summaryrefslogtreecommitdiff
path: root/arch/arm/dts/Makefile
AgeCommit message (Collapse)Author
2019-04-12ARM: dts: stm32: Synchronize DT with kernel onePatrice Chotard
This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-09arm: at91: Add gardena-gateway-at91sam supportStefan Roese
The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09board: pm9g45: Migrate to CONFIG_DMIlko Iliev
Migrate the following options to CONFIG_DM: CONFIG_DM_GPIO CONFIG_DM_MMC CONFIG_DM_ETH CONFIG_DM_SERIAL CONFIG_DM_USB Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2019-03-22ARM: fix arch/arm/dts/MakefileMasahiro Yamada
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-19lx2160aqds : Add support for LX2160AQDS platformPankaj Bansal
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: lx2160ardb : Add support for LX2160ARDB platformPriyanka Jain
LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-16Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imxTom Rini
u-boot-imx-2019-02-16 --------------------- - vhybrid: add calibration - gw_ventana: fixes - Improve documentation for Secure Boot (HABv4) - Fix Marvell Switch - MX6 Sabre, switch to DM - Fixes for NAND
2019-02-15arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]Abel Vesa
Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2). Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboardMarcin Niestroj
Import liteSOM and liteboard dts files from Linux v4.20. They will be used after transition to driver model and device-tree based boot. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-02-14arm64: versal: Add mini configuration for VersalSiva Durga Prasad Paladugu
This patch adds new mini target for versal. This configuration is very minimal in size which runs from OCM. It contains support for mtest which can be used for running DDR memory tests. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14arm64: versal: Add mini eMMC configurationSiva Durga Prasad Paladugu
This patch adds mini eMMC configuration which has only emmc0 and emmc1 functionalities and can run from small amount of memory. This is required for memory constraint devices. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-05arm64: mvebu: Add basic support for uDPU boardVladimir Vid
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Luis Torres <luis.torres@methode.com> Cc: Scott Roberts <scott.roberts@telus.com> Cc: Paul Arola <paul.arola@telus.com> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-02Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchipTom Rini
u-boot-rockchip changes for 2019.04-rc1: * support for Chromebook Bob * full pinctrl driver using DTS properties * documentation improvements * I2S support for some Rockchip SoCs
2019-02-01rockchip: add support for veyron-speedy (ASUS Chromebook C201)Marty E. Plummer
This adds support for the ASUS C201, a RK3288-based clamshell device. The device tree comes from linus's linux tree at 3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters are for 4GB Samsung LPDDR3, decoded from coreboot's src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.inc Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01arm: dts: add am335x-shc.dts for shc boardHeiko Schocher
add DTS from linux tree commit "47bfa6d9dc8c060bf56554a465c9031e286d2f80" change for U-Boot: switch to SPDX-license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-01-28arm: dts: imx7: colibri: split dt for raw NAND and eMMC devicesStefan Agner
In preparation of adding CONFIG_DM_MMC support use separate device trees for raw NAND and eMMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28imx: Add PHYTEC phyBOARD-i.MX6UL-SeginMartyn Welch
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on the PHYTEC phyCORE-i.MX6UL SOM (PCL063). CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 44C Reset cause: POR Board: PHYTEC phyCORE-i.MX6UL I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC0 Working: - Eth0 - i2C - MMC/SD - NAND - UART (1 & 5) - USB (host & otg) Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-24Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-18board: sun50i-h5: Add Emlid Neutis N5 supportAleksandr Aleksandrov
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis-devboard target to dtb makefile - add dtsi file for Neutis N5 needs - add config file for Neutis N5 Dev board Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: update proper commit head] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-15am335x: igep003x: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra
This adds device tree and the DM_MMC driver for the AM335x IGEP based boards. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15am335x: sl50: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra
This adds device tree and the DM_MMC driver for the SL50 board. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra
This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx: add i.MX8MQ EVK supportPeng Fan
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2018-12-16ARM: rockchip: Add rv1108-elgin-r1 board supportOtavio Salvador
Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-03Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
2018-11-30arm64: zynqmp: Add mini mtest configurationMichal Simek
This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM. As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there. Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now. Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100) Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogicTom Rini
Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support
2018-11-28arm: dts: MediaTek: add device tree for MT7623Ryder Lee
This adds device tree for MT7623 development board - Bananapi R2 Detailed hardware information for BPI-R2 which could be found on http://wiki.banana-pi.org/Banana_Pi_BPI-R2. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28arm: dts: MediaTek: add device tree for MT7629Ryder Lee
This patch adds MT7629 device tree and the includes it needs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-26ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS filesMarcin Niestroj
Import chiliSOM and chiliboard dts files from Linux v4.19. They will be used after transition to driver model and device-tree based boot. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1Neil Armstrong
Synchronize the Amlogic AXG Device Tree files and bindings include from the recent Linux 4.20-rc1, because it includes patches fixing support for U-boot. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-20ARM: mvebu: dts: add Clearfog GT-8KRabeeh Khoury
The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-16armv7r: dts: am654: Add initial supportLokesh Vutla
Add R5 specific dts for am654-evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-13board: allwinner: sun50i-h6: Add Orangepi Lite2 supportJagan Teki
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13sunxi: DT: add support for PinebookVasily Khoruzhick
Pinebook is a laptop produced by Pine64, with USB-connected keyboard, USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP bridge from Analogix. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-31sunxi: add support for Banana Pi M2 Zero boardJun Nie
Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-10-25Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imxTom Rini
Merged imx8 architecture, fix build for imx8 + warnings
2018-10-22imx: add i.MX8QXP MEK board supportPeng Fan
Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-10ARM: meson: Add Khadas VIM2 board DTLoic Devulder
This adds Device Tree for the Khadas VIM2 board. The meson-gxm-khadas-vim2.dts is synchronized from Linux 4.18.10. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-11arm64: dts: k3: Add Support for AM654 SoCLokesh Vutla
Add initial DT support for AM654 EVM that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-10ARM: dts: Makefile: fix build for at91familyEugen Hristev
For at91family, makefile was building unwanted DTBs Moved them under specific target configuration. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-04dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boardsYe Li
Add the board DTS files for 14x14 EVK and 9x9 EVK. They are necessary for converting to use u-boot DM driver. Two -u-boot.dtsi are added to modify compatible string of SPI flash device to "spi-flash". Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04imx: imx7d-sdb: Add DM QSPI supportYe Li
On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default). To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399 populate R392-R395, R299, R300). So we add new DTS file and new defconfig dedicated for QSPI. Other changes to support the DM QSPI: - Add QSPI node and alias spi0. - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req conflict - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to align with kernel and also present the conflict. - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to "spi-flash" - Remove iomux settings of qspi in board codes which is not needed for DM driver. Signed-off-by: Ye Li <ye.li@nxp.com>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-27 07:54:44 +0000