summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-08rockchip: rk3328: fix syscon id tableKever Yang
syscon id table need a dummy member as NULL ending, or else system will panic while try to match a compatible in this table as a list. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-07ARM: rmobile: Disable CONFIG_ARCH_FIXUP_FDT_MEMORYMarek Vasut
Disable CONFIG_ARCH_FIXUP_FDT_MEMORY to prevent U-Boot from modifying the memory {} nodes in the DT passed to the Linux kernel. The R8A779x DT contains multiple memory {} nodes, while U-Boot only modifies the first one and stuffs all the memory entries into it, which is wrong. Disabling CONFIG_ARCH_FIXUP_FDT_MEMORY is the least intrusive way to fix the issue this close to the release, while the real fix is to extend the fdt_fixup_memory_banks() to handle multiple memory nodes in DT. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-07ARM: rmobile: Fix SD divider settings on Gen3Marek Vasut
On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock must be divided by 4 rather than 2 because a hardware workaround present only in the H3 ES1.0 has been removed from these chips. U-Boot currently only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider to 4 to prevent SD instability. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-07Merge git://git.denx.de/u-boot-netTom Rini
2017-09-07net: fix typosHeinrich Schuchardt
%s/Desriptor/Descriptor/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-09-07armv8: ls1043/ls1046aqds: add support for RGMII_TXIDMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: York Sun <york.sun@nxp.com>
2017-09-07net: nfs: Drop CONFIG_NFS_READ_SIZETom Rini
In the general case, CONFIG_NFS_READ_SIZE is unchanged from the default of 1024. There are in fact no in-tree users that increase this size. Adjust the comment to reflect what could be done in the future in conjunction with CONFIG_IP_DEFRAG. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-09-07net: phy: realtek: fix enabling of the TX-delay for RTL8211FMadalin Bucur
The old logic always enabled the TX-delay when the phy-mode was set to PHY_INTERFACE_MODE_RGMII. With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID and disable it for PHY_INTERFACE_MODE_RGMII. Based on a similar change made in the Linux Realtek PHY driver by Martin Blumenstingl <martin.blumenstingl@googlemail.com>. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: York Sun <york.sun@nxp.com>
2017-09-07spl: typo fix for SPL_ATF_SUPPORT descriptionKever Yang
Delete one redundant 'which' for SPL_ATF_SUPPORT description. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-07linker_lists: remove incorrect commentHeinrich Schuchardt
Remove a comment line refering to a non-existent file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-09-07vsprintf: vsprintf does not have parameter sizeHeinrich Schuchardt
The inline documentation of vsprintf mentions a parameter size which does not exist in the function declaration. int vsprintf(char *buf, const char *fmt, va_list args); Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-09-07Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"Paul Barker
This reverts commit 25877d4e4c45451c5398aec3de50e0d5befe0e9f. This is a workaround for Raspberry Pi boot failures seen when passing on the device tree provided by the Raspberry Pi firmware at boot. Without CONFIG_OF_EMBED, we just get stuck at "Starting kernel ..." when we try to boot Linux with this device tree. Signed-off-by: Paul Barker <pbarker@toganlabs.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Jonathan Gray <jsg@jsg.id.au> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-07tools: .gitignore: Add libfdt related filesBin Meng
Some files are generated during libfdt build. Ignore them. This was wrongly put in the .gitignore in the root directory before. Now let's remove entries there and put them in the right place. Fixes: 34e2c285 ("gitignore: add intermediates from libfdt build") Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-07tools: .gitignore: Sort in alphabetical orderBin Meng
These are currently out of alphabetical order. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-07doc: remove duplicate text in README.gptAlison Chaiken
Signed-off-by: Alison Chaiken <alison@she-devel.com>
2017-09-07part: mac: Suppress the error message after reading ddbBin Meng
Change to use 'debug' to output the error message if it fails to read the driver descriptor block. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-05env: Add 'envtools' target to 'make help'Simon Glass
The target is not currently mentioned anywhere. Add it to the help so people can find it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-09-05env: Fix operation of 'make environ'Simon Glass
This was broken by the recent environment refactoring. Specifically: $ make environ scripts/Makefile.build:59: tools/environ/Makefile: No such file or directory make[1]: *** No rule to make target 'tools/environ/Makefile'. Stop. make: *** [Makefile:1469: environ] Error 2 Fix this by updating the Makefile and adjusting the #include filesnames in two C files. Fixes: ec74f5f (Makefile: Rename 'env' target to 'environ') Reported-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-09-05usb: gadget: g_dnl: Sync internal SN variable with envSam Protsenko
Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber if we have a serial#") "fastboot devices" stopped to show correct device serial number for TI boards, showing this line instead: ???????????? fastboot This is because serial# env variable could be set after g_dnl gadget was initialized (e.g. by using env_set() in the board file). To fix this, let's update internal serial number variable (g_dnl_serial) when "serial#" env var is changed. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2017-09-05env: Fix out of tree building of tools-allTom Rini
With the move of environment code from common/ to env/ a number of changes needed to be made to various make targets. We missed updating some of the files required for out of tree builds of the tools. Correct the 'environ' target to know that we need to work under tools/env/ still (not tools/environ/) and then update the wrappers in env_attr.c and env_flags.c to point to the new correct file. Reported-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-05Merge git://git.denx.de/u-boot-videoTom Rini
2017-09-05Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-09-05MAINTAINERS: add lcd files to video sectionAnatolij Gustschin
LCD drivers are video related, so add them to video section. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-05rockchip: i2c: fix >32 byte readsWadim Egorov
The hw can read up to 32 bytes at a time. If we need more than one chunk, we have to enter the plain RX mode. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-05rockchip: firefly-rk3399: enable ATF and dwmmcKever Yang
enable the ATF option and SDCard in defconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-05rockchip: timer: fix U_BOOT_DRIVER namePhilipp Tomsich
When I originally added this driver, I did some careless (and in retrospect: mindless) copy & paste for the U_BOOT_DRIVER structure skeletion... unfortunately, the 'arc_timer' string was committed and slipped through all reviews. This fixes the U_BOOT_DRIVER name to read 'rockchip_rk3368_timer' (as originally intended). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: Artturi Alm <artturi.alm@gmail.com>
2017-09-05rockchip: rk3288: Add reset reason detectionWadim Egorov
Sometimes it's helpful to know the reset reason caused in the SoC. Add reset reason detection for the RK3288 SoC. This will set an environment variable which represents the reset reason. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-05rockchip: phycore: Read configuration EEPROM & set ethaddr in late initWadim Egorov
Read SoM information from EEPROM and set ethaddr in late init. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-04Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-09-05ARM: rmobile: Add missing IPSR18 bits to R8A7795 PFCMarek Vasut
The IPSR18 register bits were missing from the R8A7795 ES2.0+ PFC tables, which triggered a BUG() in sh_pfc driver. This is because of an out-of-bounds access to the pinmux_gpios[] array in the PFC tables, which was too short due to the missing IPSR18 bits. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-05ARM: rmobile: Drop board_mmc_initMarek Vasut
The board_mmc_init() is no longer invoked when DM is used, so move all the pinmux config into board_init() instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-05ARM: rmobile: Replace CONFIG_RAVB with CONFIG_RENESAS_RAVB in boardsMarek Vasut
The configuration option name is the later, so replace usage of CONFIG_RAVB in board files with CONFIG_RENESAS_RAVB , otherwise the RAVB pinmux is not set and ethernet does not work. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-04splash_source: Verify FIT magicNiko Mauno
Before reading entire FIT image, add sanity check by testing image header against FDT_MAGIC. This should help avoid problems in situations where FIT is not yet available from storage device, for example when performing initial programming of device. Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Tomas Melin <tomas.melin@vaisala.com>
2017-09-04video: ipuv3_fb: skip IPU shutdown if IPU was not enabled beforeAnatolij Gustschin
Boards can skip display interface init using board_video_skip(). If display interface was not initialized (e.g. no ipuv3 framebuffer registered or IPU clock disabled), booting Linux stops due to the crash in IPU shutdown function, when accessing IPU registers. Check IPU clock and skip shutdown if clock is not enabled. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-04Merge git://git.denx.de/u-boot-dmTom Rini
2017-09-04Prepare v2017.09-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-04crypto/fsl: fix obj-yy in MakefileClemens Gruber
When enabling CONFIG_CMD_BLOB and/or CONFIG_CMD_DEKBLOB, the build fails with a linker error: ... LD u-boot arch/arm/mach-imx/built-in.o: In function `blob_encap_dek': /home/clemens/dev/u-boot/arch/arm/mach-imx/cmd_dek.c:46: undefined reference to `blob_dek' This is due to an error in the Makefile, resulting in obj-yy/obj-yn/.. and fsl_blob.o is therefore not linked. Fix it by splitting it up into two obj-y lines. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-09-04git: mailrc: Update e-mail addressLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-09-04dm: core: Add livetree documentationSimon Glass
Add some documentation for the live device tree support in U-Boot. This was missing from the initial series. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-04gitignore: add intermediates from libfdt buildPhilipp Tomsich
Since ee95d10 (fdt: Build the new python libfdt module), a number of additional files are auto-generated/installed into the tools directory. List these in .gitignore to suppress having them listed as untracked. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> References: ee95d10 (fdt: Build the new python libfdt module) Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-04fdt: fix 'prop (...) not found!' error in 'fdt set' commandHannes Schmelzer
This commit brings things back to the well known working state of the command. - With commit 9620d87259572ef21f0df60988d9a932ca673779 (cmd/fdt: support single value replacement within an array) there was an error introduced modifying (inserting) a property to a device-tree node. fdt_getprop(...) returnes a len with -1 for a non-existing property, but a memcpy with len -1 isn't a good idea and things went wrong (crash). - Some times later Tom did repair this with commit 99bb38e2cce9d99238458e0f6d1880c6d2e80a4d (fdt: Check for NULL return from fdt_getprop in 'fdt set') This repairs the crash but the behaviour of the command isn't like before, it makes it impossible to insert a property. - Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Acked-by: Simon Glass <sjg@chromium.org>
2017-09-04dm: Add migration plan for CONFIG_BLKSimon Glass
The CONFIG_BLK conversion involves quite invasive changes in the U-Boot code, with #ifdefs and different code paths. We should try to move over to this soon so we can drop the old code. Set a deadline of 9 months for this work, rounded up to the next release. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-03Makefile: Suppress output of python libfdt build commandBin Meng
This should not be printed by default. Prefix it with $(Q). Fixes ee95d10b: ("fdt: Build the new python libfdt module") Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03Makefile: Quiesce libfdt buildBin Meng
Since commit 3809e302 "Makefile: honor PYTHON configuration properly", the build commands of libfdt are printed while previously were not. This adds the missing '--quiet' back. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environmentDerald D. Woods
- Pass MTDPARTS kernel arguments to kernel - Use Kconfig CONFIG_NAND instead of CONFIG_SYS_EXTRA_OPTIONS="NAND" - Call 'usb_stop' on kernel start - Update Falcon mode setup to match other OMAP3 boards - Use "uEnv.txt" as boot script instead of "boot.scr"
2017-09-03block: Drop the ftide020 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03block: ide: Drop CONFIG_IDE_LEDBin Meng
This is actually not used. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03block: ide: Drop CONFIG_IDE_INIT_POSTRESETBin Meng
This is not referenced anywhere. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03nvme: Remove dead codes in nvme_setup_io_queues()Bin Meng
Execution cannot reach this statement: "nr_io_queues = result;" Reported-by: Coverity (CID: 166731) Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-03nvme: Fix potential sign extension issue in nvme_blk_rw()Bin Meng
"lbas" with type "u16" (16 bits, unsigned) is promoted in "lbas << ns->lba_shift" to type "int" (32 bits, signed), then sign-extended to type "unsigned long long" (64 bits, unsigned). If "lbas << ns->lba_shift" is greater than 0x7FFFFFFF, the upper bits of the result will all be 1. Fix it by casting "lbas" to "u32". Reported-by: Coverity (CID: 166730) Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-28 00:31:46 +0000