uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2012-09-06	mx31: Define default SoC input clock frequencies	Benoît Thébaudeau
2012-09-01	mxc: Define architecture identifier	Benoît Thébaudeau
2012-09-01	MX: Set a common gpio.h for all i.MX	Stefano Babic
2012-09-01	mx3: Fix typo on IPU_CONF_CSI_EN	Benoît Thébaudeau
2012-07-11	mxc_i2c: specify i2c base address in config file	Troy Kisky
2012-02-27	tt01: add video support	Helmut Raiger
2012-02-27	mxc_spi: move machine specifics into CPU headers	Eric Nelson
2012-02-12	mmc: access mxcmmc from mx31 boards	Helmut Raiger
2011-12-06	MX: serial_mxc: cleanup removing nasty #ifdef	Stefano Babic
2011-11-11	mx31: Use proper IO accessor for GPR register	Fabio Estevam
2011-11-03	mx31: add ESD control registers	Helmut Raiger
2011-11-03	mx31: define pins and init for UART2 and CSPI3	Helmut Raiger
2011-11-03	mx31: Introduce mx31_set_gpr function	Fabio Estevam
2011-10-27	mx31: provide readable WEIM CS accessor	Helmut Raiger
2011-10-13	mx31: make HSP clock for mx3fb driver available	Helmut Raiger
2011-09-30	MX31: Disable watchdog during low-power modes	Fabio Estevam
2011-09-07	MX31: fix missing mxc_get_clk() call	Stefano Babic
2011-09-04	MX31: make use of GPIO framework for MX31 processor	Stefano Babic
2011-09-03	MX31: removed warnings due to clock.h	Stefano Babic
2011-07-18	MX31: Cleanup clock function	Stefano Babic
2011-07-14	imx: Add support for USB EHCI on imx25	Matthias Weisser
2011-05-23	MX31: drop warnings due to missing prototype for mxc_watchdog_reset()	Stefano Babic
2011-05-11	MX31: change return value of get_cpu_rev	Stefano Babic
2011-05-11	MX31: removed warning due to missing prototype	Stefano Babic
2011-04-27	MX31: drop warnings in get_cpu_rev	Stefano Babic
2011-04-27	ARM: MX31: Fix file name label	Fabio Estevam
2011-04-27	ARM: mx31: Print the silicon version	Fabio Estevam
2011-04-27	IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers	Stefano Babic
2011-04-27	MX31: add support for MX31 watchdog	Stefano Babic
2011-02-02	SPI: mxc_spi: replace fixed offsets with structures	Stefano Babic
2010-10-20	MX31: Removed warnings for iomux function	Stefano Babic
2010-10-13	MX31: add support for setting pin pads	Stefano Babic
2010-10-13	MX31: Adding missing iomux pin to MX.31 registers	Stefano Babic
2010-09-29	Use common function to set GPIOs for MX3 and MX5	Stefano Babic
2010-04-30	MX31: Support 128MB RAM on QONG module	Stefano Babic
2010-04-30	MX31: add pin definitions for NAND controller	Stefano Babic
2010-04-30	MX31: add accessor function to get a gpio	Stefano Babic
2010-04-13	Move architecture-specific includes to arch/$ARCH/include/asm	Peter Tyser