summaryrefslogtreecommitdiff
path: root/arch/arm/include
AgeCommit message (Expand)Author
2012-05-15arm: omap5: correct boot device mode7 for eMMCBalaji T K
2012-05-15OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.SRICHARAN R
2012-05-15OMAP4/5: device: Add support to get the device type.SRICHARAN R
2012-05-15OMAP4/5: Make the sysctrl structure commonSRICHARAN R
2012-05-15OMAP5: SRAM: Change the SRAM base address.SRICHARAN R
2012-05-15OMAP4/5: Make the silicon revision variable common.SRICHARAN R
2012-05-15OMAP5: palmas: Configure nominal opp vdd valuesSRICHARAN R
2012-05-15OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.SRICHARAN R
2012-05-15OMAP5: io: Configure the io settings for omap5430 sevm board.SRICHARAN R
2012-05-15OMAP5: board: Add pinmux data for omap5_evm board.SRICHARAN R
2012-05-15OMAP5: clocks: Change clock settings as required for ES1.0 silicon.SRICHARAN R
2012-05-15OMAP4460: TPS Ensure SET1 is selected after voltage configurationNishanth Menon
2012-05-15OMAP3+: Introduce generic logic for OMAP voltage controllerNishanth Menon
2012-05-15ARM:OMAP+:MMC: Add parameters to MMC initJonathan Solnit
2012-05-15serial: add LPC32X0 high-speed UART devices supportVladimir Zapolskiy
2012-05-15arm926ejs: add NXP LPC32x0 cpu series supportVladimir Zapolskiy
2012-04-24i2c: Add support for designware i2c controllerVipin KUMAR
2012-04-16DMA: Split the APBH DMA init into block and channel initMarek Vasut
2012-04-16imx: Remove unneeded/repititive definitions from imx headersVikram Narayanan
2012-04-16i.MX6: define CACHELINE_SIZEEric Nelson
2012-03-29tegra: i2c: Add I2C driverYen Lin
2012-03-29tegra: Enhance clock support to handle 16-bit clock divisorsSimon Glass
2012-03-29tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASESimon Glass
2012-03-29tegra: usb: Add support for Tegra USB peripheralSimon Glass
2012-03-29tegra: fdt: Add function to return peripheral/clock IDSimon Glass
2012-03-27EXYNOS: Add structure for Exynos4 DMCChander Kashyap
2012-03-27arm: Add Prep subcommand support to bootmSimon Schwarz
2012-03-27omap-common/spl: Add linux boot to SPLSimon Schwarz
2012-03-27devkit8000/spl: init GPMC for dm9000 in SPLSimon Schwarz
2012-03-27mx6: Read silicon revision from registerFabio Estevam
2012-03-27mx6: Remove duplicate definition of ANATOP_BASE_ADDRFabio Estevam
2012-03-26IXP: Fix GPIO_INT_ACT_LOW_SET()Marek Vasut
2012-03-26SPL: Add YMODEM over UART load supportMatt Porter
2012-03-26Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registersRobert Delien
2012-03-26Introducing 8-bit wide register, mx28_register_8Robert Delien
2012-03-26Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8Robert Delien
2012-03-26usb/ehci: Add USB support for the MX6QWolfgang Grandegger
2012-03-26i.mx28: Added register definitions for DIGCTL registersRobert Delien
2012-03-19USB: Armada100: EHCI Driver for Armada100 SOCsAjay Bhargav
2012-03-19USB: Armada100: Add UTMI PHY interface driverAjay Bhargav
2012-02-27tt01: add video supportHelmut Raiger
2012-02-27net: fec_mxc: add 1000 Mbps selectionTroy Kisky
2012-02-27am33xx: ddr_defs.h: Change DDR timingsChase Maupin
2012-02-27mx6q: Add support for ECSPI through mxc_spi driverEric Nelson
2012-02-27mxc_spi: move machine specifics into CPU headersEric Nelson
2012-02-27mx6q: define GPIO macros for translating between ordinals and port:indexEric Nelson
2012-02-15omap_hsmmc: Wait for CMDI to be clearTom Rini
2012-02-12Changes to move hawkboard to the new spl infrastructureSughosh Ganu
2012-02-12ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definitionPeter Barada
2012-02-12davinci: add support for printing clock frequencyHadli, Manjunath