summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-05-01Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini
Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
2019-04-26arm: dts: add missing vexpress device treesHeinrich Schuchardt
Add the device trees for * vexpress_ca5x2_defconfig * vexpress_ca9x4_defconfig * vexpress_ca15_tc2_defconfig as available in Linux 5.1 rc5. We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defconfig for Travis testing via QEMU. The UEFI base Embedded Base Boot Requirements Specification (EBBR) requires that an embedded board either provides a device tree or an ACPI table. All block devices are meant to be moved to the driver model. On ARM this requires a device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-26ARM: kirkwood: add db-88f6281-bp boardChris Packham
This is Marvell's Kirkwood development board. It has the following features - 512M DDR2 - 2 PCI connectors - 1 x1 PCI-e interface - 1 Gigabit Ethernet Port - 2 SATA Ports - USB 2.0 Interface - SDIO - 128M NAND Flash - 16M SPI Flash It can be strapped to boot from SPI or NAND so there are two defconfigs (one per boot media). Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26arm: kirkwood: dts: Add openrd-* dtb makefile build targetsStefan Roese
The following Kirkwood dtb build targets are currently missing: kirkwood-openrd-base.dtb kirkwood-openrd-client.dtb kirkwood-openrd-ultimate.dtb This patch adds them to the Makefile to fix the build error. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <judge.packham@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-25warp7: Switch to DM USBPierre-Jean Texier
This commit switches to DM USB for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25warp7: Switch to DM SerialPierre-Jean Texier
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25ARM: dts: colibri-imx6ull: update device treeMarcel Ziswiler
Fix compatible node to use regular Toradex notation. Annotate device tree with standard Colibri pin muxing comments. Use open-drain I2C pin muxings. Alphabetically re-order iomuxc nodes. Rename snvs-ad7879-int-grp touch interrupt node as per Linux device tree. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrlMarcel Ziswiler
Add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also fix indentation of pinfunc header file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warningsMarcel Ziswiler
Re-synced the device tree with Linux 5.0. This fixes the following warnings: w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@2/endpoint@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/ port@3/endpoint@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@0: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@0: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@1: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@1: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@2: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@2: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@3: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@3: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@4: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@2/endpoint@4: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@1: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@1: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@2: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@2: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@3: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@3: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@4: Relying on default #address-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size): /soc/ipu@2800000/port@3/endpoint@4: Relying on default #size-cells value w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-25imx: Add variscite DART-6UL Evaluation KitParthiban Nallathambi
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite DART-6UL iMX6ULL SoM. CPU: Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: Variscite DART-6UL Evaluation Kit Board: Variscite DART-6UL Evaluation Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2c - MMC/SD - eMMC - USB host - UART 1 Note: LCDIF porting needs DM_VIDEO https://lists.denx.de/pipermail/u-boot/2019-April/365506.html Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25dts: imx6ull: add USB aliases to support DMFilip Brozovic
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-04-25pico-imx7d: Convert DM MMCJoris Offouga
This patch enable convert DM MMC for imx7d-pico board and variant. Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing pico-pi bootscripts and environment variables that rely on mmc 0. Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will work unmodified. When converting to DM_MMC it is necessary that SPL initializes eMMC by itself, so move the original eMMC initialization from U-Boot proper to SPL. Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-25arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3Marcel Ziswiler
Add support for lpuart1, lpuart2 and lpuart3. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOMJoris Offouga
This patch imports the Linux kernel base board imx7d-pico.dtsi, pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts from Linux v5.1-rc1. Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25ARM: dts: colibri-imx6ull: fix uart-has-rtscts propertyMarcel Ziswiler
Remove vendor pre-fix fsl, from uart-has-rtscts property. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate fec to using driver modelMarcel Ziswiler
Migrate Ethernet FEC to using driver model. Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate usb to using driver modelMarcel Ziswiler
Migrate USB to using driver model. Add USBH_PEN GPIO regulator. While at it also add alias e.g. as required for UMS. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri-imx6ull: migrate mmc to using driver modelMarcel Ziswiler
Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25colibri_vf: fix ethernet by adding explicit phy nodeMarcel Ziswiler
The implicit fallback mechanism for searching the whole MDIO bus for at least one PHY has been gone with the following commit b882005a18de ("drivers/net/fec: phy_init: remove redundant logic"). This lead to the Ethernet driver erroring out as follows: Net: Could not get PHY for FEC0: addr -19 eth-1: fec@400d1000 Colibri VFxx # dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 Colibri VFxx # This commit adds an explicit PHY node which makes it work again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25imx: support i.MX8QM MEK boardPeng Fan
Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25arm: dts: introduce dtsi for i.MX8QMPeng Fan
Introduce basic dtsi for i.MX8QM, only support SDHC/FEC/LPUART. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25DTS: Enable USB host support (including regulators) on HSC|DDC boardsLukasz Majewski
This commit enables the support for K&P's HSC|DDC imx53 based boards. It was also necessary to provide device tree description for regulators to avoid board specific code definition. The GPIO pin description responsible for VBUS control has been moved from "hog" group to usbh1 dedicated one. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25DTS: Provide USB host DTS description for i.MX53 devicesLukasz Majewski
This code has been ported from Linux kernel - tag v5.1-rc2. The difference from the kernel is the removal of: fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; properties, which are not needed for correct u-boot operation (as PHY setup is done in ehci-mx5.c file itself). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25DTS: Add esdhc3 device tree description tuning for HSC|DDC boardsLukasz Majewski
In this commit the esdhc3 controller is enabled as well as it is remaped to mmc0 to not break legacy code. The pinctrl setup (e.g. 0x1e4) is the same as one from in-board file definition. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25imx8qxp: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-24Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-bootTom Rini
STM32 MCUs update: - DT rework and alignment with DT kernel v4.20 - mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20 - mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20 - configs: update for F746/769 boards
2019-04-24Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogicTom Rini
- Add support for Amlogic p200 & p201 Reference Designs - Add Amlogic SoC information display - Add support for the Libretech-AC AML-S805X-AC board - Add Amlogic AXG reset compatible - Add I2C support for Amlogic AXG - Fix AXG PIN and BANK pinctrl definitions - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset - Add initial support for Amlogic G12A SoC and U200 board - Enable PHY_REALTEK for selected boards - Fix Khadas VIM2 README
2019-04-23ARM: MediaTek: Add support for MT8516 SoCFabien Parent
Add support for MediaTek MT8516 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-23poplar: enable Ethernet driver supportShawn Guo
The 'phy' reset of gmac device in kernel device tree is not generic enough for u-boot to use, so we need to overwrite the 'resets' property as needed. With this device tree fixup and poplar_defconfig changes, Ethernet starts working on Poplar board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23dt: bcm963158: enable led controllerPhilippe Reynes
Enable the led controller in the device tree of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23dt: bcm63158: add led controllerPhilippe Reynes
Add the led controller in the bcm63158 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23dt: bcm968580xref: enable led controllerPhilippe Reynes
Enable the led controller in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1Patrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32h743i-evalPatrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7Patrice Chotard
As U-boot stm32f clock driver doesn't support new bindings for auxiliary clocks (clocks = <&rcc 1 ....>), restore old bindings for usart1 to get console output. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7Patrice Chotard
Synchronize stm32h7 device tree with kernel v4.20. U-boot DT files and pinctrl bindings are updated, useless nodes are removed and gpio compatible added. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. As sdmmc is not yet supported on kernel side, sdmmc nodes are located in eval-u-boot and disco-u-boot DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. Migrate also DT nodes which are not yet available on kernel DT side as ethernet, ltdc and qspi nodes. Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot filesPatrice Chotard
Sort nodes alphabetically to be coherent with all others STM32 DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1Neil Armstrong
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-22dt: bcm6858: add led controllerPhilippe Reynes
Add the led controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm963158: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm63158: add nand controllerPhilippe Reynes
Add the nand controller in the bcm63158 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968580xref: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6858: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmelTom Rini
Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Various fastboot, dwc2/stm32 updates
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Various stratix10, gen5 updates
generated by cgit (git 2.34.1) at 2025-01-07 20:19:10 +0000