summaryrefslogtreecommitdiff
path: root/arch/arm/dts/Makefile
AgeCommit message (Collapse)Author
2020-01-16Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
2020-01-16Add support for MT7622 reference boardSam Shih
This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: add imx8x based deneb boardAnatolij Gustschin
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14imx: add imx8x capricorn giedi boardAnatolij Gustschin
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14arm64: zynqmp: Add support for zcu1285 revA boardMichal Simek
zcu1285 is the same as zcu1275 but it is using Avnet FMC http://www.ultrazed.org/product/network-fmc-module Unfortunately not everything is connected now that's why this is only describing system which Xilinx is using. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for zcu208Michal Simek
The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-08imx: add i.MX8MP EVK boardPeng Fan
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07arm: dts: agilex: Add base dtsi and devkit dtsLey Foon Tan
Add device tree files for Agilex SoC platform. socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains Uboot specific DT properties. socfpga_agilex.dtsi and socfpga_agilex_socdk.dts are from Linux (kernel/git/dinguyen/linux.git, commit 6f0bf971bacacc) Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1Christian Hewitt
Import the Khadas VIM3L device-tree from [1] [1] e42617b825f8 ("Linux 5.5-rc1") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07mx7ulp: Add support for Embedded Artists COM boardFabio Estevam
The Embedded Artists COM board is based on NXP i.MX7ULP. It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK). Add the initial support for the board. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-07imx: sync with kernel device tree for Phycore SoMParthiban Nallathambi
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore SoM and Segin board based on imx6UL and imx6ULL. Changes includes Phytec naming convention for the devicetree files. Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-01-07arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)Baruch Siach
These DT files are copied from kernel v5.3 with no changes. This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and Hummingboard2 Gate/Edge. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)Baruch Siach
These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07board: ge: bx50v3: sync devicetrees from LinuxRobert Beckett
Copy device trees from linux, keeping them as separate files for each board to ease future sync. Update board code to use generic bx50v3 dt initially, then select the specific dt based on board detection. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07imx: Add support for i.MX28 based XEA boardLukasz Majewski
This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07imx6: aristainetos: add support for rev C boardHeiko Schocher
add support for revision C boards. This board has no longer a NAND. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add aristainetos 2b cslHeiko Schocher
add aristainetso board version CSL. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: readd aristainetos 2b boardHeiko Schocher
readd aristainetos 2b board. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add device tree from linuxHeiko Schocher
Add device trees from Linux in preparation for driver model conversions. device tree files taken from Linux: 71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest" and added SPDX license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2019-12-27rockchip: px30-firefly add standalone dtsKever Yang
Firefly Core-PX30-JD4 use UART2M1 while PX30 evb using UART2M0, the U-Boot proper will use the dts setting to do the IOMUX init, and a separate dts is needed for px30-firefly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-18sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2Diego Rondini
Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Sync dts from linux v5.2 commit: "ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry" (sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b) Commit: "ARM: dts: sun8i: h3: Refactor the pinctrl node names" (sha1: a4dc791974e568a15f7f37131729b1a6912f4811) has been avoided as it breaks U-Boot build. Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-03ARM: MediaTek: add basic support for MT8518 boardsmingming lee
This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-11-17rockchip: dts: tinker: Add tinker-s board supportMichael Trimarchi
Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3308: Add dts for ROC-RK3308-CCAndy Yan
Add dts file for ROC-RK3308-CC from firefly. Sync form linux rockchip for v5.5-armsoc/dts64: "arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc" (sha1: 4403e1237be3af0977aa23ef399e3496316317a0) Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: dts: rockchip: Add dts for rk3308 evbAndy Yan
Add dts for rk3308 evb, sync from the linux kernel upstream list [0]. [0]https://patchwork.kernel.org/patch/11201555/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: add px30 devicetreesHeiko Stuebner
Add px30 related devicetrees synced from the Linux kernel. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-12Merge tag 'u-boot-imx-20191105' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191105 ------------------- i.MX8MN SoC support ROM API image download support i.MX8MM enet enabling
2019-11-11Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
2019-11-10rockchip: rk3399: Add Leez P710 supportAndy Yan
Specification - Rockchip RK3399 - LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1: "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC" (sha1: fc702ed49a8668a17343811ee28214d845bfc5e6) Signed-off-by: Andy Yan <andyshrk@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-07arm: add initial support for the Phytium Durian Boardliu hao
This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-05imx: add i.MX8MN DDR4 board supportPeng Fan
Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx: support i.MX8QM ROM 7720 a1 boardOliver Graute
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03board/BuR/brppt2: initial commitHannes Schmelzer
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03imx: update i.MX8MQ device treesPatrick Wildt
This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot properLukasz Majewski
This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03arm: dts: Add devicetree support for iMXQXP AI_ML boardManivannan Sadhasivam
Add devicetree support for iMXQXP AI_ML board from Einfochips. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)
2019-10-25arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)Sunil Mohan Adapa
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4. commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)") This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree and a64-olinuxino_defconfig. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> [jagan: updated linux-next commit details] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-24arm64: zynqmp: Add support for e-a2197-00 System ControllerMichal Simek
Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for zcu216Michal Simek
zcu104/6 defconfig was used as source. Standard features are enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-03Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-02Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: dt: Also clean dtbo filesMichal Simek
dtbo files can be also generated that's why also clean them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-06 06:14:15 +0000