summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
AgeCommit message (Collapse)Author
2019-08-22armv8: fsl-layerscape: add base addresses for several devicesLaurentiu Tudor
Add CCSR base addresses for ESDHC2, EDMA QDMA, DISPLAY and GPU devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: fsl-layerscape: add missing sec jr base address definesLaurentiu Tudor
Add defines for all the SEC job rings base addresses. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22gpio: do not include <asm/arch/gpio.h> on ARCH_LS1088AChuanhua Han
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch ls1088a. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22gpio: do not include <asm/arch/gpio.h> on ARCH_LS2080AChuanhua Han
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch ls2080a. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028AChuanhua Han
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch ls1028a. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160AChuanhua Han
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch ls2160a. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22drivers: i2c: mxc: Fix compiler error when using i2c dm modeChuanhua Han
I2C dm mode enablemenet causes below compilation errors: In file included from include/config.h:8:0, from include/common.h:20: include/config_fallbacks.h:51:4: error: #error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used" # error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used" ^~~~~ In file included from include/config.h:8:0, from include/common.h:20: include/config_fallbacks.h:51:4: error: #error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used" # error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used" ^~~~~ board/freescale/lx2160a/lx2160a.c: In function 'board_early_init_f': board/freescale/lx2160a/lx2160a.c:108:2: warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] i2c_early_init_f(); ^~~~~~~~~~~~~~~~ arch_early_init_r drivers/i2c/mxc_i2c.c: In function 'mxc_i2c_probe': drivers/i2c/mxc_i2c.c:824:8: warning: implicit declaration of function 'enable_i2c_clk'; did you mean 'enable_irq_wake'? [-Wimplicit-function-declaration] ret = enable_i2c_clk(1, bus->seq); ^~~~~~~~~~~~~~ enable_irq_wake So fix these compilation errors. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-12Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
2019-08-12Merge branch '2019-08-11-ti-imports'Tom Rini
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12watchdog: omap_wdt: Convert watchdog driver to use DT and DMSuniel Mahesh
This patch adds device tree and driver model watchdog support, converts the legacy omap watchdog driver to driver model for TI AM335x chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices after DT/DM conversion, adjusted kconfig accordingly. DM watchdog support is enabled by default in SPL. The SPL image doesn't fit into SRAM because of size constraints and build breaks with an overflow. For this reason DM watchdog support should be disabled in SPL, driver code should be adjusted accordingly to serve this purpose. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-12arm: meson: add sm command to retrieve the reboot reasonNeil Armstrong
The Secure Monitor offers multiple services, like returning the SoC unique serial number, and can provide the "reboot reason" as set by the previous booted system. This extends the Amlogic specific "sm" cmd with a "reboot_reason" subcommand to print or set a specified environment variable with the reboot reason in human readable format. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-11board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-05rockchip: ram: add full feature rk3328 DRAM driverKever Yang
This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/9fb0777ec3cc6a89af9d2e0969c3bfe58306a88d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-26rockchip: declear boot_devices in bootrom.hKever Yang
boot_devices may defined in soc file, and used in board file, we need to delear it in header file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26rockchip: intruduce common BROM_BOOTSOURCE_ID_ADDRKever Yang
The boot source from BootRom is store at a fix offset of IRAM, update to use the common macro instead of rk3399 specific one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-24psci: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: arch/arm/mach-stm32mp/psci.c: warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes] Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-20rockchip: remove rk_timerKever Yang
We have convert all SoC to use DM timer or ARM arch/generic timer, we can remove this rk_timer now. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: move configure_l2ctlr back to rk3288Kever Yang
The configure_l2ctlr() is used only by rk3288, do not need to locate in sys_proto.h Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-21arm: include: rockchip: Add rk3399 pmu fileJagan Teki
Add pmu header file for rk3399 SoC, this will help to configure pmu in sdram driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add DdrModeJagan Teki
Add DdrMode structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddrtimingC0Jagan Teki
Add DdrTimingC0 structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddr version enc macroJagan Teki
Add dram config macro for handling ddr version number. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Introduce sys_reg3 for more capacity infoJagan Teki
cs0_row, cs1_row and cs1_col needs more bits to show its correct value, update to make use of both sys_reg2, sys_reg3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash similar patches into one patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Simply existing dram enc macroJagan Teki
Add simplified and meaningful macro for all setting. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash the similar patches into 1 patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19arm: imx8: don't duplicate build_info()Anatolij Gustschin
Move build_info() to common place. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19arm: imx8: factor out uart init codeAnatolij Gustschin
New imx8 boards started adding duplicated UART init code. Factor out this to common function sc_pm_setup_uart(). Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19misc: imx8: add sc_misc_get_tempPeng Fan
Add sc_misc_get_temp to support get temperature Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-19i.MX6: nand: add nandbcb command for imxShyam Saini
Writing/updating boot image in nand device is not straight forward in i.MX6 platform and it requires boot control block(BCB) to be configured. It becomes difficult to use uboot 'nand' command to write BCB since it requires platform specific attributes need to be taken care of. It is even difficult to use existing msx-nand.c driver by incorporating BCB attributes like mxs_dma_desc does because it requires change in mtd and nand command. So, cmd_nandbcb implemented in arch/arm/mach-imx BCB contains two data structures, Firmware Configuration Block(FCB) and Discovered Bad Block Table(DBBT). FCB has nand timings, DBBT search area, page address of firmware. On summary, nandbcb update will - erase the entire partition - create BCB by creating 2 FCB/DBBT block followed by 1 FW block based on partition size and erasesize. - fill FCB/DBBT structures - write FW/SPL on FW1 - write FCB/DBBT in first 2 blocks for nand boot, up on reset bootrom look for FCB structure in first block's if FCB found the nand timings are loaded for further reads. once FCB read done, DTTB will load and finally firmware will be loaded which is boot image. Refer section "NAND Boot" from doc/imx/common/imx6.txt for more usage information. Reviewed-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-07-19ram: rk3399: debug: Add sdram_print_strideJagan Teki
Add code to print the channel stride, this would help to print the stride of associated channel. Here is sample print on LPDDR4, 50MHz. 256B stride Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: debug: Add sdram_print_ddr_infoJagan Teki
Add sdram ddr info print support, this would help to observe the sdram base parameters. Here is sample print on LPDDR4, 50MHz channel 0 BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: Add debug sdram driverJagan Teki
Add sdram driver to handle debug across rockchip SoCs. This would help to improve code debugging feature for sdram drivers in rockchip family, whoever wants to debug the driver should call these core debug code on their respective platform sdram drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19arm: include: rockchip: Add DDR4 enumJagan Teki
Add DDR4 enum number in common header. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19arm: include: rockchip: Move dramtypes to common headerJagan Teki
dramtype enum numbers as common across all dram controllers in rockchip, so move the eneum values in common header. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Move common sdram structures in common headerJagan Teki
Move common sdram structures like sdram_cap_info, sdram_base_params into sdram_common header, this would help to reuse the same from another controllers like px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: s/rk3399_base_params/sdram_base_paramsJagan Teki
Most of the ddr parameters are common in rk3399_base_params structure and which would reuse it in another controller like px30 in future. So, rename the structure from rk3399_base_params into sdram_base_params. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: rk3399: Add cap_info structureJagan Teki
Group common ddr attributes like - rank - col - bk - bw - dbw - row_3_4 - cs0_row - cs1_row - ddrconfig into a common cap_info structure for more code readability and extend if possible based on the new features. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-18Merge branch '2019-07-17-master-imports'Tom Rini
- Various FS/disk related fixes with security implications. - Proper fix for the pci_ep test. - Assorted bugfixes - Some MediaTek updates. - 'env erase' support.
2019-07-18ARM: correct detection of thumb modeHeinrich Schuchardt
When a crash occurs in thumb mode the crash dump is incorrect. This is due to the usage of a non-existing configuration variable CONFIG_ARM_THUMB in the definition of macro thumb_mode(regs). Use CONFIG_IS_ENABLED(SYS_THUMB_BUILD) to detect that the code has been compiled for thumb mode. Remove ARM_THUMB from config_whitelist.txt. With the patch crash dumps indicate thumb mode correctly. On a system with thumb mode: => exception unaligned data abort pc : [<8f7a2b52>] lr : [<8f7ab1ef>] reloc pc : [<1780cb52>] lr : [<178151ef>] sp : 8ed8c3f8 ip : 8f7a2b4d fp : 00000002 r10: 8f7f8228 r9 : 8ed95ea8 r8 : 8ed99488 r7 : 8f7ab141 r6 : 00000000 r5 : 8ed8c3f9 r4 : 8f7f6390 r3 : 8ed9948c r2 : 00000001 r1 : 00000000 r0 : 8f7f6390 Flags: nzCv IRQs off FIQs off Mode SVC_32 (T) Code: 8f7e 466d f105 0501 (e9d5) 6700 The Flags line has '(T)' and in the Code line the output is in u16 groups. On a system without thumb mode: => exception breakpoint prefetch abort pc : [<7ff5a5c8>] lr : [<7ff675ec>] reloc pc : [<0000e5c8>] lr : [<0001b5ec>] sp : 7ee0ad80 ip : 7ff5a5cc fp : 7ff674cc r10: 00000002 r9 : 7ef0bed8 r8 : 7ffd6214 r7 : 7ef0e080 r6 : 00000000 r5 : 7ffd4090 r4 : 00000000 r3 : 7ef0e084 r2 : 00000001 r1 : 00000000 r0 : 7ffd4090 Flags: nzCv IRQs off FIQs off Mode SVC_32 Code: e1a0500d e2855001 e1c560d0 e3a00001 (e12fff1e) The Flags line does not show '(T)' and in the Code line the output is in u32 groups. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-17arm: omap_i2c: Remove unwanted header file inclusionVignesh R
There is no need for to include this header here, so drop it. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-16sunxi: H6: Add DDR3 support to DRAM controller driverAndre Przywara
At the moment the H6 DRAM driver only supports LPDDR3 DRAM. Extend the driver to cover DDR3 DRAM as well. The changes are partly motivated by looking at the ZynqMP register documentation, partly by looking at register dumps after boot0/libdram has initialised the controller. Many thanks to Jernej for contributing some fixes! Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-16sunxi: H6: move LPDDR3 timing definition into separate fileAndre Przywara
Currently the H6 DRAM driver only supports one kind of LPDDR3 DRAM. Split the timing parameters for this LPDDR3 configuration into a separate file, to allow selecting an alternative later at compile time (as the sunxi-dw driver does). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-11km/spi: remove deprecated SPI flash driver code for KM Kirkwood boardsPascal Linder
KM Kirkwood boards now implement the driver model for its SPI flash interface. Therefore, the old board specific claim and release functions can be deleted. The preprocessor definition CONFIG_SYS_KW_SPI_MPP is yet unused as well. All its appearances and dependencies are removed in the kirkwood_spi driver, header files and finally the configuration whitelist. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-08Merge tag 'u-boot-amlogic-20190704' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix khadas-vim README - add support for unique generated MAC adresses from SoC serial, limited to Amlogic GXL/GXM boards for now
2019-07-04ARM: meson: add unique MAC address generationNeil Armstrong
Add support for generating an unique MAC address using the SoC internal serial number from the Secure Monitor interface. The algorithm generates an unicast locally administered 6bytes minus 2bits address using an crc16 of the serial for the top 16bits with the lower 2 bits masked to setup the unicast locally administered property and a crc24 for the lower 24bits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04ARM: meson: sm: Add secure monitor calls to retrieve SoC serial numberNeil Armstrong
The Secure Monitor interface permits retrieving the SoC Serial Number, add a function to retrieve it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit (git 2.34.1) at 2024-12-30 20:54:54 +0000