bitmask on vdctrl0 register. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18video: mxsfb: enable setting VSYNC negative polarityGiulio Benetti
VSYNC signal can now be flipped by writing its bitmask on vdctrl0 register. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18video: mxsfb: enable setting HSYNC negative polarityGiulio Benetti
HSYNC signal can now be flipped according to display_flags bitmaks by writing its bitmask on vdctrl0 register. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18video: mxsfb: refactor for using display_timingsGiulio Benetti
struct display_timings provides more informations such clock and DE polarity, so let's refactor the code to use struct display_timings instead of struct ctfb_res_modes, so we'll become able to get clock and DE polarity settings and set register according to them in the next patch. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18video: mxsfb: add support for i.MXRTGiulio Benetti
Add support for i.MXRT by adding CONFIG_IMXRT in register structure and adding .compatible = "fsl,imxrt-lcdif". Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18video: mxsfb: add support for DM CLKGiulio Benetti
Allow using DM CLK instead of mxs_set_lcdclk() so we can avoid to implement a special function to set lcd clock on i.MXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18sunxi: display: use common video_ctfb_mode_to_display_timing()Giulio Benetti
Since video_ctfb_mode_to_display_timing() has been implemented by moving sunxi_ctfb_mode_to_display_timing() to video_modes.c and it's meant to be used by other video subsystem, let's use it instead of local sunxi_ctfb_mode_to_display_timing(). Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18videomodes: add helper function to convert from ctfb to display_timingGiulio Benetti
This function converts from "struct ctf_res_modes" to "struct display_timing". Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18clk: imx: clk-imxrt1050: add set_parent() callbackGiulio Benetti
Need to add set_parent() callback to allow dts assigned-clock-parents to work so let's add it accordingly. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-04-18clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPLGiulio Benetti
mxsfb needs PLL5 as source, so let's setup it at its default frequency specified in RM(650Mhz). Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18clk: imx: clk-imxrt1050: fix typo in clock name "video:"Giulio Benetti
"video:" must be "video", ":" is a typo. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18clk: imx: pllv3: add enable_bitGiulio Benetti
pllv3 PLLs have powerdown/up bits but enable bits too. Specifically "enable bit" enable the pll output, so when dis/enabling pll by setting/clearing power_bit we must also set/clear enable_bit. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-17colibri_imx6: enable relocation of fdt and initrdIgor Opaniuk
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri-imx6ull: enable relocation of fdt and initrdIgor Opaniuk
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17apalis_imx6: enable relocation of fdt and initrdIgor Opaniuk
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri_imx7: enable relocation of fdt and initrdIgor Opaniuk
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17colibri_vf: enable relocation of fdt and initrdIgor Opaniuk
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17verdin-imx8mm: add nfsboot wrapper to envIgor Opaniuk
Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-17imx8mm_evk: adjust dram size in case bl32 is usedIgor Opaniuk
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory"). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-17verdin-imx8mm: adjust dram size in case bl32 is usedIgor Opaniuk
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory"). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-17imx8qxp_mek: Start with USDHC2 unpoweredFabio Estevam
After triggering a "reboot" command in Linux the following hang in SPL is observed: U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300) Normal Boot WDT: Not found! Trying to boot from MMC2_2 spl: mmc init failed with error: -70 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### This error happens because the CMD_ERR bit is set in the IRQ status register after booting from Linux. To ensure a fresh start, force the VMMC supply to get unpowered first. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17board: tqc: tqma6_mba6: switch to device modelMichael Krummsdorf
Ethernet, usdhc2 and i2c1 interfaces are probed by dm drivers. Therefor init functions in board file are not necessary. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17board: tqc: tqma6: hw init code disabled for device modelMichael Krummsdorf
Keep code for non-dm configuration of baseboard WRU4. It cannot be upgraded to device model as we have no suitable device tree for it. These changes were not run-tested on WRU4, only compile-tested. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17configs: tqma6x_mba6x: update default configs for device modelMichael Krummsdorf
Fixes compilation for WRU4 board. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17board: tqc: tqma6: mba6: apply default Kconfig for device modelMichael Krummsdorf
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17arch: arm: tqma6: apply default Kconfig for device modelMichael Krummsdorf
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboardMichael Krummsdorf
The device trees for TQMa6x SOM support variations in - CPU type: imx6dl- or imx6q- - MBa6 I2C bus access: -mba6a (i2c1) or -mba6b (i2c3) (plus the respective common/module include trees) - USBH1 is directly connected to a hub - USBOTG is connected to a separate connector and can act as host/device or full OTG port. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17tqma6: resurrect support by supplying correct SYS_TEXT_BASEMarkus Niebel
reason: SYS_TEXT_BASE was moved to Kconfig. Give reasonable defaults in board specific Kconfig. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17arm: imx6: configure NoC on i.MX6DQPBernhard Messerklinger
The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Co-developed-by: Filip Brozović <fbrozovic@gmail.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-04-17mx6ulz_14x14_evk: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx6ulz-evk board does not have networking support, explicitly disable networking to avoid the board removal. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-04-17mx6ullevk: Enable Ethernet supportFabio Estevam
Add Ethernet support using DM_ETH. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Remove FEC related board codeFabio Estevam
mx6ul_evk uses DM_ETH, so there is no need to have board code to setup the FEC IOMUX and to register the network ports via the old board_eth_init() method. Remove these FEC related pieces of code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Move CONFIG_FEC_MXC to defconfigFabio Estevam
CONFIG_FEC_MXC is supported in Kconfig, so it is preferred to move it to defconfig file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx7ulp: Only enable LDO if it is not already enabledFabio Estevam
LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang. Avoid this problem by only enabling LDO mode if it is initially disabled. Reported-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx7ulp: Remove duplicated definitionsFabio Estevam
These PMC0 definitions are already defined in the beginning of the file, so remove the duplication. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-16Merge tag 'arc-fixes-for-2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc This is pretty minor set of changes mostly touching HSDK board: * Enable on-chip reset controller on HSDK * Add possibility to turn-on & off L2$ on more recent ARC HS processors. * AXI tunnel clock calculation on HSDK
2020-04-16Merge tag 'efi-2020-07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc1 This pull request * provides an implementation of UEFI secure booting * fixes a problem with the rsa_mod_exp driver which stops some boards from booting when CONFIG_RSA is enabled which is needed for UEFI secure booting * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled * fixes some function comments
2020-04-16ARC: HSDK: CGU: fix tunnel clock calculationEugeniy Paltsev
We set wrong tunnel PLL frequency when we request 125MHz tunnel clock. Fix that. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: HSDK: Enable on-chip reset controllerEugeniy Paltsev
As the driver of on-chip reset controller became available we are ready to enable it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: mark IOC helper functions as inlined_cachefuncEugeniy Paltsev
Force inlining of IOC related functions used in other cache functions. This is preventive change. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: add support for SL$ disableEugeniy Paltsev
Since version 3.0 ARC HS supports SL$ (L2 system level cache) disable. So add support for SL$ disable/enable to code. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16Merge tag 'dm-pull-10apr20-take2' of git://git.denx.de/u-boot-dmTom Rini
Functions for reading indexed values from device tree Enhancements to 'dm' command Log test enhancements and syslog driver DM change to read parent ofdata before children Minor fixes
2020-04-16dm: core: Read parent ofdata before childrenSimon Glass
At present a device can read its ofdata before its parent has done the same. This can cause problems in the case where the parent has a 'ranges' property, thus affecting the operation of dev_read_addr(), for example. We already probe parent devices before children so it does not seem to be a large step to do the same with ofdata. Make the change and update the documentation in this area. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-16test: fdtdec: test fdtdec_set_carveout()Laurentiu Tudor
Add a new test for fdtdec_set_carveout(). Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Drop blank line at EFO: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-16fdtdec: support multiple phandles in memory carveoutLaurentiu Tudor
fdtdec_set_carveout() is limited to only one phandle. Fix this limitation by adding support for multiple phandles. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: core: remove the duplicated function dm_ofnode_pre_relocPatrick Delaunay
The content dm_ofnode_pre_reloc() is identical with ofnode_pre_reloc() defined in drivers/core/ofnode.c and used only three times: - drivers/core/lists.c:lists_bind_fdt() - drivers/clk/at91/pmc.c::at91_clk_sub_device_bind - drivers/clk/altera/clk-arria10.c::socfpga_a10_clk_bind So this function dm_ofnode_pre_reloc can be removed and replaced by these function calls by ofnode_pre_reloc(). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: core: refactor functions reading an u32 from dtDario Binacchi
Now reading a 32 bit value from a device-tree property can be expressed as reading the first element of an array with a single value. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: core: support reading a single indexed u32 valueDario Binacchi
The patch adds helper functions to allow reading a single indexed u32 value from a device-tree property containing multiple u32 values, that is an array of integers. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: test: add test case for dev_read_u64 functionDario Binacchi
Add test case to cover dev_read_u64 and dev_read_u64_default functions. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: core: Add a way to skip powering down power domainsSimon Glass
When removing a device the power domains it uses are generally powered off. But when we are trying to unbind all devices (e.g. for running tests) we don't want to probe a device in the 'remove' path. Add a new flag to skip this power-down step. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-10 13:28:27 +0000