summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-19fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUPMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19config: remove platform CONFIG_SYS_HZ definition part 3Masahiro Yamada
This commit removes platform CONFIG_SYS_HZ definition for the remainders of part1 (commit cdb23792) and part2 (commit f232950f). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <rob.herring@calxeda.com>
2014-02-19mini2440.h: Delete remainder of dead boardMasahiro Yamada
Commit af5b9b1f removed mini2440 board support, but missed to delete include/configs/mini2440.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19doc: README: Correct file name of signature verification documentationDetlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2014-02-19unit-test: add lots of tests for the Hush 'test' commandStephen Warren
I recently re-wrote cmd_test() to add new features. Add a bunch of unit- tests to make sure I didn't break anything. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19unit-test: fix 'env default' invocationStephen Warren
"env default -f" doesn't work any more; replace it with "env default -f -a". This avoids the following when running the ut command: do_ut_cmd: Testing commands env - environment handling commands Usage: env default [-f] -a - [forcibly] reset default environment ... Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19fat: implement exists() for FAT fsStephen Warren
This hooks into the generic "file exists" support added in an earlier patch, and provides an implementation for the FAT filesystem. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19ext4: implement exists() for ext4fsStephen Warren
This hooks into the generic "file exists" support added in an earlier patch, and provides an implementation for the ext4 filesystem. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19sandbox: enable CONFIG_CMD_FS_GENERICStephen Warren
Since the generic ls command no longer segfaults sandbox, enable it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19sandbox: implement exists() functionStephen Warren
This hooks into the generic "file exists" support added in an earlier patch, and provides an implementation for the sandbox test environment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19cmd_test: implement -e test for file existenceStephen Warren
This is much like a regular shell's -e operator, except that it takes multiple arguments to specify the device type and device/partition ID in addition to the usual filename: if test -e mmc 0:1 /boot/boot.scr; then echo yes; else echo no; fi Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19cmd_test: evaluate to false without any argumentsStephen Warren
This emulates bash: $ if test; then echo yes; else echo no; fi no Currently, the code sets expr = -1 in this case, which gets mapped to 0 (true) at the end of do_test() by the logical -> shell exit code conversion. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19cmd_test: implement ! on sub-expressionsStephen Warren
Currently, ! can only be parsed as the first operator in an expression. This prevents the following from working: $ if test ! ! 1 -eq 1; then echo yes; else echo no; fi yes $ if test ! 1 -eq 2 -a ! 3 -eq 4; then echo yes; else echo no; fi yes Fix this by parsing ! like any other operator, and and handling it similarly to -a and -o. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19cmd_test: check for binary operators before unaryStephen Warren
This better mirrors the behaviour of bash, for example: $ if test -z = -z; then echo yes; else echo no; fi yes This is parsed as a string comparison of "-z" and "-z", since the check for the binary "=" operator occurs first. Without this change, the command would be parsed as a -z test of "-", followed by a syntax error; a trailing -z without and operand. This is a behavioural change, but I believe any commands affected were previously invalid or bizarely formed. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19cmd_test: use table lookup for parsingStephen Warren
do_test() currently uses strcmp() twice to determine which operator is present; once to determine how many arguments the operator needs, then a second time to actually decode the operator and implement it. Rewrite the code so that a table lookup is used to translate the operator string to an integer, and use a more efficient switch statement to decode and execute the operator. This approach also acts as enablement for the following patches. This patch should introduce no behavioural change. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19fs: don't pass NULL dev_desc to most filesystemsStephen Warren
FAT and ext4 expect that the passed in block device descriptor not be NULL. This causes problems on sandbox, where get_device_and_partition() succeeds for the "host" device, yet passes back a NULL device descriptor. Add special handling for this situation, so that the generic filesystem commands operate as expected on sandbox. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19fs: implement infrastructure for an 'exists' functionStephen Warren
This could be used in scripts such as: if test -e mmc 0:1 /boot/boot.scr; then load mmc 0:1 ${scriptaddr} /boot/boot.scr source ${scriptaddr} fi rather than: if load mmc 0:1 ${scriptaddr} /boot/boot.scr; then source ${scriptaddr} fi This prevents errors being printed by attempts to load non-existent files, which can be important when checking for a large set of files, such as /boot/boot.scr.uimg, /boot/boot.scr, /boot/extlinux.conf, /boot.scr.uimg, /boot.scr, /extlinux.conf. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19fs: fix generic save command implementationStephen Warren
Fix a few issues with the generic "save" shell command, and fs_write() function. 1) fstypes[].write wasn't filled in for some file-systems, and isn't checked when used, which could cause crashes/... if executing save on e.g. fat/ext filesystems. 2) fs_write() requires the length argument to be non-zero, since it needs to know exactly how many bytes to write. Adjust the comments and code according to this. 3) fs_write() wasn't prototyped in <fs.h> like other generic functions; other code should be able to call this directly rather than invoking the "save" shell command. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19README: document CONFIG_CMD_FS_GENERICStephen Warren
This enables generic filesystem commands such as load and ls, which automatically work with multiple filesystem types, without having to be told which is present, unlike e.g. ext2load, fatls. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-02-19imx6 SION bit has to be on for the pins that are used as ENET_REF_CLKAndy Ng
Signed-off-by: Andy Ng <andreas2025@gmail.com>
2014-02-19Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'Albert ARIBAUD
2014-02-19i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sdEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2014-02-19Exynos5250: Remove lowlevelinitRajeshwari S Shinde
Since we use CONFIG_SKIP_LOWLEVEL_INIT for Exynos baords, we dont need to a lowlevel_init.S file. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19arm: zynq: correct the argument to lldivSiva Durga Prasad Paladugu
Typecast the argument with unsigned long long for proper calculation of lldiv Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Add support for U-BOOT SPLMichal Simek
SPL is using ps7_init.c/h files which are generated from design tools which have to be copied to boards/xilinx/zynq folder before compilation. BSS section is moved to SDRAM because fat support requires more space than SRAM size. Added: - MMC and QSPI support - Boot OS directly from SPL - Enable SPL command Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
2014-02-19zynq: Update CLK in bdinfoMichal Simek
ARM has specific clk entries which should be also setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Implement dump clock commandSoren Brinkmann
Enable and implement dump clock command which shows soc frequencies. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19serial_zynq: Migrate to Zynq clock frameworkSoren Brinkmann
Remove hard coded frequencies and use Zynq's clock framework to obtain the UART clock frequency. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19net: zynq_gem: Calculate clock dividers dynamicallySoren Brinkmann
Remove hard coded clock divider setting and use the Zynq clock framework to dynamically calculate appropriate dividers at run time. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19net: zynq_gem: Move RCLK details out of driverSoren Brinkmann
The GEM driver should not need to know about Zynq specific details of RCLK related registers and bitfields in the SLCR. Move those details to the slcr driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: timer: Fix hangs if network activity attempted after about one hourMichal Simek
Cortex-A9 MPCore TRM' from ARM (ARM DDI 0407G ID072711) describes in the section 4.1.1 how this value calculation should be done. This patch fixes the problem if network activity such as ping or tftp is attempted after u-boot has been idle for an hour, it hangs, and cannot control-C out of it. Signed-off-by: Uday Hegde <udayh@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: timer: Migrate to zynq clock frameworkSoren Brinkmann
Remove hardcoded frequencies in favor of Zynq clock framework. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Provide a framework to read clock frequenciesSoren Brinkmann
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19common: Provide DIV_ROUND_CLOSEST macroSoren Brinkmann
Provide the DIV_ROUND_CLOSEST macro - taken from the Linux kernel - in common.h Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: serial: Simplify serial driver initializationMichal Simek
Define both serial uarts in the driver and return default uart based on board configuration. - Move baseaddresses to hardware.h - Define default baudrate and clock values Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Move bootmode to headersMichal Simek
These numbers will be reused by SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Use board_eth_init if CMD_NET is not enabledMichal Simek
board_eth_init can be also called in cases where CMD_NET is not enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Enable tftp put commandMichal Simek
For saving content of memory via tftp to file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Extend kernel image size to 20MBMichal Simek
Extend max kernel image size. Gunzip is checking this value. If kernel is larger, message below is shown. Uncompressing Kernel Image ... Error: inflate() returned -5 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Fix incorrect header nameMichal Simek
Zynq common configuration is placed in zynq-common.h not zynq_common.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Enable dcache supportMichal Simek
Enable dcache. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19zynq: Do not explicitely enable icacheMichal Simek
icache is already enabled by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-02-18doc: SPI: Add qspi test details on AM43xxSourav Poddar
This shows the log obtained while testing qspi on AM437x board. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18spi: ti_qspi: Add delay before xfer for am43xxSourav Poddar
Without this delay, write/read is failing. Looks like, the WIP always remain set and hence a timeout occurs leading to the error. Without this patch, device does not get probed also. Here is the log. U-Boot# U-Boot# U-Boot# U-Boot# sf probe 0 SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff Failed to initialize SPI flash at 0:0 U-Boot# sf probe 0 While with this patch, log is U-Boot# sf probe 0 SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB, mapped at 30000000 U-Boot# sf erase 0 0x80000 SF: 524288 bytes @ 0x0 Erased: OK U-Boot# mw 81000000 0xdededede 0x40000 U-Boot# sf write 81000000 0 0x40000 SF: 262144 bytes @ 0x0 Written: OK U-Boot# sf read 82000000 0 0x40000 SF: 262144 bytes @ 0x0 Read: OK U-Boot# md 0x82000000 Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18spi: ti_qspi: Add AM43xx specifics changesSourav Poddar
Add AM43xx specific changes. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18am437x_epos_evm: add SPL API, QSPI, and serial flash supportSourav Poddar
Enables support for SPI SPL, QSPI and Spansion serial flash device on the EVM. Configures pin muxes for QSPI mode. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18am43xx: Add qspi supportSourav Poddar
Add QSPI definitions and clock configuration support. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18spi: mxc_spi: i.MX6 DL/S have only 4 eCSPI controllerMarkus Niebel
The dual lite and solo variant have only 4 SPI controller. respect this in the MXC_SPI_BASE_ADRESSES macro Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
generated by cgit (git 2.34.1) at 2025-02-05 21:06:22 +0000