summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-14Merge tag 'rpi-next-2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - fix phy configuration for RPi4's bcmgenet - sync RPi4's env size with other RPi configs - add kconfig option to reserver more pages in the EFI mem map - add support for SDMA which is used by RPi4 - fix corner case boot bug for RPi3 32-bit
2020-05-13Merge tag 'arc-fixes-for-2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc Here we improve clock support for recently introduced HSDK-4xD board as well as finally enable external reset for the USB controller, which is needed to recover USB functionality after "usb reset".
2020-05-13ARC: HSDK: add reset for EHCIEugeniy Paltsev
Add reset phandle to EHCI device tree node to make on-chip reset controller usable with EHCI. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13ARC: HSDK: anounce state of BIM switchEugeniy Paltsev
Anounce state of BIM switch which defines if U-boot is loaded and started by preloader or not. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13ARC: DTS: cleanup USB node namesEugeniy Paltsev
Remove redundant '0x' from node names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: add separate clock map for HSDK-4xDEugeniy Paltsev
HSDK and HSDK-4xD clock trees are slightly different. commit 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") introduce regression for HSDK board cause crash when setting tunnel clock. Fix that. Fixes: 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: define clock map with DT binding constantsEugeniy Paltsev
Define clock map with DT binding constants so clock map can be discontinuous. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: make set_clock optionalEugeniy Paltsev
We don't want to allow change some clocks, i.e. DDR clock. So allow to have set_clock to be unset in clock map. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: prepare for multiple clock maps supportEugeniy Paltsev
The clock trees of HSDK and HSDK-4xD vary so we need to prepare CGU driver for multiple clock maps support. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: driver cleanupEugeniy Paltsev
Minor code cleanup to improve readability. No functional change intended. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: use appropriate config data typesEugeniy Paltsev
* constify clocks config data where is possible * use more appropriate data types for clocks config Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: drop unused offsetEugeniy Paltsev
Drop creg_div_oft offset as it doesn't vary (due to it is used for CPU PLL only). Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: avoid code duplicationEugeniy Paltsev
hsdk_axi_clk_cfg and hsdk_tun_clk_cfg clock divider structures and functions for their processing are almost the same so merge them to avoid code duplication. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13rpi: use the newly-added RPI_EFI_NR_SPIN_PAGESKyle Evans
Some systems may use a slightly larger stub to do PSCI for booting the RPi family. The number of pages has been made configurable so that operating systems building U-Boot for use in these kinds of environments can reserve more memory in the EFI memory map. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13rpi: Kconfig option for initial page reservationKyle Evans
While the nearly-universal default for the Raspberry Pi family is to use spin tables and the spin table implementation provided by the Raspberry Pi Foundation, FreeBSD and others may use a PSCI implementation instead. Accommodate these setups by allowing them to configure for more than one page to be reserved in the initial reservation. The default reservation remains as one page. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13configs: rpi_arm64: enable SDHCI SDMA supportMatthias Brugger
RPi4 supports SDMA on it's SDHCI controller. Enable to option for the combine RPi3/4 config. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13mmc: sdhci: Use debug for not supported SDMA info messageMatthias Brugger
If CONFIG_MMC_SDHCI_SDMA is enabled but the HW could not support it, we no longer error out. Instead we do not enable it in the host. Change the output from printf to debug as this isn't an error but only additional information now. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- Two DWC3 fixes
2020-05-12Merge tag 'u-boot-amlogic-20200511' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Enable USB Host for Odroid-C2 board - Add Open-Drain/Open-Source emulation in GPIO uclass
2020-05-12configs: rpi_arm64: sync env size with rpi_{3,4}_defconfigMarek Szyprowski
Use the same environment size as the configs dedicated for rpi3 and rpi4. This allows to switch between the builds and not to loose the settings stored on the SD card. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12configs: rpi_4 : enable SDHCI_SDMA configJaehoon Chung
Enable SDHCI_SDMA configuration. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12mmc: sdhci: not return error when SDMA is not supportedJaehoon Chung
If Host controller doesn't support SDMA, it doesn't need to return error. Because it can be worked with PIO mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12mmc: sdhci: use phys2bus macro when dma address is accessedJaehoon Chung
Use phys2bus macro when dma address is accessed. Some targets need to use pyhs2bus macro. (e.g, RPI4) After applied it, SDMA mode can be used. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12arm: bcm283x: serial: Move ofdata reading to probe() methodSimon Glass
We cannot rely on a parent bus that needs to be probed, until we know that it is probed. That means that code in the ofdata_to_platdata() method cannot rely on the parent bus being probed. Move the ofdata code in the two serial drivers into a probe() method. This fixes serial output on rpi_3b_32b with the following config.txt options: enable_uart=1 gpu_freq=250 Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12arm: dts: bcm283x: Allow UARTs to work before relocationSimon Glass
At present the pinctrl nodes are not enabled in pre-relocation U-Boot so the UARTs do not correctly select the pinconfig to enable the UART pins. Fix this so that the U-Boot banner is printed. This fixes serial output on rpi_3b_32b with the following config.txt options: enable_uart=1 gpu_freq=250 Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc) Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12net: bcmgenet: Don't set ID_MODE_DIS when not using RGMIINicolas Saenz Julienne
As per Linux's driver, ID_MODE_DIS is only set when the PHY interface is RGMII. Don't enable it for the rest of setups. This has been seen to misconfigure RPi4's PHY when booting Linux. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12usb: dwc3: Add versal compatibility string to dwc3 glue idsSiva Durga Prasad Paladugu
Xilinx Versal platform uses dwc3 and hence its compatible string needs to be added to dwc3 glue ids. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-12usb: dwc3: add dis_del_phy_power_chg_quirkJagan Teki
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, which specifies whether disable delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 respectively. Reference from below Linux commit, commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk") Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11Prepare v2020.07-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-11Merge tag 'efi-2020-07-rc2-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2-4 This pull request comprises: * bug fixes * documentation fixes * a new function to determine u16 string sizes and its unit test
2020-05-11Merge tag 'ti-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot issues on Nokia RX-51 - Configure AM6 CPSW for 10Mbps in rgmii mode. - Minor changes for J721e
2020-05-11Merge tag 'u-boot-imx-20200511' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.07 ---------------- - i.MX NAND and nandbxb for i.MX8M - imx8MM : new beacon devkit - imx8MQ : new pico-imx8MQ - imx8QXP : extend to enable M4, fixes - add thermal support - caches in SPL (missing board) - Fixes Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/685391011
2020-05-11test: dm: update test for open-drain/open-source emulation in gpio-uclassNeil Armstrong
Add tests for testing open-drain/open-source emulation in gpio-uclass. It also adds two test3-gpios configured as GPIO_ACTIVE_LOW. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11gpio: emulate open drain & open source in dm_gpio_set_value()Neil Armstrong
Handle the GPIOD_OPEN_DRAIN & GPIOD_OPEN_SOURCE flags to emulate open drain and open source by setting the GPIO line as input depending on the requested value. The behaviour is taken from the Linux gpiolib. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- zap lpc32xx_ssp driver (Jagan) - rename of phy nodev call (Jagan) - iopoll with sleep_us (Jagan) - MX25R6435F flash (Ye Li)
2020-05-11odroid-c2: enable USB host controllerBeniamino Galvani
Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-11Nokia RX-51: Update README.nokia_rx51Pali Rohár
Fix some typos, add information about setup_omap_atag, remove old suff about ONENAND_SUPPORT and update guide for UBIFS. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Disable some unused features to decrease size of u-boot binaryPali Rohár
Maximal allowed size of U-Boot binary for Nokia N900 is just 262144 bytes. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Enable CONFIG_CONSOLE_MUXPali Rohár
After this change both device display and serial console would contain U-Boto output automatically without any future configuration. This would allow easier debugging on real device as access to serial console is hard and also in qemu emulator where it is easier to copy+paste from serial console as from SDL framebuffer. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-11Nokia RX-51: Remember setup_console_atag optionPali Rohár
When variable setup_console_atag is unset then read default value from OMAP atags which passed NOLO bootloader to U-Boot. This would allow to boot Maemo Linux kernel from U-Boot with serial console settings configured in NOLO bootloader (which loads U-Boot). So serial console needs to be enabled only at one place, globally in NOLO. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Remove PART* macrosPali Rohár
Now when code for defining partitions is duplicated at two locations (option CONFIG_MTDPARTS_DEFAULT in nokia_rx51_defconfig file and macro OMAP_TAG_PARTITION_CONFIG in rx51.c file) there is no need to have common macros. Lets inline PART* macros to rx51.c file. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Revert back onenand defitionsPali Rohár
In commit commit 43ede0bca7fc ("Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT") were removed definitions for onenand partitions. Revert them back and enable needed options for onenand support. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Move code from defconfig back to C header filePali Rohár
In commit commit 37304aaf60bf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") was moved complicated multiline script code from C header to oneliner in defconfig. After this change multiline to wide oneliner it is hard to read this code and even harder to debug. Moreover this script code should be at place where are other scripts, so move it back to C header file. Define new env variable preboot which stores this script and in option CONFIG_PREBOOT calls this preboot variable. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Move comment about CONFIG_SYS_TEXT_BASE to correct placePali Rohár
In commit commit 278b90ce786f ("configs: Migrate CONFIG_SYS_TEXT_BASE") was moved definition for CONFIG_SYS_TEXT_BASE option but author probably forgot to move also comment for lines which are moving. So do it now! Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Add README.nokia_rx51 file to MAINTAINERSPali Rohár
This entry was missing in MAINTAINERS file. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11Nokia RX-51: Update my email addressPali Rohár
I'm using a new email address, so reflect this state also in U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11video: omap: change include orderDario Binacchi
Apply u-boot coding style on include files order as described by the wiki https://www.denx.de/wiki/U-Boot/CodingStyle. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-05-11arm: K3: Increase default SYSFW image size allocationAndrew F. Davis
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. Some additions to the board configuration data has pushed us slightly over the current defined size on some HS devices, expand to 278000. Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-05-11sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters arrayYe Li
On i.mx7ulp EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-11spi: fix dev parameter in dev_* callsDario Binacchi
Probably the non-use of the device parameter by the print routines did not generate compilation errors. Signed-off-by: Dario Binacchi <dariobin@libero.it>
generated by cgit (git 2.34.1) at 2025-01-02 19:19:09 +0000