summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-04-12Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
2019-04-12Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-04-12Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2019-04-12Merge git://git.denx.de/u-boot-marvellTom Rini
- Misc dts files sync'ed with Linux version (Chris) - Orion watchdog fix (Chris) - kwbimage changed to also support Marvell bin_hdr binary (Chris) - Add DM support to enable CONFIG_BLK for sata_mv (Stefan) - Enable BLK on multiple platforms (Stefan) - Misc minor fixes to AXP theadorable board (Stefan) - Correct logic for DM_SCSI + unconverted drivers check (stefan) - Misc changes to kirkwood to enable DM_USB here (Chris) - Change ahci_mvebu to enable usage on A38x (Baruch) - Update the kirkwood entry in git-mailrc (Baruch) - Misc minor improvements (turris, documentation) (Baruch) - Enhance sata_mv to support Kirkwood as well (Michael) - Add wdt command (Michael) - Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG board support (Chris)
2019-04-12ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1Patrick Delaunay
Adds alias to set the pincontrol seq id. For STMFX gpio expander, force sequence number after the last bank (GPIOZ) to avoid conflict between STM32MP and STMFX gpio bank sequence number. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12ARM: dts: stm32mp1: Add adc nodesPatrice Chotard
Add adc related nodes. These nodes are used to detect the current supplied by USB type-C power in port on DK1 and DK2 boards. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12ARM: dts: stm32: Synchronize DT with kernel onePatrice Chotard
This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12stm32mp1: dts: activate psci-1.0Patrick Delaunay
Updates the stm32mp157c devicetree to bind the U-Boot PSCI driver need for power off command; TF-A for stm32mp15x supports PSCI 1.0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12power: rename stpmu1 to official name stpmic1Patrick Delaunay
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12power: stpmu1: rename files to stpmic1Patrick Delaunay
Prepare file modification for kernel alignment and rename driver to stpmic1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12stm32mp1: bsec: use device tree new compatiblePatrick Delaunay
Update bsec driver to use the device tree provided by Kernel. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: add some syscon drivers for syscfg and etpzcPatrick Delaunay
Add SYSCON driver for syscfg and etpzc and reorder in alphabetics order Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: support forced boot modePatrick Delaunay
The boot mode can be forced by key press or by TAMP register, requested in kernel by syscon-reboot-mode tamp: tamp@5c00a000 { compatible = "simple-bus", "syscon", "simple-mfd"; reg = <0x5c00a000 0x400>; reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x150>; /* reg20 */ mask = <0xff>; mode-normal = <0>; mode-fastboot = <0x1>; mode-recovery = <0x2>; mode-stm32cubeprogrammer = <0x3>; mode-ums_mmc0 = <0x10>; mode-ums_mmc1 = <0x11>; mode-ums_mmc2 = <0x12>; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12ARM: dts: dra71-evm: Correct evm_sd regulator max voltageFaiz Abbas
Correct vpo_sd_1v8_3v3 regulator max voltage to 3.3V Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com>
2019-04-12ARM: dts: dra7: Change pbias voltage to 3.3VFaiz Abbas
As per recent TRM[1], PBIAS cell on dra7 devices supports 3.3v and not 3.0v as documented earlier. Update PBIAS regulator max voltage and the voltage written in the driver to reflect this. [1] http://www.ti.com/lit/pdf/sprui30 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATAAdam Ford
With the memory mapping giving us some more avialable RAM, this updates the da850-evm-u-boot.dtsi to include the serial port, SPI and Flash nodes along with some dependent nodes in the SPL dtb. This also removes the platform data initialization code for the serial port and SPI Flash. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-12am335x, guardian: Add support for the bosch guardian boardSjoerd Simons
Add support for the Bosch Guardian board. CPU : AM335X-GP rev 2.1 Model: Bosch AM335x Guardian I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Felix Brack <fb@ltec.ch>
2019-04-12ARM: dts: k2g-ice: add dt node for netcpMurali Karicheri
This patch adds dt node for DP83867 phy used on K2G ICE board and also enable netcp device nodes for the board. EVM hardware spec recommends to add 0.25 nsec delay in the tx direction and 2.25 nsec delay in the rx direction for internal delay in the clock path to be on the safer side. The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode 1. Unfortunately, the phy data manual disallows this. Add ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to enable workaround suggested for this incorrect strap setting. This ensures proper operation of this PHY. The dts bindings are kept in sync with that from 4.14.y linux kernel. This required the pinmux device related bindings to be commented out to allow for compilation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12ARM: dts: k2g-evm: remove unused phy-mode property from phy nodeMurali Karicheri
This patch removes the unused phy-mode property from the phy dt node. On K2G, currently link-interface determines if phy is used or not and is already set to use rgmii. So this is not needed. Besides phy-mode should be added to slave interface configuration of the cpsw driver, not in the phy node. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0Chris Packham
Sync armada-385-db-88f6820-amc.dts with Linux. Retain the u-boot,dm-pre-reloc and nand differences. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12ARM: mvebu: rename armada-385-amc.dts to armada-385-db-88f6820-amc.dtsChris Packham
This board was added to u-boot first but the Linux maintainers requested a more descriptive name. Rename the file to match the Linux usage and update the board defconfig. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12arm: mvebu: Add DB-XC3-24G4XG boardChris Packham
The DB-XC3-24G4XG is a switch development board from Marvell. It can either use and external CPU card such as the db-88f6820-amc or the internal CPU that is integrated into the switch. Add support for running U-Boot on the internal CPU and enable the USB, SPI and NAND peripherals. For now this needs the bin_hdr from the Marvell U-Boot for this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12arm: mvebu: x530: Enable watchdog in SPL and U-BootChris Packham
Enable the hardware watchdog to guard against system lock ups when running in the SPL or U-Boot. Stop the watchdog just before booting so that the OS can re-enable it if needed. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12arm: sync armada-xp dts files from Linux 5.0Chris Packham
Bring in the Armada 370/XP dts/dtsi files from Linux. As U-Boot hasn't got the new NAND driver the updating binding has not been included. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-11arm64: dts: ti: k3-am65: add mcu navss nodesGrygorii Strashko
Add DT node for MCU NAVSS its components to get DMA working on AM654 SoC. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-11firmware: ti_sci: Add support for NAVSS resource managementGrygorii Strashko
Texas Instruments' System Control Interface (TI-SCI) Message Protocol abstracts management of NAVSS resources, like PSI-L pairing and unpairing, UDMAP tx/rx/flow configuration and Rings. This patch adds support for requesting and configuring such resources from TI-SCI firmware. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-04-11Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various rmobile fixes
2019-04-11DTS: imx53: Add imx53-kp-u-boot.dtsi file with u-boot specific propertyLukasz Majewski
This file adds the "u-boot,i2c-transaction-bytes" to mc34708 PMIC. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-10sun50i: a64: Add Oceanic 5205 5inMFD initial supportJagan Teki
Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - 4-lane, MIPI-DSI panel - Goodix 911 CTP - USB Host - 12V DC power supply Linux commit details about the sun50i-a64-oceanic-5205-5inmfd.dts sync: "arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support" (sha1: 00f7980a3bd53d12abc34f68146a8eed0e894248) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-09ARM: dts: rmobile: Enable USB on E2 AltMarek Vasut
The E2 Alt board has two USB ports, add missing DT nodes to make the USB available. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0Marek Vasut
Synchronize R-Car Gen3 device trees with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0Marek Vasut
Synchronize R-Car Gen2 device trees with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09ARM: dts: rmobile: Import R8A77965 M3NULCB DTsMarek Vasut
Import R8A77965 M3N ULCB device trees from Linux 5.0 , commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09arm: at91: Add gardena-gateway-at91sam supportStefan Roese
The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09arm: at91: at91sam9x5.dtsi: Add watchdog handleStefan Roese
This makes it possible to reference the watchdog DT node via "&watchdog" from board dts files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09board: pm9g45: Migrate to CONFIG_DMIlko Iliev
Migrate the following options to CONFIG_DM: CONFIG_DM_GPIO CONFIG_DM_MMC CONFIG_DM_ETH CONFIG_DM_SERIAL CONFIG_DM_USB Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2019-04-08dts: imx8qxp-mek: Add PHY post reset delayAndrejs Cainikovs
PHY cannot be detected unless we wait about 150 ms. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-05Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imxTom Rini
Fixes for 2019.04 - fix bashism for MX8 - fix ethernet for MX53 - fix docs for i.MX8
2019-04-02DTS: Fix ETH PHY reset on HSC|DDC boards (imx53)Lukasz Majewski
After the commit: "eth: dm: fec: Add gpio phy reset binding" SHA1: efd0b791069af93e9d439a70d1fe2ae8994dbbfa The FEC ETH driver switched to PHY GPIO reset performed with data defined in DTS. For the HSC|DDC boards the GPIO reset signal is active low and hence the wrong DTS description must be changed (otherwise the reset for ETH is not properly setup). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-03-30ARM: dts: rmobile: Activate I2C7 on AltMarek Vasut
Activate I2C7 on Alt to allow access to the PMIC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulatorMarek Vasut
An ADATA 16GB Industrial MLC card has so much capacitance on the Vcc pin that the usual toggling of regulator to power the card off and on is insufficient. When the card is calibrated into UHS SDR104 mode, it will remain in that mode across the power cycle and subsequent attempt to communicate with the card will fail. The test with this card is to insert it into an SDHI slot and perform "mmc dev 0 ; mmc dev 0", where the second "mmc dev 0" will fail. Fix this problem by increasing the off-on delay from 0 to 20 mS. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-22ARM: fix arch/arm/dts/MakefileMasahiro Yamada
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-19Merge git://git.denx.de/u-boot-marvellTom Rini
- Enable network interface on clearfog_gt_8k (Baruch) - Fix dreamplug boot by adding an spi0 alias to the DT (Chris) - Fix / enhance Marvell ddr3 setup / parameters (Chris) - Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris) - Enable SPL_FLASH_BAR on db-88f6820-amc (Chris) - Use correct pcie controller name in Armada-38x dts files (Chris) - Disable d-cache on Kirkwood platforms as currently needed (Chris) - Add a more descriptive comment to pci_mvebu.c (Stefan) - Update Marvell maintainers entry (Stefan)
2019-03-19ARM: mvebu: use correct name for pcie controllerChris Packham
When armada-385.dtsi was sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that include armada-385.dtsi were missed in the update retaining the old name. This updates the affected boards. Reported-by: Влад Мао <vlaomao@gmail.com> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19ARM: kirkwood: add spi0 alias for dreamplugChris Packham
The conversion to DM_SPI managed to break accessing the environment on dreamplug. This is because the environment code relies on being to able to select the SPI device based on the sequence number. Add an alias so that the spi0 bus gets sequence number 0. Reported-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Chris Packham <judge.packham@gmail.com> Tested-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-16ARM: dts: socfpga: Add missing altr,sysmgr-syscon for EMACLey Foon Tan
Syscon register is required in dts to select correct PHY interface. Fix error below: Net: Failed to get syscon: -2 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-03-14Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2019-03-13arm: dts: imx6qdl-u-boot: Enable spba-bus@2000000 simple busAdam Ford
spba-bus has a few nodes under it including the UART1 and some ESPI buses. In order to use them in SPL, the u-boot,dm-spl flag needs to be added to the spba-bus@2000000 container. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13pico-imx6ul: Import dts files from kernelFabio Estevam
Import the device tree files from kernel 5.0-rc6 in preparation for driver model conversion. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-11arm: dts: exynos: Adjust whitespace around status propertyKrzysztof Kozlowski
Just add spaces around '=' sign for clarity. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2024-12-27 10:53:37 +0000