summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2020-04-15ARM: dts: stm32: Rename LEDs to match silkscreen on AV96Marek Vasut
The LED labels do not match the silkscreen on the board, fix it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-04-15ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2Marek Vasut
Add DT entries, Kconfig entries and board-specific entries to configure FMC2 bus and make KS8851-16MLL on that bus accessible to U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-14Merge branch 'master' of git://git.denx.de/u-boot-marvellTom Rini
- Misc enhancements to Clearfog, including board variant detection (Joel) - Misc enhancements to Turris Mox, including generalization of the ARMADA37xx DDR size detection (Marek)
2020-04-14arm: mvebu: dts: turris_mox: fix USB3 regulatorMarek Behún
Commit e8e9715df2d4 requires the USB3 regulator node to have the enable-active-high property for the regulator to work properly. The GPIO_ACTIVE_HIGH constant is not enough anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: e8e9715df2d4 ("regulator: fixed: Modify enable-active-high...") Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: dts: turris_mox: update sdhci propertiesMarek Behún
With recent changes to the mmc subsystem (chip detect code etc) update the sdhci node of the Turris Mox device tree. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: solidrun: remove hardcoded DTS MAC addressJoel Johnson
Using a consistent hardcoded MAC address from the DTS file causes issues when using multiple devices on the same network segment. Instead rely on environment configuration or random generation. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: mvebu: dts: Sort Armada series dts alphabeticallyJosip Kelecic
Sort the Armada series dts in the Makefile alphabetically prior to adding new board support. Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr> Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14arm: dts: k3-j721e: Increase OSPI default frequency to 50MHzVignesh Raghavendra
In 1 bit mode OSPI can work at upto 50MHz, this provides better write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-04-14arm: dts: k3-am654: Increase OSPI default frequency to 50MHzVignesh Raghavendra
In 1 bit mode OSPI can work at upto 50MHz, this provides better write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-04-14am335x, guardian: load env from NANDMoses Christopher
- As there is a requirement to store certain data, we need a persistent storage in u-boot. Hence, we need to save env in NAND - Add default Guardian environment variables - Update partition table: - Reserve some space for experimentation, this ensures proper backwards compatibility - Update defconfig accordingly Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14am335x, guardian: boot stage feedback in headless modeMoses Christopher
This patch enables the guardian board to provide feedback about the boot stage in headless mode. The on-board led would behave in the following pattern * U-boot -> GLOW LED * Linux -> BLINK LED [HEART-BEAT PATTERN] Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-13Merge branch 'next'Tom Rini
Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
2020-04-13arm: socfpga: arria10: Enable cache driver in SPLLey Foon Tan
Adding "u-boot,dm-pre-reloc" and enable CONFIG_SPL_CACHE to enable cache driver in SPL. This fixed error below in SPL: cache controller driver NOT found! Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13arm: dts: arria10: Update dtsi/dts from LinuxLey Foon Tan
Update these 3 files from Linux:. - socfpga_arria10.dtsi (Commit ID c1459a9d7e92) - socfpga_arria10_socdk.dtsi (Commit ID d9b9f805ee2b) - socfpga_arria10_socdk_sdmmc.dts (Commit ID 17808d445b6f) Change in socfpga_arria10.dtsi: - Add clkmgr label, so that can reference to it in u-boot.dtsi. Change in socfpga_arria10-u-boot.dtsi: - Add compatible and altr,sysmgr-syscon for uboot. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13arm: dts: arria10: Move uboot specific properties to u-boot.dtsiLey Foon Tan
Move Uboot specific properties to *u-boot.dtsi files. Preparation to sync Arria 10 device tree from Linux. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13ARM: socfpga: Enable DM RTC bootcount on ABB SECU1Marek Vasut
Add and enable RTC-backed boot counter on ABB SECU1 platform. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-08Merge tag 'u-boot-amlogic-20200406' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next - clk: meson-g12a: missing break - sync all Amlogic DT from Linux v5.6-rc2 - MMC clock fixups - add support for Libre Computer AML-S905D-PC and AML-S912-PC
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodesIgor Opaniuk
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains. This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c). Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodesIgor Opaniuk
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains. This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c). Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-properIgor Opaniuk
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties to be accessible and device being probed before pre-relocation of U-Boot proper (drivers/core/util.c): bool ofnode_pre_reloc(ofnode node) { /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property dm-pre-reloc or u-boot,dm-spl/tpl. * They are removed in final dtb (fdtgrep 2nd pass) */ return true; if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) return true; if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) return true; /* * In regular builds individual spl and tpl handling both * count as handled pre-relocation for later second init. */ if (ofnode_read_bool(node, "u-boot,dm-spl") || ofnode_read_bool(node, "u-boot,dm-tpl")) return true; return false; } Howewer, to avoid confusion in future, replace dm-spl `%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-properIgor Opaniuk
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties to be accessible and device being probed before pre-relocation of U-Boot proper (drivers/core/util.c): bool ofnode_pre_reloc(ofnode node) { /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property dm-pre-reloc or u-boot,dm-spl/tpl. * They are removed in final dtb (fdtgrep 2nd pass) */ return true; if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) return true; if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) return true; /* * In regular builds individual spl and tpl handling both * count as handled pre-relocation for later second init. */ if (ofnode_read_bool(node, "u-boot,dm-spl") || ofnode_read_bool(node, "u-boot,dm-tpl")) return true; return false; } Howewer, to avoid confusion in future, replace dm-spl `%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-06arm64: zynqmp Add support for zcu102 rev1.1Michal Simek
rev1.1 has different DDR sodimm module that's why it requires different DDR configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Enable DM for CFI NOR flashMichal Simek
With multi defconfig NOR flash information about NOR should be taken from DT that's why there is no reason to specify address and sizes via fixed config. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Do not include full zynq-7000.dtsi to cse-nor configurationMichal Simek
There is no real need to include full DT when only some nodes are enough to use. It will save some space. Retested with FSBL for initial SoC setup. SPL didn't work. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Change zc770 xm011 Nand x16 configurationsMichal Simek
Instead of symlink include origin file and just change model description. Difference is not in DT but in ps7_init configurations which is taken based on device tree name that's why the same DT can't be used. Also update model and update comments to match configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Move pinctrl node under firmware nodeMichal Simek
Pinctrl is handled via firmare interface that's why move it there without reg property and new compatible string. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Fix GIC compatible propertyMichal Simek
dtbs_check is showing warning around GIC compatible property as interrupt-controller@f9010000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic'] is not valid under any of the given schemas Similar change has been done also by Linux kernel commit 5400cdc1410b ("ARM: dts: sunxi: Fix GIC compatible") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Fix addresses in partition definitionsMichal Simek
Node name should be <name>@<address> which is not how partitions are described. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Fix addresses in partition definitionsMichal Simek
Node name should be <name>@<address> which is not how partitions are described. Issue was found by running dtbs_check as: flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot', 'partition@qspi-linux', 'partition@qspi-rootfs' do not match any of the regexes: ... Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Sync DP subsystemMichal Simek
Sync DP subsystem with the latest state in Xilinx U-Boot repository. This binding hasn't been approved in mainline Linux but it is much better than ancient version which this patch removes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Do not duplicate flash partition label propertyAmit Kumar Mahapatra
In kernel 5.4, support has been added for reading MTD devices via the nvmem API. For this the mtd devices are registered as read-only NVMEM providers under sysfs with the same name as the flash partition label property. So if flash partition label property of multiple flash devices are identical then the second mtd device fails to get registered as a NVMEM provider. This patch fixes the issue by having different label property for different flashes. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: dts: zynqmp: Add clk cells for sdhciAshok Reddy Soma
Add clock-cells and clock-output-names for sdhci0 and sdhci1. These are needed for linux sdhci driver from 5.4 version onwards. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Remove second copy of reset-controllerMichal Simek
Reset controller is handled via firmware that's why it should be the part of firmware node. Origin solution hasn't been removed when above change was applied by commit b07e97b4ba27 ("arm64: zynqmp: Use reset header in zynqmp.dtsi"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP BoardsManish Narani
Modify dts files to add 'no-1-8-v' property for all the ZynqMP boards. User can remove this property to enable the UHS mode. This is to keep the same speed (HS) modes across all the stages of the Linux Boot. Due to power cycling limitation of some of the ZynqMP boards, some SD cards don't get power cycled and are failing in Linux. Signed-off-by: Manish Narani <manish.narani@xilinx.com>
2020-04-06arm64: zynqmp: Sync zynqmp fpga manager with mainlineNava kishore Manne
Sync zynqmp fpga manager with mainline. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Remove unused zynqmp-clk.dtsiMichal Simek
All boards have been converted to firmware based driver that's why we can remove this file now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Fix spi name nodeMichal Simek
None name address should be aligned with address. DTC 1.5.1 is reporting issues related to that. arch/arm/boot/dts/zynq-zc770-xm010.dts:106.10-119.4: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/zynq-zc770-xm013.dts:101.19-109.4: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Update Copyright years to 2020Michal Simek
Trivial change. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Replace gpio-key,wakeup with wakeup sourceMichal Simek
The same change has been done for Zynq by commit 1241c72b6db1 ("ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property") in mainline Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source propertySudeep Holla
Most of the legacy "gpio-key,wakeup" boolean property is already replaced with "wakeup-source". However few occurrences of old property has popped up again, probably from the remnants in downstream trees. Replace the legacy properties with the unified "wakeup-source" property introduced in the Linux kernel commit 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: dts: zc702: Fix I2C bus warningsQuanyang Wang
The dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. Warning from Linux kernel: arch/arm/boot/dts/zynq-zc702.dts:187.13-190.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34" arch/arm/boot/dts/zynq-zc702.dts:191.13-194.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35" arch/arm/boot/dts/zynq-zc702.dts:195.13-198.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36" Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: dts: meson: add libretech-pc supportJerome Brunet
Add support for the Amlogic based libretech-pc platform. This platform comes with 2 variant, based on the s905d or s912 SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: update board/amlogic/q200/MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06arm64: dts: meson: import libretech-pc from linux v5.6-rc2Jerome Brunet
Sync the libretech-pc device tree from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06arm64: dts: meson: sync dt and bindings from v5.6-rc2Jerome Brunet
Sync the device tree and dt-bindings from Linux v5.6-rc2 11a48a5a18c6 ("Linux 5.6-rc2") The only exception to this is the mmc pinctrl pin bias of gxl SoC family. This is a fix which found its way to u-boot but not Linux yet. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-05ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DTMarek Vasut
The card-detect GPIO and any other GPIO access currently doesn't work in U-Boot SPL on any STM32 platform and crashes the SPL. To work around this problem on AV96 right before release, remove the cd-gpios from DT. This patch must be reverted right after release, once the proper fix for the GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-04-02ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportTom Warren
The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02ARM: tegra: p2371-2180: add I2C nodes to DTStephen Warren
This adds to the DT the I2C controllers that connect to the board ID EEPROM, etc. With this change, you can now probe all I2C devices on a TX1 board. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-01Merge tag 'u-boot-stm32-20200401' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Fix device tree of Avenger96 board from Arrow Electronics and add compatibility with stm32mp15_dhcom_basic_defconfig
generated by cgit (git 2.34.1) at 2025-01-05 04:15:36 +0000