uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2012-10-15	mx25: Fix eSDHC support	Benoît Thébaudeau
2012-10-15	mx25: Define cpu_eth_init() only if needed	Benoît Thébaudeau
2012-10-15	mx25: Clean up clocks API	Benoît Thébaudeau
2012-10-15	mx25 clocks: Fix MXC_FEC_CLK	Benoît Thébaudeau
2012-10-15	mx25: Define more standard clocks	Benoît Thébaudeau
2012-10-15	mx25: Clean up clock calculations	Benoît Thébaudeau
2012-10-15	mx25: Fix decode_pll	Benoît Thébaudeau
2012-10-15	mx25: add CPU revision 1.2	Eric Benard
2012-10-15	serial: mxs: spl: Remove empty serial_* functions from SPL code	Marek Vasut
2012-10-15	ARM: prevent misaligned array inits	Albert ARIBAUD
2012-10-04	arm: Fixed the offset for the no relocation.	Zhong Hongbo
2012-10-03	kirkwood: implement kw_sdram_size_adjust	Gerlando Falauto
2012-10-03	kirkwood: implement kw_sdram_bs_set()	Gerlando Falauto
2012-10-03	kirkwood: use c-struct for access to SDRAM addr decode registers	Holger Brunck
2012-09-27	ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK	Tom Rini
2012-09-06	mx25: Define default SoC input clock frequencies	Benoît Thébaudeau
2012-09-04	MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS	Marek Vasut
2012-09-03	edminiv2: orion5x: fix GPIO inits and values	Albert ARIBAUD
2012-09-01	atmel: at91sam9x5: fix name error for spi	Bo Shen
2012-09-01	mxs: Convert timeout parameter to 'unsigned int'	fabio.estevam@freescale.com
2012-09-01	gpio: add gpio api support to mx27 (v4)	trem
2012-09-01	mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'	Otavio Salvador
2012-09-01	mxs: Only build internal Ethernet controller for i.MX28	Otavio Salvador
2012-09-01	MX28: config: Allow different target generation in elftosb call	Otavio Salvador
2012-09-01	mx25: Enable dcache	Benoît Thébaudeau
2012-09-01	MX28: Shuffle around the power management code	Marek Vasut
2012-09-01	MX28: Drop the cp15 reconfiguration from SPL	Marek Vasut
2012-09-01	mxs: Convert sys_proto.h prefixes to 'mxs'	Otavio Salvador
2012-09-01	mxs: Remove not required include of iomux-mx28.h	Otavio Salvador
2012-09-01	mxs: Remove not required explicit iomux-mx28.h include	Otavio Salvador
2012-09-01	davinci, c6x: Always use C version of reset code	Tom Rini
2012-09-01	da8xx/hawkboard: Add support for ohci host controller	Sughosh Ganu
2012-09-01	i.MX28: bug fixes in PMU configuration code	Stathis Voukelatos
2012-09-01	MX28: Move the u-boot.bd info CPUDIR/SOCDIR	Marek Vasut
2012-09-01	mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs	Otavio Salvador
2012-09-01	mxs: Clarify why we poweroff in case of brownout in 5v conflict	Otavio Salvador
2012-09-01	mxs: Reowork SPL to use 'mxs' prefix for methods	Otavio Salvador
2012-09-01	mxs: prefix register structs with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: prefix register acessor macros with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: reorganize source directory for easy sharing of code in i.MXS SoCs	Otavio Salvador
2012-09-01	MX28: use a clear name for DDR2 initialization	Otavio Salvador
2012-09-01	MX28: extend print_cpuinfo() to use chip information	Otavio Salvador
2012-09-01	Enable the EMAC clock in at91_macb_hw_init().	Markus Hubig
2012-09-01	arm : Atmel : add at91sam9x5ek board support	Bo Shen
2012-09-01	DaVinci DA8xx: fix set_cpu_clk_info()	Laurence Withers
2012-09-01	DaVinci DA8xx: replace magic number for DDR speed	Laurence Withers
2012-09-01	arm/davinci/da850: add uart0 pinmux	Mikhail Kshevetskiy
2012-09-01	arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138	Mikhail Kshevetskiy
2012-09-01	da850/omap-l138: Add support to read u-boot image from MMC/SD	Lad, Prabhakar
2012-09-01	arm, davinci: perform check for initializing global data and serial init	Lad, Prabhakar