summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
AgeCommit message (Expand)Author
2012-09-01mxs: Replace i.MX233 by i.MX23 on copyright headerOtavio Salvador
2012-09-01mx35: Remove declaration of non-existing functionBenoît Thébaudeau
2012-09-01mx35: Move clock enums to clock.hBenoît Thébaudeau
2012-09-01mx35: Remove declaration of non-existing functionBenoît Thébaudeau
2012-09-01mx35: Fix broken pin definitionsBenoît Thébaudeau
2012-09-01mx5: Undeclare imx_decode_pll()Benoît Thébaudeau
2012-09-01MX: Set a common gpio.h for all i.MXStefano Babic
2012-09-01mxs: Use correct function name to initialize dramFabio Estevam
2012-09-01imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky
2012-09-01iomux: move IOMUX_GPR13_xxx definesTroy Kisky
2012-09-01mx35: Remove duplicate GPIO3_BASE_ADDRBenoît Thébaudeau
2012-09-01mx3: Fix typo on IPU_CONF_CSI_ENBenoît Thébaudeau
2012-09-01mx35: Fix typo on EDIOBenoît Thébaudeau
2012-09-01rtc: add support of mx27 rtctrem
2012-09-01mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador
2012-09-01mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.hOtavio Salvador
2012-09-01video: support exynos pwm backlight driverDonghwa Lee
2012-09-01video: exynos fb driver supports display port featureDonghwa Lee
2012-09-01video: support exynos display port driversDonghwa Lee
2012-09-01EXYNOS5: add display port base addressDonghwa Lee
2012-09-01EXYNOS5: support display port phy control functionDonghwa Lee
2012-09-01video: support exynos fimd driver for various exynos seriesDonghwa Lee
2012-09-01EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0Rajeshwari Shinde
2012-09-01EXYNOS5: CLOCK: Add BPLL supportRajeshwari Shinde
2012-09-01EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0Rajeshwari Shinde
2012-09-01Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0Rajeshwari Shinde
2012-09-01EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0Rajeshwari Shinde
2012-09-01ARCH: SPL: Add parametric board initializerRajeshwari Shinde
2012-09-01ARM: add tegra20 support to arm720tAllen Martin
2012-09-01tegra20: rename tegra2 -> tegra20Allen Martin
2012-09-01ARM: add basic support for the Broadcom BCM2835 SoCStephen Warren
2012-09-01u8500: Enabling power to MMC device on AB8500 V2Mathieu J. Poirier
2012-09-01u8500: Moving processor-specific functions to cpu area.Mathieu J. Poirier
2012-09-01snowball: applying power to LAN and GBF controllersMathieu J. Poirier
2012-09-01snowball: Moving to ux500.v2 addess scheme for PRCMU accessMathieu J. Poirier
2012-09-01snowball: Adding CPU clock initialisationMathieu J. Poirier
2012-09-01snowball: Adding architecture dependent initialisationMathieu J. Poirier
2012-09-01u8500: Moving prcmu to cpu directoryMathieu J. Poirier
2012-09-01snowball: Add support for ux500 based snowball boardMathieu J. Poirier
2012-09-01am33xx evm: Update secure_emif_sdram_config during ddr initSatyanarayana, Sandhya
2012-09-01da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu
2012-09-01omap4/5/am33xx: Make lowlevel_init available to all armv7 platformsTom Rini
2012-09-01am33xx: Correct MMC1, remove MMC2 supportTom Rini
2012-09-01mxs: Reowork SPL to use 'mxs' prefix for methodsOtavio Salvador
2012-09-01mxs: prefix register structs with 'mxs' prefixOtavio Salvador
2012-09-01mxs: prefix register acessor macros with 'mxs' prefixOtavio Salvador
2012-09-01mxs: reorganize source directory for easy sharing of code in i.MXS SoCsOtavio Salvador
2012-09-01MX28: extend print_cpuinfo() to use chip informationOtavio Salvador
2012-09-01arm : Atmel : add at91sam9x5ek board supportBo Shen
2012-09-01DaVinci DA8xx: replace magic number for DDR speedLaurence Withers