summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-18sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmissionLukasz Majewski
This change enables support for MC34708 PMIC in sandbox. Now we can emulate the I2C transfers larger than 1 byte. Notable changes for this driver: - From now on the register number is not equal to index in the buffer, which emulates the PMIC registers - The PMIC register's pool is now dynamically allocated up till 64 regs * 3 bytes each = 192 B Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: Rewrite the pmic command to not only work with single byte transmissionLukasz Majewski
Up till now it was only possible to use 'pmic' command with a single byte transmission. The pmic_read|write functions has been replaced with ones, which don't need the transmission length as a parameter. Due to that it is possible now to read data from PMICs transmitting more data than 1 byte at once (e.g. mc34708) Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: dm: Add support for MC34708 for PMIC DMLukasz Majewski
This patch adds support for MC34708 PMIC, to be used with driver model (DM). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes ↵Lukasz Majewski
transmissions This commit provides support for transmissions larger than 1 byte for PMIC devices used with DM (e.g. MC34708 from NXP). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: Add support for setting transmission length in uclass private dataLukasz Majewski
The struct uc_pmic_priv's trans_len field stores the number of types to be transmitted per PMIC transfer. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: fsl: Define number of bytes sent at once by MC34708 PMICLukasz Majewski
This patch adds definition of the number of bytes sent at once by the MC34708 PMIC. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: fsl: Provide some more definitions for MC34708 PMICLukasz Majewski
This commit adds some more defines for MC34708 PMIC. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18configs: imx6dl-mamoj: Enable HABJagan Teki
Enable Secure boot(HAB) for BTicino Mamoj board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18configs: imx6dl-mamoj: Add Falcon mode supportJagan Teki
Add Falcon mode support to boot Linux directly after SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18configs: imx6dl-mamoj: Add DFU supportJagan Teki
Add DFU support for BTicino Mamoj board and update the same steps in README. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18configs: imx6dl_mamoj: Enable fastboot and umsJagan Teki
Enable fastboot and ums for host to interact eMMC on Mamoj board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6DL: mamoj: Add PFUZE100 supportJagan Teki
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support for it through DM_PMIC dt definition. pmic log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======== => pmic list | Name | Parent name | Parent uclass @ seq | pfuze100@08 | i2c@021f8000 | i2c @ 3 => pmic dev pfuze100@08 dev: 0 @ pfuze100@08 => pmic dump Dump pmic: pfuze100@08 registers 0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81 0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00 0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b 0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08 0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10 0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6DL: mamoj: Add I2C supportJagan Teki
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support through DM_I2C with dt definition. i2c log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======= => i2c bus Bus 2: i2c@021a8000 Bus 3: i2c@021f8000 => i2c dev 2 Setting bus to 2 => i2c speed 400000 Setting bus speed to 400000 Hz => i2c probe Valid chip addresses: 20 51 53 => i2c md 53 0xff 00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ => i2c md 51 0xff 00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 ..@P.CFRB......S => i2c dev 3 Setting bus to 3 => i2c speed 100000 Setting bus speed to 100000 Hz => i2c probe Valid chip addresses: 08 40 48 4B => i2c md 08 0xff 00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6: board: Add BTicino i.MX6DL Mamoj initial supportJagan Teki
Add initial support for i.MX6DL BTicino Mamoj board. Mamoh board added: - SPL - SPL_DM - SPL_OF_CONTROL - DM for U-Boot proper - OF_CONTROL for U-Boot proper - eMMC - FEC - Boot from eMMC - Boot from USB SDP Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: i.MX6: dts: Build dtb based on SOC typeJagan Teki
Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: imx6ul-isiot: Move usdhc2 into dtsiJagan Teki
Move usdhc2 node along with pinctrl to imx6ul-isiot.dts from imx6ul-isiot-emmc.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-17imx6: sabrelite: update defconfig to use distro defaultsGuillaume GARDET
Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on sabrelite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com>
2018-05-17imx6: Convert sabrelite and nitrogen6x boards to distro boot supportGuillaume GARDET
Boot tested on sabrelite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Denis Pynkin <denis.pynkin@collabora.com>
2018-05-17dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrlLukasz Majewski
The SION pin must be set for proper operation of I2C when DM is enabled. When legacy I2C is used, this bit is set implicitly in the u-boot code: arch/arm/include/asm/arch-mx5/iomux-mx53.h:92: MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL), The Linux kernel uses similar approach with: arch/arm/boot/dts/imx53-tqma53.dtsi:182: MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 After applying this patch it is possible to have the I2C working with DM on imx53 devices: MX53_PAD_KEY_ROW3__I2C2_SDA (0x1ee | IMX_PAD_SION) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-17dts: imx53: Add gpio and i2c nodes to imx53.dtsi fileLukasz Majewski
Those DTS nodes has been ported from Linux kernel (v4.16) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-17ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfigSebastian Reichel
CONFIG_ENV_IS_IN_MMC must be declared in defconfig to properly support "env save". Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17mx6: remove duplicated BOUNCE_BUFFER definesPeter Robinson
The mx6_common.h file already defines BOUNCE_BUFFER so no need to definit it again in specific configs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2018-05-17mx6: Select CONFIG_MP with MX6_SMPPeter Robinson
It makes sense to select the MP multi processor option at the same time we select the other SMP options needed for SMP capable i.MX6 SoCs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx7: remove empty ifndef statementPeter Robinson
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx6 common: remove dangling commentPeter Robinson
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.Magnus Lilja
Also remove the #ifdef's from clock.h since the Kconfig values defaults the to old default values in clock.h. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.Magnus Lilja
Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce necessary Kconfig changes as well. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17board: ge: bx50v3: remove redundant targetsIan Ray
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3. The boards are identified automatically at runtime. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: configure video arguments using VPDIan Ray
Configure video arguments at run-time instead of at compile-time. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: use VPD instead of compile-time checksIan Ray
B{46}50v3s have an internal LCD that needs to be configured, in comparison with B850v3 which has only external displays. Use VPD instead of `CONFIG_TARGET_GE_B{4,6,8}50V3' compile-time checks to correct initialize video based on the monitor type. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: detect the monitor type by reading VPD earlierNandor Han
Move the VPD reading earlier in order to establish the monitor type as soon as possible. The configuration of the specific environment variables needs to be done later after the environment is configured. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: fix display support for b{46}50v3Ian Ray
Enable Video PLL to fix non-working display support for Bx50v3 internal displays. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: unify two switch statementsNandor Han
Simplify process_vpd() by unifying the switch statements handling product specific configurations. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: rename detect_baseboard functionIan Ray
The detect_baseboard() function actually determines whether there is an internal LCD panel or not. Rename for clarity. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: add winbond SPI NOR supportIan Ray
Add winbond SPI NOR support, which is being used by newer hardware. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-16ARM: re-enable MVGBE for edminiv2Chris Packham
This was unintentionally disabled when moving MVGBE to Kconfig. Fixes: commit ed52ea507f12 ("net: add Kconfig for MVGBE") Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-05-15usb: composite convert __set_bit to generic_set_bitBryan O'Donoghue
Compiling the f_mass_storage driver for an x86 target results in a compilation error as set_bit and clear_bit are provided by bitops.h To address that situation we discussed on the list moving to genetic_set_bit() instead. Doing a quick grep for similar situations in drivers/usb shows that the composite device is using __set_bit(). This patch switches over to generic_set_bit to maintain consistency between the two gadget drivers. Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de>
2018-05-15usb: f_mass_storage: Fix set_bit and clear_bit usageBryan O'Donoghue
Compiling the f_mass_storage driver for an x86 target results in a compilation error as set_bit and clear_bit are provided by bitops.h Looking at the provenance of the current u-boot code and the git change history in the kernel, it looks like we have a local copy of set_bit and clear_bit as a hold-over from porting the Linux driver into u-boot. These days __set_bit and __clear_bit are optionally provided by an arch and can be used as inputs to generic_bit_set and generic_bit_clear. This patch switches over to generic_set_bit and generic_clear_bit to accommodate. Tested on i.MX WaRP7 and Intel Edison Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de>
2018-05-15nds32: Define PLATFORM__CLEAR_BIT for generic_clear_bit()Bryan O'Donoghue
nds2 bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in nds32 bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Macpaul Lin <macpaul@andestech.com>
2018-05-15nds32: Define PLATFORM__SET_BIT for generic_set_bit()Bryan O'Donoghue
nds32 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in nds32 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Macpaul Lin <macpaul@andestech.com>
2018-05-15nios2: Define PLATFORM__CLEAR_BIT for generic_clear_bit()Bryan O'Donoghue
nios2 bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in nios2 bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Thomas Chou <thomas@wytron.com.tw>
2018-05-15nios2: Define PLATFORM__SET_BIT for generic_set_bit()Bryan O'Donoghue
nios2 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in nios2 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Thomas Chou <thomas@wytron.com.tw>
2018-05-15riscv: Define PLATFORM__CLEAR_BIT for generic_clear_bit()Bryan O'Donoghue
riscv bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in riscv bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Rick Chen <rick@andestech.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-05-15riscv: Define PLATFORM__SET_BIT for generic_set_bit()Bryan O'Donoghue
riscv bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in x86 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Rick Chen <rick@andestech.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-05-15x86: Define PLATFORM__SET_BIT for generic_set_bit()Bryan O'Donoghue
x86 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in x86 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2018-05-15ARM: mvebu: a38x: Add missing SPDX license identfierChris Packham
mv_ddr_build_message.c is generated in Marvell's standalone mv_ddr code. When imported into u-boot we need to add the appropriate SPDX tag and re-format it slightly. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-05-15Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2018-05-15dts: sunxi: add PWM node for sun50iVasily Khoruzhick
Add PWM definition to sun50i-a64.dtsi Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 00:12:46 +0000