summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-12configs: k2g_evm: Remove PMMC loading environment commandsAndrew F. Davis
The PMMC firmware should be bundled with the FIT image for HS devices, remove the steps that load and install this firmware outside of FIT. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-12ARM: k2g: Add FIT image handler for PMMC firmwareAndrew F. Davis
The PMMC firmware should be bundled into a FIT image on HS devices to allow authentication/decryption, add a handler to process this PMMC firmware. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-12image: Add TI PMMC image typeAndrew F. Davis
Add a new image type representing TI Power Management Micro-Controller (PMMC) Firmware image type. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-12examples: add fallback memcpyRob Clark
Solves build issue: Building current source for 134 boards (12 threads, 1 job per thread) arm: + lsxhl +examples/api/vsprintf.o: In function `string16': +lib/vsprintf.c:278: undefined reference to `memcpy' +examples/api/uuid.o: In function `uuid_bin_to_str': +lib/uuid.c:197: undefined reference to `memcpy' +lib/uuid.c:199: undefined reference to `memcpy' +make[3]: *** [examples/api/demo] Error 1 +make[2]: *** [examples/api] Error 2 +make[1]: *** [examples] Error 2 +make: *** [sub-make] Error 2 133 0 1 /134 sheevaplug Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-12vsprintf.c: add GUID printingRob Clark
This works (roughly) the same way as linux's, but we currently always print lower-case (ie. we just keep %pUB and %pUL for compat with linux), mostly just because that is what uuid_bin_to_str() supports. %pUb: 01020304-0506-0708-090a-0b0c0d0e0f10 %pUl: 04030201-0605-0807-090a-0b0c0d0e0f10 It will be used by a later efi_loader paths for efi variables and for device-path-to-text protocol, and also quite useful for debug prints of protocol GUIDs. Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-12vsprintf.c: add UTF-16 string (%ls) supportRob Clark
This is convenient for efi_loader which deals a lot with UTF-16. Only enabled with CC_SHORT_WCHAR, leaving room to add a UTF-32 version when CC_SHORT_WCHAR is not enabled. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-12lib: add some utf16 handling helpersRob Clark
We'll eventually want these in a few places in efi_loader, and also vsprintf. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-12kbuild: Enable -fshort-wcharRob Clark
EFI_LOADER really wants UTF-16 strings (ie. %ls and L"string" are 16bit chars instead of 32bit chars). But rather than enabling -fshort-wchar conditionally if EFI_LOADER is enabled, it was deemed preferrable to globally switch. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-09-12Travis-CI: Update PATHTom Rini
We now can no longer re-use the provided path and need to give the full PATH we want used now. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-12Merge git://git.denx.de/u-boot-dmTom Rini
2017-09-11dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_testPatrice Chotard
This allows to scan the DT including all "clocks" node's sub-nodes in which fixed-clock are defined. All fixed-clock should be defined inside a clocks node which collect all external oscillators. Until now, all clocks sub-nodes can't be binded except if the "simple-bus" compatible string is added which is a hack. Update test.dts by moving clk_fixed node inside clocks. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11dm: core: add clocks node scanPatrice Chotard
Currently, all fixed-clock declared in "clocks" node in device tree can be binded by clk_fixed_rate.c driver only if each of them have the "simple-bus" compatible string. This constraint has been invoked here [1]. This patch offers a solution to avoid adding "simple-bus" compatible string to nodes that are not busses. [1] https://patchwork.ozlabs.org/patch/558837/ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11patman: add support for omitting bouncing addressesChris Packham
Add support for reading a list of bouncing addresses from a in-tree file (doc/bounces) and from the ~/.patman config file. These addresses are stripped from the Cc list. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com <mailto:philipp.tomsich@theobroma-systems.com>>
2017-09-11moveconfig: Use fd.write() instead of print >>Simon Glass
Adjust this code so that it can work with Python 2 and 3. Fixes: d73fcb1 (moveconfig: Support building a simple config database) Reported-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-09-11dm: core: Add ofnode_for_each_subnode()Simon Glass
Add a convenience macro to iterate over subnodes of a node. Make use of this where appropriate in the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-09-11genconfig.py: Print defconfig next to warningsSimon Glass
At present we sometimes see warnings of the form: /tmp/tmpMA89kB:36: warning: overriding the value of CMD_SPL. Old value: "y", new value: "y". This is not very useful as it does not show whch defconfig file it relates to. Update the tool to show this. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-09-11dm: core: Show driver name with 'dm tree'Simon Glass
It is often useful to see which driver was actually selected for each device. Add a new 'Driver' column to provide this information. Sample output: Class Probed Driver Name ---------------------------------------- root [ + ] root_drive root_driver keyboard [ + ] i8042_kbd |-- keyboard serial [ + ] ns16550_se |-- serial rtc [ ] rtc_mc1468 |-- rtc timer [ + ] tsc_timer |-- tsc-timer syscon [ + ] ich6_pinct |-- pch_pinctrl pci [ + ] pci_x86 |-- pci northbridge [ + ] bd82x6x_no | |-- northbridge@0,0 video [ + ] bd82x6x_vi | |-- gma@2,0 vidconsole0 [ + ] vidconsole | | `-- gma@2,0.vidconsole0 ... Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-11dm: core: Drop use of strlcpy()Simon Glass
We can use printf() to limit the string width. Adjust the code to do this instead of using strlcpy() which is a bit clumbsy. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-11sandbox: Convert SANDBOX_BITS_PER_LONG to KconfigBin Meng
Convert SANDBOX_BITS_PER_LONG to Kconfig and assign it a correct number depending on which host we are going to build and run. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11sandbox: Introduce Kconfig option for 32/64 bit hostBin Meng
It seems most of the time we are building and running sandbox on 64-bit host. But we do support 32-bit host as well. Introduce Kconfig option for this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11blk: dm: make blk_create_device() take a number of block instead of a sizeJean-Jacques Hiblot
There is an overflow problem when taking the size instead of the number of blocks in blk_create_device(). This results in a wrong device size: the device apparent size is its real size modulo 4GB. Using the number of blocks instead of the device size fixes the problem and is more coherent with the internals of the block layer. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11misc: Kconfig: Add SPL_I2C_EEPROM optionWenyou Yang
This option is an SPL-variant of the I2C_EEPROM option to enable the driver for generic I2C-attached EEPROMs for SPL. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11board: sama5d4_xplained: Set mac address from eepromWenyou Yang
Add the code to set the ethernet mac address from eeprom by using the common code from the common folder. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11board: sama5d2_xplained: Replace code to set mac addressWenyou Yang
Replace the code to set the ethernet mac address with the code from the common folder. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11board: atmel: Create board/$(VENDOR)/common folderWenyou Yang
Create board/$(VENDOR)/common folder to accommodate the common code shared by other atmel boards, now put the code to set ethernet mac address from eeprom, which uses the i2c eeprom driver. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11env: ti: boot: Select dtb name for X15 revCLokesh Vutla
Select dtb name for am57xx BeagleBoard-X15 revC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11board: ti: am57xx: Add dt support for BeagleBoard-X15 revCLokesh Vutla
Add support for selecting proper dtb for am57xx BeagleBoard X15 revC u-boot from FIT Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11board: ti: am571x: Add 666MHz support for AM571x IDKSteve Kipisz
AM571x supports DDR running at 666MHz. Right now it is clocked at 532MHz which is lower than what is supported. In order to have maximum performance on AM571-IDK, switch DDR to 666MHz. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11board: ti: dra76: Add dt supportLokesh Vutla
Add support for selecting proper dtb for dra76x u-boot from FIT. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11arm: dts: Add u-boot specific compatiblesLokesh Vutla
Separate out u-boot specific compatibles from dts files. This will help in syncing dts files in future. Also these will get deleted eventually once respective drivers are capable of handling Linux dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11arm: dts: dra7: sync DT with latest LinuxLokesh Vutla
Sync all dra7* specific dts files with the upstream kernel including changes queued for 4.14 https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.14/dt-v3 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11env: ti: boot: Select dtb name for dra76Lokesh Vutla
Select dtb name for dra76-evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11board: ti: dra76-evm: Add support for powering on mmc ldoLokesh Vutla
ldo4 is used to poweron mmc on dra76-evm. Enable it. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11board: ti: dra76-evm: Add the pinmux dataLokesh Vutla
Adding pinmux and IODELAY data for dra76-evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11board: ti: dra76-evm: Add DDR dataLokesh Vutla
dra76-evm has the ddr parts connectedi running at 666MHz: EMIF1: MT41K512M16HA-125 AIT:A x 2 EMIF2: MT41K512M8RH-125-AAT:E x 4 Add support for configuring the above DDR parts. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11board: ti: dra76-evm: Add the pmic dataKeerthy
dra76-evm uses lp8736 and tps65917 pmic for powering on various peripherals. Add data for these pmics and register for dra76-evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11board: ti: dra76-evm: Add epprom supportLokesh Vutla
The dra76-evm is a board based on TI's DRA76 processor Add eeprom support Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11arm: dra76: Add support for ES1.0 detectionPraneeth Bajjuri
dra76 family is a high-performance, infotainment application device, based on OMAP architecture on a 28-nm technology. This contains most of the subsystems, peripherals that are available on dra74, dra72 family. This SoC mainly features Subsystems: - 2 x Cortex-A15 with max speed of 1.8GHz - 2 X DSP - 2 X Cortex-M4 IPU - ISS - CAL - DSS - VPE - VIP Connectivity peripherals: - 1 USB3.0 and 3 USB2.0 subsystems - 1 x SATA - 2 x PCI Express Gen2 - 3-port Gigabit ethernet switch - 2 x CAN - MCAN Adding CPU detection support for the dra76 ES1.0 soc and update prcm, control module, dplls data. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11arm: dra7: Kconfig: Select LP87565 related configsLokesh Vutla
LP87565 is present on dra76-evm. Select it for TARGET_DRA7XX_EVM. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11palmas: Add support for powering different ldosLokesh Vutla
It is not necessary that ldo1 is used to power on mmc. So, add support for passing ldo registers for powering on mmc. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11arm: omap5+: Add board specific ldo poweringLokesh Vutla
It is not necessary all omap5+ based uses the same PMIC to poweron mmc. So add support for enabling mmc based on board. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2017-09-11Prepare v2017.09Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-11MAINTAINERS: board: qcom: db410c: Maintainer changedJorge Ramirez-Ortiz
Replacing original author Mateusz Kulikowski <mateusz.kulikowski@gmail.com> as db410c maintainer Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-09-11armv8: fsl-layerscape: Add back L3 flushing for all exception levelsYork Sun
CCN-504 HPF registers were believed to be accessible only from EL3. However, recent tests proved otherwise. Remove checking for exception level to re-enable L3 cache flushing for all levels. Signed-off-by: York Sun <york.sun@nxp.com> Tested-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-09-11armv8: ls1088a: Enable PCIe in defconfigsHou Zhiqiang
Enabled PCIe support and PCI command feature. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: ls1088a: add PCIe dts nodeHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: ls1088a: fix the MMU table for pcie config spaceHou Zhiqiang
The pcie config space of ls1088a is different from ls2080a. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: fsl-layerscape: Fix MC reserved memory calculationYork Sun
In case high region memory doesn't have enough space for Management Complex (MC), the return value should indicate a failure so the caller can handle it accordingly. Signed-off-by: York Sun <york.sun@nxp.com> Reported-by: Ebony Zhu <ebony.zhu@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-26 12:14:59 +0000