summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-08nitrogen6x: migrate to using device treeTroy Kisky
Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08ARM: imx: Support larger SPL size on IMX6DQRobert Hancock
Previously the SPL size on all iMX6 platforms was restricted to 68KB because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the other iMX6 variants have 256KB of OCRAM. Add an option CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which don't need to support the SL/DL variants. This allows for an SPL size of 196KB, which makes it much easier to use configurations such as SPL with driver model and FDT control. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
2019-10-08spl: imx: only use HAB if spl fit signature is not enabledRicardo Salveti
There is no need to use HAB for FIT signature validation when SPL_FIT_SIGNATURE is also enabled, as that will be validated via the normal U-Boot signed FIT image flow. This allows having SPL validated by HAB and the payloads to follow being validated with FIT signatures only. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: apalis_imx6: select MX6Q via KconfigRicardo Salveti
Toradex Apalis iMX6 modules are available in the iMX6D and iMX6Q variants, which are quite similar and already managed via only one dtb in u-boot (imx6-apalis.dtb). Select MX6Q via Kconfig by default in order to automatically enable the HAS_CAAM and MX6_SMP features. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-10-08apalis_imx6: fix broken fsl_esdhc_imx conversionRicardo Salveti
Commit e37ac717d796 ("Convert to use fsl_esdhc_imx for i.MX platforms") converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for apalis_imx6 wasn't updated accordantly. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-10-08apalis_imx6: add board_fit_config_name_match to support FIT in SPLRicardo Salveti
Only one dtb is currently supported, so match with imx6-apalis. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-10-08arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio commandPeng Fan
The gpio command currently uses equal bank names "GPIO0_" for all existing gpio banks, i. e.: U-Boot# gpio status -a Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08spl: pass args to board_return_to_bootromPeng Fan
Pass spl_image and bootdev to board_return_bootrom. i.MX8MN needs the args to let ROM to load images Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-10-08serial: Kconfig: make MXC_UART usable for MX7 and IMX8MPeng Fan
i.MX7 and i.MX8M use mxc uart driver, so let's make the SoC could use MXC_UART kconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2019-10-08tools: imx8mimage: fix HDMI/FIT parsingPeng Fan
Add missed break for HDMI entry. And moving FIT parsing earlier, because it does not have parameter, it will not runs into CFG_REG_SIZE. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-08pinctrl: imx: use devfdt_get_addr_size_indexPeng Fan
fdtdec_get_addr_size could not parse addr/size correctly is using address-cells 2 and size-cells 2 on an ARM32 SoC. So switch to use devfdt_get_addr_size_index. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mx6slevk: enable DM_SPI and DM_SPI_FLASHPeng Fan
With DM_SPI and DM_SPI_FLASH enabled, we could get: spi 0 [ ] mxc_spi | | | `-- ecspi@02008000 spi_flash 0 [ ] spi_flash_std | | | `-- m25p80@0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: mx6ul_14x14_evk: Fix SPL bootPeng Fan
When booting SPL on the board, met boot failure: " Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc device 1. error: -19 SPL: failed to boot from all boot devices " Let's register the two mmc controllers in SPL stage to avoid boot failure. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: add i.MX6ULZ boardPeng Fan
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: add i.MX6ULZ cpu typePeng Fan
Add i.MX6ULZ cpu type and helper. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: import dts for i.MX6ULZPeng Fan
Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULLPeng Fan
Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULPeng Fan
Sync kernel dts for i.MX6UL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-07Prepare v2019.10Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-07NET: DW: fix regression for ARC boardsEugeniy Paltsev
The commit 642b80d256e ("net: designware: drop compatible altr, socfpga-stmmac") breaks designware ethernet for all ARC boards. It removes "altr, socfpga-stmmac" compatible from "drivers/net/designware.c" without changing compatible in the boards which use it. Fix that by adding "snps,arc-dwmac-3.70a" compatible string to "drivers/net/designware.c" and using it in ARC boards device tree. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2019-10-06Merge branch '2019-10-06-master-imports'Tom Rini
- Regression work-around on SoCFPGA by disabling WDT in some cases. - Fix seg fault on 'host info' in some cases.
2019-10-06cmd: host: fix seg fault at "host info"AKASHI Takahiro
With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06MAINTAINERS: Update my email addressMaxime Ripard
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-06arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10Simon Goldschmidt
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72204f ("watchdog: Split WDT from SPL_WDT") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-06gitlab-ci: fix typo 'plaforms'Heinrich Schuchardt
%s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-04Merge branch '2019-10-04-master-imports'Tom Rini
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
2019-10-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
2019-10-04Revert "env: solve compilation error in SPL"Tom Rini
This reverts commit 7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04initcall.h: initcall_run_list(): Improve debug outputOvidiu Panait
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2019-10-04Kconfig: fix a typo in the description of bmp command.Andrius Štikonas
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04cmd: part: number: return hexadecimal valueRoman Stratiienko
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756f62034 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-10-04ARM: keystone2: update the default addresses of the secure monitorJean-Jacques Hiblot
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-04board: ti: am654: Disable TRNG node for HS devicesAndrew F. Davis
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-04autoboot: add necessary dependency at AUTOBOOT_MENU_SHOWAKASHI Takahiro
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-10-04MAINTAINERS, git-mailrc: Update the maintainer for socfpgaLey Foon Tan
This updates MAINTAINERS and git-mailrc to add me as maintainer for socfpga. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de>
2019-10-04Makefile: mrproper should remove *.pyc filesHeinrich Schuchardt
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-04Makefile: Fix typo around CONFIG_SPL_FIT_SOURCEMichal Simek
Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-04arm: K3: Increase default SYSFW image size allocationAndrew F. Davis
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 269000 bytes but now needs to be grown to 276000 to make room for the signatures attached to the board configuration data on High Security devices. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-10-03dm: core: Correct bad cast in ofnode_get_addr_size_index()Simon Glass
At present this code passes an fdt_addr_t pointer as a u64 pointer which is not safe, since sizeof(fdt_addr_t) may be 4, e.g. with sandbox. Correct this to avoid a stack corruption problem. Fixes: e679d03b08 (core: ofnode: Add ofnode_get_addr_size_index) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-03dm: core: Correct low cell in ofnode_read_pci_addr()Simon Glass
This reads the low cell of the PCI address from the wrong cell. Fix it. Also fix the function that this code came from. Fixes: 9e51204527 (dm: core: Add operations on device tree references) Fixes: 4ea5243a3a (fdt: fix fdtdec_get_pci_addr() for CONFIG_PHYS_64BIT) Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-01Merge tag 'rpi-next-2019.10.2' of https://github.com/mbgg/u-bootTom Rini
RPi4: Fix amount of memory seen by the kernel.
2019-10-01Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
2019-10-01x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parametersAndy Shevchenko
This is reincarnation of the U-Boot commit 3469bf4274540d1491d58e878a9edc0bdcba17ac Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Wed Jan 10 19:40:15 2018 +0200 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters after upstream got eventually the Linux kernel commit e6e094e053af75cbc164e950814d3d084fb1e698 Author: Juergen Gross <jgross@suse.com> Date: Tue Nov 20 08:25:29 2018 +0100 x86/acpi, x86/boot: Take RSDP address from boot params if available Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-01rpi4: enable dram bank initializationMatthias Brugger
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-30Merge tag 'u-boot-atmel-fixes-2019.10-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2019.10 cycle: This includes only tiny cleanups on env changes related to 2019.10 new features: removal of duplicate env settings (otherwise there may be warnings in building..) and a small fix for flashes on Gardena smart gateway (requires nand bad block tables).
2019-09-30Merge tag 'u-boot-rockchip-20190928' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix efuse read data number for rk3399 - make_fit_atf.py: fix .its generation for a single atf image
generated by cgit (git 2.34.1) at 2024-12-26 12:49:27 +0000