summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-04-27Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-04-26ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQKumar Gala
The MPC83xx SERDES control is different from the other FSL PPC chips. For now lets split it out so we can standardize on interfaces for determining of a device on SERDES is configured. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
2010-04-26mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flashLan Chunhe
Signed-off-by: Lan Chunhe <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2685xx: clean up the io_sel for PCI express of P1022Dave Liu
clean up the wrong io_sel for PCI express according to latest manual. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2685xx/socrates: Remove NFS support to fit image size.Detlev Zundel
This fixes an overflow during the link phase. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2685xx: Fix compile warningKumar Gala
cpu.c: In function 'checkcpu': cpu.c:47: warning: unused variable 'gur' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2685xx: Convert cpu_init_f code to use out_be32 for LBC registersKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26fsl_sata: Move the snoop bit to another placeDave Liu
For P1022 SATA host controller, the data snoop bit of DW3 in PRDT is moved to bit28. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26fsl_sata: Add the workaround for errata SATA-A001Dave Liu
After power on, the SATA host controller of P1022 Rev1 is configured in legacy mode instead of the expected enterprise mode. Software needs to clear bit[28] of HControl register to change to enterprise mode after bringing the host offline. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26fsl-ddr: Add extra cycle to turnaround timesDave Liu
Add an extra cycle turnaround time to read->write to ensure stability at high DDR frequencies. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26fsl-ddr: add the macro for Rtt_Nom definitionDave Liu
add the macro definition for Rtt_Nom termination value for DDR3 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26ppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 definesKumar Gala
Added some needed fines and some misc additional defines used by p4080 initialization. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26ppc/p4080: Extend the GUTS memory mapDave Liu
Extend pin control and clock control to GUTS memory map Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26ppc/p4080: Fix synchronous frequency calculationsSrikanth Srinivasan
When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-26ppc/85xx: Fixup PCI nodes for P1_P2_RDBKumar Gala
While we had ft_pci_board_setup it wasn't being called by ft_board_setup. Fix that so we actually update the device tree PCI nodes on P1_P2_RDB boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-24nios2: add nios2-generic boardThomas Chou
This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: fix no flash, add nand and mmc init in board.cThomas Chou
This patch fixes error when CONFIG_SYS_NO_FLASH. And adds nand flash and mmc initialization, which should go before env initialization. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: consolidate reset initializationThomas Chou
Global interrupt should be disabled from the beginning. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24altera_jtag_uart: bypass when no jtag connectionThomas Chou
This patch adds an option to bypass output waiting when there is no jtag connection. This allows the jtag uart work similar to a serial uart, ie, boot even without connection. This option is enabled with CONFIG_ALTERA_JTAG_UART_BYPASS Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: add dma_alloc_coherentThomas Chou
This function return cache-line aligned allocation which is mapped to uncached io region. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: add 64 bits swab supportThomas Chou
This patch adds 64 bits swab support. Most 32 bits processors use this. We need 64 bits swab for UBI. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: add altera cf resetThomas Chou
This patch toggles power to reset the cf card. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: allow link script overriding from boardsThomas Chou
This patch allow boards to override the default link script. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24mpc5121: pdm360ng: add coprocessor POSTAnatolij Gustschin
Adds coprocessor communication POST code Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc5121: add common post_word_load/store codeAnatolij Gustschin
Add common post_word_load/post_word_store routines for all mpc5121 boards. pdm360ng board POST support added by subsequent patch needs them. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc5121: add support for PDM360NG boardAnatolij Gustschin
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc5121: determine RAM size using get_ram_size()Anatolij Gustschin
Configure CONFIG_SYS_MAX_RAM_SIZE address range in DDR Local Access Window and determine the RAM size. Fix DDR LAW afterwards using detected RAM size. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc512x: make MEM IO Control configuration a board config optionAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc5121: add PSC serial communication routinesAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24mpc512x: add multi serial PSC supportAnatolij Gustschin
Extend mpc512x serial driver to support multiple PSC ports. Subsequent patches for PDM360NG board support make use of this functionality by defining CONFIG_SERIAL_MULTI in the board config file. Additionally the used PSC devices are specified by defining e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6. Support for PSC devices other than 1, 3, 4 and 6 is not added by this patch because these aren't used currently. In the future it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c. Additionally you have to add code for registering added devices in serial_initialize() in common/serial.c. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24serial: struct serial_device: add uninit() entry for driversAnatolij Gustschin
Subsequent patch extends mpc512x serial driver to support multiple PSC ports. The driver will provide an uninit() function to stop the serial controller and to disable the controller's clock. Adding uninit() entry to struct serial_device allows disabling the serial controller after usage of a stdio serial device. This patch adds uninit() entry to the struct serial_device and fixes initialization of this structure in the code accordingly. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24Merge branch 'master' of git://git.denx.de/u-boot-mmcWolfgang Denk
2010-04-24Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-04-24Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk
2010-04-24Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
2010-04-23ppc/85xx: PIO Support for FSL eSDHC Controller DriverDipen Dudhat
On some Freescale SoC Internal DMA of eSDHC controller has bug. So PIO Mode has been introduced to do data transfer using CPU. Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
2010-04-21Move arch/ppc to arch/powerpcStefan Roese
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
2010-04-19ppc4xx: TLB init file cleanupStefan Roese
This patch adds new macros, with frequently used combinations of the 4xx TLB access control and storage attibutes. Additionally the 4xx init.S files are updated to make use of these new macros. Resulting in easier to read TLB definitions. Additionally some init.S files are updated to use the mmu header for the TLB defines, instead of defining their own macros. Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-19fsl_i2c: Added a callpoint for i2c_board_late_initRichard Retanubun
This patch adds a callpoint in i2c_init that allows board specific i2c board initialization (typically for i2c bus reset) that is called after i2c_init operations, allowing the i2c_board_late_init function to use the pre-configured i2c bus speed and slave address.
2010-04-16nios2: Move individual board linker scripts to common script in cpu tree.Scott McNutt
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-16microblaze: Consolidate cache codeMichal Simek
Merge cpu and lib cache code. Flush cache before disabling. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Flush cache before jumping to kernelMichal Simek
There is used max cache size on system which doesn't define cache size. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Support system with WB cacheMichal Simek
WB cache use different instruction that WT cache but the major code is that same. That means that wdc.flush on system with WT cache do the same thing as before. You need newer toolchain with wdc.flush support. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Change initialization sequenceMichal Simek
env_relocation should be called first. Added stdio_init too. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Change cache report messagesMichal Simek
It is more accurate to show that caches are OFF instead of FAIL. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Fix interrupt handler codeMichal Simek
It is better to read ivr and react on it than do long parsing from two regs. Interrupt controller returs actual irq number. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Move FSL initialization to board.cMichal Simek
Move FSL out of interrupt controller. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-16microblaze: Move timer initialization to board.cMichal Simek
I would like to handle case where system doesn't contain intc that's why I need timer initialization out of intc code. Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit (git 2.34.1) at 2024-12-29 20:25:33 +0000