summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-07configs: am65x_evm_r5_defconfig: Enable TPS62363 regulator supportTero Kristo
TPS62363 is used to control the MPU_VDD voltage, so enable the driver for this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supplyKeerthy
Hook buck12_reg to vtm avs supply Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 nodeKeerthy
Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-j721e-r5-common-proc-board: Add VTM nodeKeerthy
Add VTM node for voltage and thermal management. For u-boot, this is needed for supporting AVS class 0, as the efuse values for the OPPs are stored under the VTM. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in suppliesTero Kristo
Link the vdd-supplies for the voltage domains under the VTM node. Also, enable the node under SPL. This will enable the AVS class 0 support on am65x-evm board. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-am654-r5-base-board: add supply rail for MPUTero Kristo
MPU voltage on AM65x-evm is controlled via the TPS62363 chip attached to i2c0 bus. Add device node for this so that it can be controlled via a regulator driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for splTero Kristo
Enable wkup_i2c0 as this is needed for voltage control. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: dts: k3-am654-r5-base-board: Add VTM nodeKeerthy
Add VTM node for voltage and thermal management. For u-boot, this is needed for supporting AVS class 0, as the efuse values for the OPPs are stored under the VTM. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: mach-k3: j721e_init: Initialize avs class 0Keerthy
Initialize avs class 0 Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: mach-k3: am6_init: Initialize AVS class 0Keerthy
Initialize AVS class 0 so that mpu voltage rail is programmed to the AVS class 0 compensated value. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: regulator: tps65941: add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for tps65941 family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: pmic: tps65941: Add support for tps65941 family of PMICsKeerthy
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: Add j721e supportKeerthy
j721e SoCs have different OPP tables. Add support for the same. Note: DM Still has lot of voltages TBD hence the correct values need to be programmed once they are published. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: regulator: tps6236x: add support for tps6236x regulatorsTero Kristo
TPS6236x is a family of step down DC-DC converters optimized for battery powered portable applications for a small solution size. Add a regulator driver for supporting these devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07clk: clk-ti-sci: Notify AVS driver upon setting clock rateKeerthy
Notify AVS driver upon setting clock rate so that voltage is changed accordingly. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0Tero Kristo
Adaptive Voltage Scaling is a technology used in TI SoCs to optimize the operating voltage based on characterization data written to efuse during production. Add a driver to support this feature for K3 line of SoCs, initially for AM65x. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- mpc85xx, socrates: Add dts, enable DM support, fix warnings, disable video
2019-11-06Merge branch '2019-11-06-reenable-llvm-in-ci'Tom Rini
- Re-enable LLVM tests in Travis and add them to GitLab and Azure
2019-11-06gitlab/azure: Enable LLVM testsTom Rini
Now that we have again fixed the problems that building with clang exposes, enable these tests on Azure and GitLab-CI as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-06travis: Fix the clang-7 testTom Rini
When using the OVERRIDE variable we need to pass -O to buildman as well to use the "override" option to buildman. Fixed: e9500f49ea35 ("travis: Use buildman for building with clang") Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-06common/console.c: Fix unused warning with console_doenv()Tom Rini
Newer versions of LLVM-7 will provide an unused function warning over console_doenv() in the case of SYS_CONSOLE_IS_IN_ENV not being enabled as can be the case in SPL. Add guards around this function. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-06Makefile: fix dependency for imx targetsHeiko Schocher
imx targets are defined in arch/arm/mach-imx/Makefile. Some of them are dependent on targets defined in main Makefile. For the Makefile in arch/arm/mach-imx this targets must be finished before the imx targets are build, if not you get for example the error: make -f /home/hs/abb/mainlining/u-boot/scripts/Makefile.build obj=arch/arm/mach-imx u-boot-dtb.imx make[2]: *** No rule to make target 'u-boot-fit-dtb.bin', needed by 'u-boot-dtb.imx'. Stop. make[1]: *** [/home/hs/abb/mainlining/u-boot/Makefile:1123: u-boot-dtb.imx] Error 2 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/work/hs/compile/u-boot/aristainetos2_defconfig' make: *** [Makefile:148: sub-make] Error 2 compile failed In above case of CONFIG_MULTI_DTB_FIT is defined, the u-boot-dtb.imx is dependent on the u-boot-fit-dtb.bin which may is not build yet ... I could reproduce this error on a travis build also if I build an out-of-tree build on a local machine with a build directory on a "slow" slow storage device. If building the same source target with a build dir on a fast storage device, the build works. I found no solution to tell the arch/arm/mach-imx/Makefile to find the targets in main Makefile, if there is a way this would be the better fix. I solved it by adding a IMX_DEPS var, which holds a list of main u-boot targets, which must be finished, before calling imx targets and fixed the build for imx targets which enabled CONFIG_MULTI_DTB_FIT. I think it is just luck, that imx targets with CONFIG_OF_SEPARATE enabled build, because the u-boot-dtb.imx target depends on u-boot-dtb.bin which gets build early enough before starting with u-boot-dtb.imx. May this targets should be fixed too. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-06Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates - USB Storage updates
2019-11-06Merge tag 'mmc-2019-11-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- fsl_esdhc driver cleanup - fsl_esdhc_imx driver improvement and compatible string update
2019-11-06mpc85xx, socrates: add DM PCI supportHeiko Schocher
add DM PCI support on the socrates board. use PCIE_FSL now. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: enable DM serialHeiko Schocher
switch to DM_SERIAL support. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: enable DM I2CHeiko Schocher
enable DM I2C support for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: disable VIDEOHeiko Schocher
disable video, as not really needed longer. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: get rid of DM_USB warningHeiko Schocher
add some defines and get rid of USB warning. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: add DM supportHeiko Schocher
enable CONFIG_DM for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, dts, socrates: add u-boot specific dtsiHeiko Schocher
add u-boot specific dtsi file for socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx: add socrates dts from linuxHeiko Schocher
add socrates device tree from linux: commit 71ae5fc87c34 ("Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest") and added SPDX license identifier. Did not fix checkpatch warnings: arch/powerpc/dts/socrates.dts:235: check: Please don't use multiple blank lines arch/powerpc/dts/socrates.dts:238: error: code indent should use tabs where possible Also, add me as board maintainer. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: suppress unknown flash warningHeiko Schocher
suppress warning: Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-05travis: Rework how we write the ~/.buildman fileTom Rini
With python3 we're now tripping over a long-standing problem with how we add to the buildman file with some toolchains. We cannot have multiple toolchain-alias sections as that leads to a parse error. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-05Merge tag 'fdt-pull-5nov19' of git://git.denx.de/u-boot-fdtTom Rini
Update to latest libfdt and pylibfdt, with added size control Update binman, dtoc, patman, buildman to Python 3 Update move_config, rkmux, microcode_tool to Python 3
2019-11-05mmc: fsl_esdhc_imx: Update compatible string for imx8mPeng Fan
To enable HS400(ES) and UHS for imx8m platforms, update the driver data to share with imx8qm esdhc_soc_data. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc_imx: drop redundant clock settingsPeng Fan
During mmc initialization, there are several calls to mmc_set_clock and mmc_set_ios. When mmc_power_off, the mmc->clock will be set, but the imx driver will use 400KHz. So the following calls to mmc_set_ios will set the clock several times which is redundant in fsl_esdhc_imx driver. So let's simplify to remove redundant clock settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up DM and non-DM codeYangbo Lu
Make DM and non-DM code clear using below structure. #if !CONFIG_IS_ENABLED(DM_MMC) <non-DM_MMC code> #else <DM_MMC code> #endif Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: always check write protect stateYangbo Lu
The QorIQ eSDHC on all platforms supports checking write protect state through register bit. So check it always. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop redundant code for non-removable featureYangbo Lu
Drop redundant code for non-removable feature. "non-removable" property has been read in mmc_of_parse(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: convert to use fsl_esdhc_get_cfg_common()Yangbo Lu
The fsl_esdhc_init() was actually to get configuration of mmc_config. So rename it to fsl_esdhc_get_cfg_common() and make it common for both DM_MMC and non-DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up bus width configuration codeYangbo Lu
This patch is to clean up bus width setting code. - For DM_MMC, remove getting "bus-width" from device tree. This has been done in mmc_of_parse(). - For non-DM_MMC, move bus width configuration from fsl_esdhc_init() to fsl_esdhc_initialize() which is non-DM_MMC specific. And fix up bus width configuration to support only 1-bit, 4-bit, or 8-bit. Keep using 8-bit if it's not set because many platforms use driver without providing max bus width. - Remove bus_width member from fsl_esdhc_priv structure. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: fix voltage validationYangbo Lu
Voltage validation should be done by CMD8. Current comparison between mmc_cfg voltages and host voltage capabilities is meaningless. So drop current comparison and let voltage validation is through CMD8. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop controller initialization in fsl_esdhc_init()Yangbo Lu
Controller initialization is not needed in fsl_esdhc_init(). It will be done in esdhc_init() for non-DM_MMC, and in esdhc_init_common() in probe for DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-04binman: Move to use Python 3Simon Glass
Update this tool to use Python 3 to meet the 2020 deadline. Unfortunately this introduces a test failure due to a problem in pylibfdt on Python 3. I will investigate. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04dtoc: Convert fdt.py to Python 3Simon Glass
Drop the now-unused Python 2 code to keep code coverage at 100%. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Convert a few tests to Python 3Simon Glass
Some tests have crept in with Python 2 strings and constructs. Convert then. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Remember the pre-reset entry sizeSimon Glass
When preparing to possible expand or contract an entry we reset the size to the original value from the binman device-tree definition, which is often None. This causes binman to forget the original size of the entry. Remember this so that it can be used when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-25 04:25:18 +0000