summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx6
AgeCommit message (Expand)Author
2013-03-20Add initial support for Wandboard dual lite and solo.Fabio Estevam
2013-03-07mx6: Provide a structure for accessing HDMI registersFabio Estevam
2013-03-07i.MX6: Add DDR controller registersEric Nelson
2013-03-07i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIOEric Nelson
2013-03-07i.MX6: crm_regs: define IOMUXC_GPR4/6/7Eric Nelson
2013-03-07i.MX6: crm_regs: define CCM_CCGRx for use in board config filesEric Nelson
2013-03-07i.MX6: consolidate pad names for multi-CPU boardsEric Nelson
2013-02-12mx6: Disable Power Down Bit of watchdogFabio Estevam
2012-11-10arch-mx6: add mx6dl_pins.hTroy Kisky
2012-11-10imx-common: cpu: add imx_ddr_sizeTroy Kisky
2012-11-10mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky
2012-10-16i.MX6: add HDMI transmitter register declarations from kernel WIP.Eric Nelson
2012-10-16i.MX6: set drive strength for parallel RGB padsEric Nelson
2012-10-16mx6qsabreauto: Pass the board revision to the kernelFabio Estevam
2012-10-15mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau
2012-10-15imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser
2012-10-15i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson
2012-10-15i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfieldsEric Nelson
2012-10-15i.MX6: Add ANATOP_PFD_480 bitfield constantsEric Nelson
2012-10-15i.MX6: define IOMUX_GPR3 register bitfieldsEric Nelson
2012-10-15i.MX6: define bitfields for CHSCCDR registerEric Nelson
2012-10-15i.MX6: change register name for CCM_CHSCCDR to match ref. manualEric Nelson
2012-10-15i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fieldsEric Nelson
2012-09-17MX6: drop binary constants from iomux headerStefano Babic
2012-09-01mxc: Define architecture identifierBenoît Thébaudeau
2012-09-01MX: Set a common gpio.h for all i.MXStefano Babic
2012-09-01imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky
2012-09-01iomux: move IOMUX_GPR13_xxx definesTroy Kisky
2012-07-31imx-common: add i2c.c for bus recovery supportTroy Kisky
2012-07-31i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky
2012-07-20mx6: Make pad name macro consistent with the datasheetAshok
2012-07-10mx6: Allow mx6 to access the IPUv3 registersFabio Estevam
2012-07-07i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctlyJason Liu
2012-05-15i.MX6: add enable_sata_clock()Eric Nelson
2012-05-15i.MX6: Add ANATOP regulator initDirk Behme
2012-05-15imx-common: Factor out get_ahb_clk()Fabio Estevam
2012-04-16imx: Remove unneeded/repititive definitions from imx headersVikram Narayanan
2012-04-16i.MX6: define CACHELINE_SIZEEric Nelson
2012-03-27mx6: Read silicon revision from registerFabio Estevam
2012-03-27mx6: Remove duplicate definition of ANATOP_BASE_ADDRFabio Estevam
2012-03-26usb/ehci: Add USB support for the MX6QWolfgang Grandegger
2012-02-27net: fec_mxc: add 1000 Mbps selectionTroy Kisky
2012-02-27mx6q: Add support for ECSPI through mxc_spi driverEric Nelson
2012-02-27mx6q: define GPIO macros for translating between ordinals and port:indexEric Nelson
2012-02-12i.mx6: mx6x_pins: Fix uart txd definitionsTroy Kisky
2012-01-16imx: mx6q: add aipstz init for off platform periphJason Liu
2012-01-16i.mx6:imx6q: allign MAC address with burned-in orderingJason Liu
2012-01-16net: imx: Add multi-FEC support for imx_get_mac_from_fuseFabio Estevam
2011-12-09i.mx: add the initial support for freescale i.MX6Q processorJason Liu