summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2020-07-09arm: kirkwood: add DT spi0 alias to LaCie boardsSimon Guinot
The spi0 alias is needed by the environment code to retrieve the SPI flash. This patch adds some -u-boot.dtsi files, providing the spi0 aliases, for all the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Note that this -u-boot.dtsi files will be removed as soon as the spi0 aliases will be available in the upstream Linux dtsi files. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: mvebu: helios4: sync helios4 config to clearfog and dts to kernelDennis Gilmore
The helios4 is built on the same microsom as the clearfog, by syncing the config we enable the same featureset that exists in the som on the helios4. The current config does not boot as some of the clearfog changes needed to be made on the helios4 also, generally speaking most changes for the clearfog should also be made on the helios4. Signed-off-by: Dennis Gilmore <dennis@ausil.us> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-08Merge tag 'u-boot-amlogic-20200708' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Add proper Odroid-N2 board support code - Add support for Odroid-C4 single board computer
2020-07-08ARM: dts: meson-sm1-odroid-c4: add ethernet PHY resetNeil Armstrong
The PHY needs a reset in order to be functionnal for U-Boot, add the old PHY reset bindings for dwmac until we support the new bindings in the PHY node. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08boards: amlogic: add Odroid C4 supportChristian Hewitt
Odroid C4 is an Amlogic SM1 device, the board config and board documentation are adapted from the Odroid-N2 support from the same vendor. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: fix odroid-c4.rst typos and structure] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1Christian Hewitt
This imports the changes and the new Odroid-C4 board from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-07Merge tag 'u-boot-rockchip-20200708' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - dts sync from kernel for rk3399 boards; - Add Radxa Rock Pi N8, N10; - Some feature update for Pinebook Pro;
2020-07-07arm: dts: s700: add node for ethernet controllerAmit Singh Tomar
This patch adds node for ethernet controller found on Action Semi OWL S700 SoC. Since, there is no upstream Linux binding exist for S700 ethernet controller, Changes are put in u-boot specific dtsi file. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07Merge tag 'u-boot-stm32-20200707' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - arch and board update for stm32mp15: - use OPP information in device tree for 800MHz/650MHz support - ram: inprovments of test command - solve boot on closed chip when access to DBGMCU_IDC is protected - stm32prog command: Add "device anme" during USB enumeration - update configs: activate WATCHDOG and 'env erase' command, increase teed partition, support SD card after NOR boot by default and use env info in env_check - some sboard cleanups: gpio hog in dh board, specific driver for type-c stusb1600 controller code in a driver move part of code in spl.c and in common directory - fix STM32 compatible for dwc_eth_qos driver - support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx drivers - vrefbuf: fix a possible overshoot when re-enabling
2020-07-07Merge tag 'u-boot-atmel-2020.10-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.10 cycle
2020-07-07ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPLPatrick Delaunay
This patch allows to switch the CPU frequency to 800MHz on the ST Microelectronics board (DK1/DK2 and EV1) or dh electronics SOM using the STM32MP15x SOC and when it is supported by the HW (for STM32MP15xD and STM32MP15xF). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07ARM: dts: stm32: add cpufreq support on stm32mp15xPatrick Delaunay
This commit adds cpufreq support on stm32mp15x SOC. STM32 cpufreq uses operating points V2 bindings (no legacy). Nvmem cells have to be used to know the chip version and then which OPPs are available. Note that STM32 cpufreq driver is mainly based on "cpufreq-dt" driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07arm: stm32mp: spl: add bsec driver in SPLPatrick Delaunay
Add the bsec driver in SPL, as it is needed by SOC part number detection to found the supported OPP. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07ARM: dts: rockchip: Add VMARC RK3288 SOM initial supportJagan Teki
VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - SD slot, 16GiB eMMC - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet, PCIe - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07ARM: dts: rockchip: radxa-dalang: Update sdmmc propertiesJagan Teki
Radxa dalang carrier boards are used to mount vmarc SoM's of rk3399pro and rk3288 to make complete SBC. Among these combinations, card detection gpio, max-frequency properties are used with rk3399pro SoM but not required for rk3288 SoM based on the hardware schematics. So, let's move these sdmmc specific properties on associate vmarc dtsi to make common use of dalang carrier device tree file. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07arm64: dts: rockchip: Add Radxa Rock Pi N10 initial supportJagan Teki
Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1. Tested - ROCK PI N10 Model B - ROCK PI N10 Model C - Boot from SD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang CarrierJagan Teki
Carrier board often referred as baseboard. For making complete SBC or any other industrial boards, these carrier boards will be used with associated SOMs. Radxa has Dalang carrier board which supports on-board peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI, eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc. Right now Dalang carrier board is used with two SBC-variants: Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board Rock Pi N8 => VMARC RK3288 SOM + Dalang carrier board(+codec) So add this carrier board dtsi as a separate file in ARM directory, so-that the same can reuse it in both rk3288, rk3399pro variants of Rockchip SOMs. Sync this dtsi from linux-next v5.7-rc1. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOMJagan Teki
VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs. Specification: - Rockchip RK3399Pro - PMIC: RK809-3 - SD slot, 16GiB eMMC - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet, PCIe - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3399Pro SOM, this would use with associated carrier board. Sync this dtsi from linux-next v5.7-rc1. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsiJagan Teki
Sync linux-next v5.7-rc1 rk3399pro.dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07rockchip: Pinebook Pro: Fix SPI flash and store env on itPeter Robinson
Some minor fixes for SPI flash on the Pinebook Pro and also default to saving environment to the SPI flash as it's guaranteed to be on board. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (applied with make savedefconfig) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07rockchip: Pinebook Pro: enable rng to provide an entropy sourcePeter Robinson
Enable the rng so UEFI can provide entropy for KASLR Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-25ARM: dts: imx6q-tbs2910: Fix Ethernet regressionFabio Estevam
Since commit: commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc Author: Michael Walle <michael@walle.cc> Date: Thu May 7 00:11:58 2020 +0200 phy: atheros: ar8035: remove static clock config We can configure the clock output in the device tree. Disable the hardcoded one in here. This is highly board-specific and should have never been enabled in the PHY driver. If bisecting shows that this commit breaks your board it probably depends on the clock output of your Atheros AR8035 PHY. Please have a look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set "clk-out-frequency = <125000000>" because that value was the hardcoded value until this commit. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com> , the clock output setting for the AR803x driver is removed from being hardcoded in the PHY driver and should be passed via device tree instead. Update the device tree with the "qca,clk-out-frequency" property so that Ethernet can work again. Reported-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Soeren Moch <smoch@web.de>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24topic: zynqmp: Add support for zynqmp-xilinx-xdp platformMike Looijmans
XDP - Xilinx Drone Platform is a board for drones or other UAV. Pinmux the SD card by default, and if the SD card detect line is high (inactive) then pinmux the SD1 interface to EMIO instead. SD is placed on extension card and shares connection with on board wife. That means that when SD card is present in the board wifi can't be used. There seems to be an issue with DDR access from PL at 2400MT/s, after updating the PMU and ATF firmware this is causing extremely slow DDR access. Reducing the DDR speed from 2400 to 2133 appears to solve that issue, even though the hardware has proven to be 2400 capable. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24arm64: zynqmp: Change spi-max-frequency for qspi miniT Karthik Reddy
Change mini u-boot qspi spi-max-frequency to 108Mhz, make the frequency similar to full u-boot qspi flash spi-max-frequency. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24arm64: zynqmp: Fix si570 clock output names and referencesSaeed Nowshadi
Align clock output names with node references. Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-23mx6cuboxi: enable MMC and eMMC in DT for SPLWalter Lozano
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
2020-06-23arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliasesYe Li
Current aliases missed gpio0 node, and this node shoud be aliased to gpio index 0 to align with i.MX8QXP. Otherwise, we will get below message when running "gpio status" command, and see the reason by "dm uclass". => gpio status Device 'gpio@5d090000': seq 0 is in use by 'gpio@5d080000' Device 'gpio@5d0a0000': seq 1 is in use by 'gpio@5d090000' Device 'gpio@5d0b0000': seq 2 is in use by 'gpio@5d0a0000' => dm uclass uclass 36: gpio 0 * gpio@5d080000 @ fbaefb90, seq 0, (req -1) 1 * gpio@5d090000 @ fbaefc70, seq 1, (req 0) 2 * gpio@5d0a0000 @ fbaefd50, seq 2, (req 1) 3 * gpio@5d0b0000 @ fbaefe30, seq 5, (req 2) 4 * gpio@5d0c0000 @ fbaeff10, seq 3, (req 3) 5 * gpio@5d0d0000 @ fbaefff0, seq 4, (req 4) 6 * gpio@5d0e0000 @ fbaf00d0, seq 6, (req 5) 7 * gpio@5d0f0000 @ fbaf01b0, seq 7, (req 6) Signed-off-by: Ye Li <ye.li@nxp.com>
2020-06-22ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-modeFabio Estevam
As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode) the correct phy-mode should be "rgmii-id", so fix it accordingly to fix the Ethernet regression. This problem has been exposed by commit: commit 13114f38e2ccea9386726d8b9831dfc310589548 Author: Vladimir Oltean <vladimir.oltean@nxp.com> Date: Thu May 7 00:11:51 2020 +0200 phy: atheros: Explicitly disable RGMII delays To eliminate any doubts about the out-of-reset value of the PHY, that the driver previously relied on. If bisecting shows that this commit breaks your board you probably have a wrong PHY interface mode. You probably want the PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-22ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-modeFabio Estevam
As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode) the correct phy-mode should be "rgmii-id", so fix it accordingly to fix the Ethernet regression. This problem has been exposed by commit: commit 13114f38e2ccea9386726d8b9831dfc310589548 Author: Vladimir Oltean <vladimir.oltean@nxp.com> Date: Thu May 7 00:11:51 2020 +0200 phy: atheros: Explicitly disable RGMII delays To eliminate any doubts about the out-of-reset value of the PHY, that the driver previously relied on. If bisecting shows that this commit breaks your board you probably have a wrong PHY interface mode. You probably want the PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Fix the phy-mode accordingly to fix the regression. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-22ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1Fabio Estevam
Sync the device tree with 5.8-rc1. It basically contains the following extra kernel commit: commit 86b08bd5b99480b79a25343f24c1b8c4ddcb5c09 Author: Russell King <rmk+kernel@armlinux.org.uk> Date: Wed Apr 15 16:44:17 2020 +0100 ARM: dts: imx6-sr-som: add ethernet PHY configuration Add ethernet PHY configuration ahead of removing the quirk that configures the clocking mode for the PHY. The RGMII delay is already set correctly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> , which passes the 'qca,clk-out-frequency' property and it is important to specify the correct frequency generated by the AR8035. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into nextTom Rini
- Convert fsl_espi to driver model (Chuanhua) - Enable am335x baltos to DM_SPI (Jagan) - Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19Merge tag 'u-boot-stm32-20200619' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - fix SD card cart detect on DHCOM and ST boards
2020-06-19ARM: dts: stm32: Reinstate card detect behavior on ST boardsPatrick Delaunay
The cd-gpios with (GPIO_ACTIVE_LOW | GPIO_PULL_UP) gpio is thus far unsupported, reinstate the old cd-gpios behavior until this handling is fully implemented. This avoid potential issue for SDCard boot: the card detect fails with floating gpio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-19ARM: dts: stm32: Reinstate card detect behavior on DHSOMMarek Vasut
The cd-gpios with (GPIO_ACTIVE_LOW | GPIO_PULL_UP) gpio is thus far unsupported, reinstate the old cd-gpios behavior until this handling is fully implemented. This permits the DHSOM to boot from SD again, without this patch the card detect fails. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-18ARM: tegra: Enable PSCI support for Tegra210 and Tegra186Jon Hunter
The PSCI nodes are currently not populated for the Tegra210 and Tegra186 devices. This prevents the PSCI driver from being able to identify the PSCI method used by these devices and causes the probe of the PSCI driver to fail. Since commit 81ea00838c68 ("efi_loader: PSCI reset and shutdown") was added, which moves the PSCI EFI system reset handler into the PSCI driver, this has prevented the EFI system reset from working for Tegra210 and Tegra186. Therefore, populating these nodes is necessary to fix the EFI system reset for Tegra210 and Tegra186. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-06-18ARM: dts: sama5d3: fix gadget endpoint address warningEugen Hristev
arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@10: graph node unit address error, expected "a" arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@11: graph node unit address error, expected "b" arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@12: graph node unit address error, expected "c" arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@13: graph node unit address error, expected "d" arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@14: graph node unit address error, expected "e" arch/arm/dts/sama5d36ek.dtb: Warning (graph_endpoint): /ahb/gadget@00500000/endpoint@15: graph node unit address error, expected "f" Fixed by changing address in node name to hex. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-06-18ARM: dts: sama5d4: fix gadget endpoint address warningEugen Hristev
arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@10: graph node unit address error, expected "a" arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@11: graph node unit address error, expected "b" arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@12: graph node unit address error, expected "c" arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@13: graph node unit address error, expected "d" arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@14: graph node unit address error, expected "e" arch/arm/dts/at91-sama5d4ek.dtb: Warning (graph_endpoint): /ahb/gadget@00400000/endpoint@15: graph node unit address error, expected "f" Fixed by changing address in node name to hex. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-06-16omap5: uevm: convert to device modelTero Kristo
Convert omap5 uevm board to device model. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap5: Copy device tree from linux 5.7.yTero Kristo
Copy all the device tree files required for omap5 uevm support from mainline Linux. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: sdp: convert to device modelPeter Ujfalusi
Convert omap4 sdp to device model. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: Copy device tree from Linux 5.7.y for SDP4430Peter Ujfalusi
Copy all device tree files required for omap4 sdp4430 support from mainline Linux. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: panda: convert to device modelTero Kristo
Convert omap4 panda to device model. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16omap4: Copy device tree from Linux 5.7.yTero Kristo
Copy all device tree files required for omap4 panda support from mainline Linux. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-06-16dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSIEtienne Carriere
Add OP-TEE firmware node in stm32mp15 U-Boot DTSI. This node is needed since commit [1] that changed U-Boot/stm32mp15 to detect OP-TEE availability by probing the resource instead of relying on U-Boot configuration. The software sequence implemented by [1] is fine but U-Boot DTS/DTSI files were not updated accordingly since, hence OP-TEE presence is never detected by U-Boot, preventing Linux kernel from using OP-TEE resources. For consistency and to synchronize stm32mp15 DTSI files (excluding U-Boot specific DTSI files) with the Linux kernel ones, this change also moves the OP-TEE reserved memory nodes from board generic DTSI files to U-Boot specific board DTSI files. Link: [1] commit 43df0a159df6 ("stm32mp1: dynamically detect op-tee presence") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-15Merge tag 'mmc-2020-6-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- fsl_esdhc sdr104 and hs200 fix and error path fix - fsl_esdhc workaround 3.3v io issue - ca_dw_mmc cleanup - presidio-asic emmc DT update.
2020-06-15board: presidio-asic: update eMMC DT informationAlex Nemirovsky
Change DT compatibility name to match change in driver's name. Remove unused io_ds and fifo_mode fields from DT. Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Peng Fan <peng.fan@nxp.com> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
2020-06-14arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-nsLey Foon Tan
Commit e71b6f6622d6 ("i2c: designware_i2c: Rewrite timing calculation") change the hcnt and lcnt timing calculation. New timing calculation is based on calculation from Designware i2c databook. After this new timing calculation, hcnt will have negative value with i2c-scl-falling-time-ns 5000 that set in socfpga_cyclone5_socdk.dts. This patch overwrite i2c-scl-falling-time-ns to 300ns (default SCL fall time used in Designware i2c driver) for Uboot. Before the fix: => i2c dev 0 Setting bus to 0 Failure changing bus number (-22) After the fix: => i2c dev 0 Setting bus to 0 => i2c probe Valid chip addresses: 17 51 55 5B 5C 5E 66 68 70 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit (git 2.34.1) at 2025-01-11 09:04:54 +0000