index
:
uboot-2021-rebase.git
am335x_som_revival
uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som_revival
git repository hosting
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
arch
/
arm
/
include
Age
Commit message (
Expand
)
Author
2012-09-01
EXYNOS5: add display port base address
Donghwa Lee
2012-09-01
EXYNOS5: support display port phy control function
Donghwa Lee
2012-09-01
video: support exynos fimd driver for various exynos series
Donghwa Lee
2012-09-01
EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
Rajeshwari Shinde
2012-09-01
EXYNOS5: CLOCK: Add BPLL support
Rajeshwari Shinde
2012-09-01
EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
Rajeshwari Shinde
2012-09-01
Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
Rajeshwari Shinde
2012-09-01
EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
Rajeshwari Shinde
2012-09-01
ARCH: SPL: Add parametric board initializer
Rajeshwari Shinde
2012-09-01
ARM: add tegra20 support to arm720t
Allen Martin
2012-09-01
tegra20: rename tegra2 -> tegra20
Allen Martin
2012-09-01
ARM: add basic support for the Broadcom BCM2835 SoC
Stephen Warren
2012-09-01
u8500: Enabling power to MMC device on AB8500 V2
Mathieu J. Poirier
2012-09-01
u8500: Moving processor-specific functions to cpu area.
Mathieu J. Poirier
2012-09-01
snowball: applying power to LAN and GBF controllers
Mathieu J. Poirier
2012-09-01
snowball: Moving to ux500.v2 addess scheme for PRCMU access
Mathieu J. Poirier
2012-09-01
snowball: Adding CPU clock initialisation
Mathieu J. Poirier
2012-09-01
snowball: Adding architecture dependent initialisation
Mathieu J. Poirier
2012-09-01
u8500: Moving prcmu to cpu directory
Mathieu J. Poirier
2012-09-01
snowball: Add support for ux500 based snowball board
Mathieu J. Poirier
2012-09-01
am33xx evm: Update secure_emif_sdram_config during ddr init
Satyanarayana, Sandhya
2012-09-01
da8xx/hawkboard: Add support for ohci host controller
Sughosh Ganu
2012-09-01
omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
Tom Rini
2012-09-01
am33xx: Correct MMC1, remove MMC2 support
Tom Rini
2012-09-01
mxs: Reowork SPL to use 'mxs' prefix for methods
Otavio Salvador
2012-09-01
mxs: prefix register structs with 'mxs' prefix
Otavio Salvador
2012-09-01
mxs: prefix register acessor macros with 'mxs' prefix
Otavio Salvador
2012-09-01
mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
2012-09-01
MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
2012-09-01
arm : Atmel : add at91sam9x5ek board support
Bo Shen
2012-09-01
DaVinci DA8xx: replace magic number for DDR speed
Laurence Withers
2012-09-01
DaVinci DA850: UART2 clock ID comes from ASYNC3
Laurence Withers
2012-09-01
DaVinci DA8xx: tidy up clock ID definition
Laurence Withers
2012-09-01
am33xx: Rework pinmux functions
Tom Rini
2012-09-01
am33xx: Add support for TI AM335x StarterKit EVM
Tom Rini
2012-09-01
am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support
Tom Rini
2012-09-01
am33xx: Correct and clean up ddr_regs struct
Tom Rini
2012-09-01
am33xx: Do not touch 'ratio1' fields
Tom Rini
2012-09-01
am33xx: Rework config_io_ctrl slightly
Tom Rini
2012-09-01
am33xx: Use emif_regs struct for storing initialization values
Tom Rini
2012-09-01
am33xx: Turn a number of 'int' functions to 'void'
Tom Rini
2012-09-01
am33xx: Document what we're doing with ddrctrl->ddrckectrl
Tom Rini
2012-09-01
am335x: ddr_defs: Update EMIF parameters
Vaibhav Bedia
2012-09-01
am33xx: Clean up unused DDR defines, prefix more with 'DDR2'
Tom Rini
2012-09-01
am33xx: Move the call to ddr_pll_config, make it take the frequency
Tom Rini
2012-09-01
am33xx: Pass to config_ddr the type of memory that is connected
Tom Rini
2012-09-01
am33xx: Make config_cmd_ctrl / config_ddr_data take const structs
Tom Rini
2012-09-01
am33xx: Convert to using <asm/emif.h> to describe the EMIF
Tom Rini
2012-09-01
am33xx: Remove DMM_BASE define
Tom Rini
2012-09-01
OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
Javier Martinez Canillas
[next]