summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-02-22SDRAM seems to be working on delta board, though u-boot doesn't start yet.Markus Klotzbücher
2006-02-21Add GIT version information (commid ID) to untagged U-Boot versionsWolfgang Denk
As done in the linux kernel, the U-Boot version (U_BOOT_VERSION) of all unreleased (untagged) U-Boot images will be automatically extended upon compiletime with a part of the GIT commit ID and possibly with "dirty" if uncommited changes are detected. Here an example for the resulting version: "U-Boot 1.1.4-g3457ac18-dirty" The version is now maintained in the toplevel Makefile and the version headers are autogenerated. Patch by Stefan Roese, 9 Feb 2006
2006-02-21Merge with /home/sr/git/u-bootWolfgang Denk
2006-02-20[Patch] Add basic support for the SMMACO4 Board from PanDaCom.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-02-20New board directory and config for the benq delta board (copied fromMarkus Klotzbücher
zylonite). Minor pxa-regs.h update.
2006-02-20Merged and added more pxa-regs.h stuff, especially the GPIO ControlMarkus Klotzbücher
Register Definitions.
2006-02-19Merged sufficient changes to pxa-regs.h in order to make u-boot compile.Markus Klotzbücher
It doesn't run yet.
2006-02-10Reverting pxa-regs.h back to original, because the intel Monahans oneMarkus Klotzbücher
breaks backward compatibility and I don't trust it. Instead, i'll verify and merge the parts I need while porting.
2006-02-10Config updated for compiling the SMC911111 network driverMarkus Klotzbücher
2006-02-10Changed gcc-4.0 global data pointer fix to conform with the fix for this onMarkus Klotzbücher
other platforms (see c75eba3b4140187cd0d9bd8049f5df4c49b6889b)
2006-02-09basic u-boot is working, boots into the command shell.Markus Klotzbücher
2006-02-08Changes:Markus Klotzbücher
* lots of bugfixes in the assembler code * reverted hardware.h back to original * enabled hardware DRAM calibration * GCC-4 fix: modified GLOBAL_DATA_POINTER macro
2006-02-08Convert CPCI750 to use common CFI flash driverStefan Roese
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-07Forgot to add files to zylonite branch.Markus Klotzbücher
2006-02-07This is the first commit for the u-boot zylonite port. The following has beMarkus Klotzbücher
done so far: * created zylonite board dir (based on lubbock) * extended some - but not all pxa sources and headers for Intel Monahans support (CONFIG_CPU_MONAHANS) * created Makefile zylonite target + MAKEALL entry * added some debug nonsense, remove later, grep for mk@tbd Status: compiles (eldk-4.0), and can be started with BDI, but runs forever and doesn't halt at breakpoints. Hmmm...
2006-02-07Various changes to esd HH405 board specific filesStefan Roese
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07Update default environment for INKA4x00 board.Wolfgang Denk
2006-01-29Cleanup U-Boot boot messages on ARM.Wolfgang Denk
To match the U-Boot user interface on ARM platforms to the U-Boot standard (as on PPC platforms), some messages with debug character are removed from the default U-Boot build. Enable DEBUG for lib_arm/board.c to enable debug messages. New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options. Patch by Stefan Roese, 24 Jan 2006
2006-01-18Fix various compiler warnings on ppc4xx builds (ELDK 4.0)Stefan Roese
Patch by Stefan Roese, 18 Jan 2006
2006-01-18Add VGA support (CT69000) to CPCI750 board.Stefan Roese
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file(). Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18PMC405 and CPCI405: Moved configuration of pci resources into config file.Stefan Roese
PMC405 and CPCI2DP: Added firmware download and booting via pci. Patch by Matthias Fuchs, 20 Dec 2005
2006-01-13Fix 28F256J3A support on PM520 boardWolfgang Denk
(without bank-switching only 32 MB can be accessed)
2006-01-11Update CHANGELOG.Wolfgang Denk
2006-01-11Fix mkimage bug with multifile images created on 64 bit systems.Wolfgang Denk
2005-12-29Add support for 28F256J3A flah (=> 64 MB) on PM520 boardWolfgang Denk
2005-12-22Add support for 28F256J3A flash chipsWolfgang Denk
2005-12-19Fix compiler problem with at91rm9200dk board.Wolfgang Denk
Patch by Eugen Bigz, 19 Dec 2005
2005-12-16Merge with /home/sr/git/u-bootWolfgang Denk
2005-12-16MPC5200: Set PCI retry counter to 0 = infinite retry;Wolfgang Denk
The default of 255 is too short for slow devices. Patch by Martin Nykodym, 12 Dec 2005
2005-12-15Changes to Yellowstone & Yosemite 440EP/GR eval boards:Stefan Roese
- Changed GPIO setup to enable another address line in order to address 64M of FLASH. - Added function sdram_tr1_set to auto calculate the tr1 value for the DDR. Patch by Steven Blakeslee, 12 Dec 2005
2005-12-14Merge with /home/m8/git/u-bootWolfgang Denk
2005-12-12(no commit message)Wolfgang Denk
2005-12-06Change port configuration for O2DNT (CODEC1 on PSC1)Marian Balakowicz
2005-12-06Fix DPRAM offset/size for MPC8541/8555.Wolfgang Denk
Simplify TQM85xx Makefile handling.
2005-12-04Fix data overflow (typo?) in rtc/ds1302.cWolfgang Denk
2005-12-04Code cleanup, especially MIPS for GCC 4.xWolfgang Denk
2005-12-01Fix U-Boot compilation for MIPS boards using ELDK 4.0Wolfgang Denk
2005-12-01Merge with /home/sr/git/u-bootWolfgang Denk
2005-12-01Adjust TQM834x PHY addresses for latest hardware revision.Wolfgang Denk
2005-12-01Increase malloc arena on TQM5200 board to 256 kB.Wolfgang Denk
With 64 kb uniform flash sector size the old value of 128 kB was too small.
2005-11-30Fix miiphy global data initialization (problem on 4xx boards when noMarian Balakowicz
ethaddr is assigned). Initialization moved from miiphy_register() to eth_initialize(). Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30Add support for TQM8541/8555 boards, TQM85xx support reworked:Stefan Roese
- Support for TQM8541/8555 boards added. - Complete rework of TQM8540/8560 support. - Common TQM85xx code now supports all current TQM85xx platforms (TQM8540/8541/8555/8560). - DDR SDRAM size detection added. - CAS latency default values can be overwritten by setting "serial#" to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used. If problems are detected with this non default CAS latency, the defualt values will be used instead. - FLASH size detection added. - Moved FCC ethernet driver initialization behind TSEC driver init -> TSEC is first device. Patch by Stefan Roese, 30 Nov 2005
2005-11-29Compile warning fixedStefan Roese
Patch by Stefan Roese, 29 Nov 2005
2005-11-29Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.Stefan Roese
Patch by John Otken, 23 Nov 2005
2005-11-29Minor AMCC 4xx board cleanupsStefan Roese
Patch by Stefan Roese, 27 Nov 2005
2005-11-27Increase IPB and PCI clocks for O2DNT board.Marian Balakowicz
2005-11-27Changed PPC44x startup message (cpu info, speed...) to common style:Stefan Roese
On PPC44x platforms, the startup message generated in "cpu.c" only comprised the ppc type and revision but not additional informations like speed etc. Those speed infos where printed in the board specific code. This new implementation now prints all CPU infos in the common cpu specific code. No board specific code is needed anymore and therefore removed from all current 44x implementations. Patch by Stefan Roese, 27 Nov 2005
2005-11-25Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.hWolfgang Denk
2005-11-25Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.Wolfgang Denk
The COPYING file was extended to make clear that these files can be used in non-GPL code, too.
2005-11-22Add support for Prodrive P3P440 board:Stefan Roese
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c - CFG_FLASH_QUIET_TEST added to use the common CFI driver for bank autodetection Patch by Stefan Roese, 22 Nov 2005
generated by cgit (git 2.34.1) at 2025-01-09 09:12:10 +0000