uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2012-09-01	mx5: Undeclare imx_decode_pll()	Benoît Thébaudeau
2012-09-01	MX: Set a common gpio.h for all i.MX	Stefano Babic
2012-09-01	mxs: Use correct function name to initialize dram	Fabio Estevam
2012-09-01	imx-common/cmd_bmode.c: add imx bmode (bootmode) command	Troy Kisky
2012-09-01	iomux: move IOMUX_GPR13_xxx defines	Troy Kisky
2012-09-01	mx35: Remove duplicate GPIO3_BASE_ADDR	Benoît Thébaudeau
2012-09-01	mx3: Fix typo on IPU_CONF_CSI_EN	Benoît Thébaudeau
2012-09-01	mx35: Fix typo on EDIO	Benoît Thébaudeau
2012-09-01	rtc: add support of mx27 rtc	trem
2012-09-01	mxs: Convert sys_proto.h prefixes to 'mxs'	Otavio Salvador
2012-09-01	mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h	Otavio Salvador
2012-09-01	video: support exynos pwm backlight driver	Donghwa Lee
2012-09-01	video: exynos fb driver supports display port feature	Donghwa Lee
2012-09-01	video: support exynos display port drivers	Donghwa Lee
2012-09-01	EXYNOS5: add display port base address	Donghwa Lee
2012-09-01	EXYNOS5: support display port phy control function	Donghwa Lee
2012-09-01	video: support exynos fimd driver for various exynos series	Donghwa Lee
2012-09-01	EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	EXYNOS5: CLOCK: Add BPLL support	Rajeshwari Shinde
2012-09-01	EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	ARCH: SPL: Add parametric board initializer	Rajeshwari Shinde
2012-09-01	ARM: add tegra20 support to arm720t	Allen Martin
2012-09-01	tegra20: rename tegra2 -> tegra20	Allen Martin
2012-09-01	ARM: add basic support for the Broadcom BCM2835 SoC	Stephen Warren
2012-09-01	u8500: Enabling power to MMC device on AB8500 V2	Mathieu J. Poirier
2012-09-01	u8500: Moving processor-specific functions to cpu area.	Mathieu J. Poirier
2012-09-01	snowball: applying power to LAN and GBF controllers	Mathieu J. Poirier
2012-09-01	snowball: Moving to ux500.v2 addess scheme for PRCMU access	Mathieu J. Poirier
2012-09-01	snowball: Adding CPU clock initialisation	Mathieu J. Poirier
2012-09-01	snowball: Adding architecture dependent initialisation	Mathieu J. Poirier
2012-09-01	u8500: Moving prcmu to cpu directory	Mathieu J. Poirier
2012-09-01	snowball: Add support for ux500 based snowball board	Mathieu J. Poirier
2012-09-01	am33xx evm: Update secure_emif_sdram_config during ddr init	Satyanarayana, Sandhya
2012-09-01	da8xx/hawkboard: Add support for ohci host controller	Sughosh Ganu
2012-09-01	omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms	Tom Rini
2012-09-01	am33xx: Correct MMC1, remove MMC2 support	Tom Rini
2012-09-01	mxs: Reowork SPL to use 'mxs' prefix for methods	Otavio Salvador
2012-09-01	mxs: prefix register structs with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: prefix register acessor macros with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: reorganize source directory for easy sharing of code in i.MXS SoCs	Otavio Salvador
2012-09-01	MX28: extend print_cpuinfo() to use chip information	Otavio Salvador
2012-09-01	arm : Atmel : add at91sam9x5ek board support	Bo Shen
2012-09-01	DaVinci DA8xx: replace magic number for DDR speed	Laurence Withers
2012-09-01	DaVinci DA850: UART2 clock ID comes from ASYNC3	Laurence Withers
2012-09-01	DaVinci DA8xx: tidy up clock ID definition	Laurence Withers
2012-09-01	am33xx: Rework pinmux functions	Tom Rini
2012-09-01	am33xx: Add support for TI AM335x StarterKit EVM	Tom Rini
2012-09-01	am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support	Tom Rini