summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mx7
AgeCommit message (Collapse)Author
2019-10-13Add i.MX7D based Meerkat96 board supportShawn Guo
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-08imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HABStefano Babic
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-24psci: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: arch/arm/mach-stm32mp/psci.c: warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes] Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-23Convert to use fsl_esdhc_imx for i.MX platformsYangbo Lu
Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-11Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imxTom Rini
u-boot-imx-20190612 -------------------- - Board fixes: - imx6logic - wandboard - mx6sabre boots again - imx8qm_mek - pico-* boards - Toradex apalis / colibri - engicam imx6 (environment) - KP MX53 - opos6ul - Switch to DM: - vining2000 - dh MX6 - Toradex colibri i.MX7 - Novena - Security : fix CSF size for HAB - Other: - imx: fix building for i.mx8 without spl - pcie and switch to DM mx6sabreauto: Enable SPL SDP support
2019-06-11pico-imx7d: Correct uart clock rootJun Nie
Correct uart clock root ID. Incorrect ID may result the clock is gated because rate value 0 is returned in imx_get_uartclk() The ID can be ignored if CONFIG_SKIP_LOWLEVEL_INIT is not enabled because init_clk_uart() will enable all uart clocks in that case. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-06-11imx: mx7: Skip secure init in arch_cpu_initJun Nie
Skip secure related initialization in arch_cpu_init if low level init is skipped. Because these should be done in early stage firmware, such as ARM trusted firmware. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-06-04video: mxsfb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to mxsfb device. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-01-28mx7: Do not call lcdif_power_down() in the SPL caseFabio Estevam
Like it was done on imx6 in commit 9236269de57d ("imx: mx6: Fix implementantion reset_misc") Do not call lcdif_power_down() in the SPL case to fix the following build error: LD spl/u-boot-spl MKIMAGE u-boot.img arch/arm/mach-imx/built-in.o: In function `reset_misc': /home/fabio/ossystems/u-boot/arch/arm/mach-imx/mx7/soc.c:372: undefined reference to `lcdif_power_down' scripts/Makefile.spl:375: recipe for target 'spl/u-boot-spl' failed Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx: mx7: avoid some initialization if low level is skippedRui Miguel Silva
We can have the case where u-boot is launched after some other low level enabler, like for example when u-boot runs after arm-trusted-firmware and/or optee. So, because of that we may need to jump the initialization of some IP blocks even because we may no longer have the permission for that. So, if the config option to skip low level init is set disable also timer, board and csu initialization. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: u-boot@lists.denx.de Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-09imx: mx7: fix potential overflow in imx_ddr_size()Marcel Ziswiler
The imx_ddr_size() function may overflow as it is possible to kind of over provision the DDR controller. Fix this by capping it to 2 GB which is the maximum allowed size as per reference manual. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04imx: mx7: add system suspend/resume supportAnson Huang
This patch adds system suspend/resume support, when linux kernel enters deep sleep mode, SoC will go into below mode: - CA7 platform goes into STOP mode; - SoC goes into DSM mode; - DDR goes into self-refresh mode; - CPU0/SCU will be powered down. When wake up event arrives: - SoC DSM mdoe exits; - CA7 platform exit STOP mode, SCU/CPU0 power up; - Invalidate L1 cache; - DDR exit self-refresh mode; - Do secure monitor mode related initialization; - Jump to linux kernel resume entry. Belwo is the log of 1 iteration of system suspend/resume: [ 338.824862] PM: suspend entry (deep) [ 338.828853] PM: Syncing filesystems ... done. [ 338.834433] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 338.842939] OOM killer disabled. [ 338.846182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 338.869717] PM: suspend devices took 0.010 seconds [ 338.877846] Disabling non-boot CPUs ... [ 338.960301] Retrying again to check for CPU kill [ 338.964953] CPU1 killed. [ 338.968104] Enabling non-boot CPUs ... [ 338.973598] CPU1 is up [ 339.267155] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 339.275833] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 339.284158] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) [ 339.385065] PM: resume devices took 0.400 seconds [ 339.389836] OOM killer enabled. [ 339.392986] Restarting tasks ... done. [ 339.398990] PM: suspend exit The resume entry function has to initialize stack pointer before calling C code, otherwise there will be an external abort occur, in additional, invalidate L1 cache must be done in secure section as well, so this patch also adds assembly code back and keep it as simple as possible. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch>
2018-09-04imx: mx7: add gpc initialization for low power modeAnson Huang
Add i.MX7D GPC initialization for low power mode support like system suspend/resume from linux kernel: - Pending IOMUXC IRQ to workaround GPC state machine issue; - Mask all GPC interrupts for M4/C0/C1; - Configure SCU timing; - Configure time slot ack; - Configure C0/C1 power up/down timing; - Configure wakeup source mechanism; - Disable DSM/RBC related settings. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04imx: mx7: psci: improve cpu hotplug flowAnson Huang
This patch improves cpu hotplug, previous cpu_off implementation is NOT safe, a CPU can NOT power down itself in runtime, it will cause system bus hang due to pending transaction. So need to use other online CPU to kill it when it is ready for killed. Here use SRC parameter register and a magic number of ~0 as handshake for killing a offline CPU, when the online CPU checks the psci_affinity_info, it will help kill the offline CPU according to the magic number stored in SRC parameter register. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-07-31dm: Fix CMD_DM enablingMichal Simek
The patch "dm: Change CMD_DM enabling" (sha1: 08a00cba06a7e608ae65e3d7ea225cf8c639429d) was incorrectly updated and PICO_IMX7D is missing imply CMD_DM and WARP7 has it twice. This patch is fixing it. Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-30dm: Change CMD_DM enablingMichal Simek
CMD_DM is used for debug purpose and it shouldn't be enabled by default via Kconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30Kconfig: Sort bool, default, select and imply optionsMichal Simek
Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-23pico-imx7d: Add SPL supportFabio Estevam
Convert pico-imx7d to SPL support. There are two variants of pico-imx7d SOMs: - One with 512MB of RAM - One with 1GB of RAM The 512MB module contains two Hynix H5TC2G63GFR-PBA. The 1GB module contains two Hynix H5TC4G63GFR-PBA. The RAM size is determined in runtime by reading GPIO1_12. While at it, also add USB Serial Download mode support as it is very helpful for loading SPL and u-boot.img via imx_usb_loader. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23imx: mx7: psci: implement MIGRATE_INFO_TYPEStefan Agner
Implement MIGRATE_INFO_TYPE. This informs Linux that no migration for the trusted operating system is necessary: [ 0.000000] psci: Trusted OS migration not required Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23imx: mx7: psci: support CPU0 on/offStefan Agner
So far psci_cpu_(on|off) only worked for CPU1. Allow to control CPU0 too. This allows to run the Linux PSCI checker successfully: [ 2.213447] psci_checker: PSCI checker started using 2 CPUs [ 2.219107] psci_checker: Starting hotplug tests [ 2.223859] psci_checker: Trying to turn off and on again all CPUs [ 2.267191] IRQ21 no longer affine to CPU0 [ 2.293266] Retrying again to check for CPU kill [ 2.302269] CPU0 killed. [ 2.311648] psci_checker: Trying to turn off and on again group 0 (CPUs 0-1) [ 2.354354] IRQ21 no longer affine to CPU0 [ 2.383222] Retrying again to check for CPU kill [ 2.392148] CPU0 killed. [ 2.398063] psci_checker: Hotplug tests passed OK [ 2.402910] psci_checker: Starting suspend tests (10 cycles per state) [ 2.410019] psci_checker: cpuidle not available on CPU 0, ignoring [ 2.416452] psci_checker: cpuidle not available on CPU 1, ignoring [ 2.422757] psci_checker: Could not start suspend tests on any CPU [ 2.429370] psci_checker: PSCI checker completed Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23imx: mx7: psci: provide complete PSCI 1.0 implementationStefan Agner
PSCI 1.0 require PSCI_VERSION, PSCI_FEATURES, AFFINITY_INFO and CPU_SUSPEND to be implemented. Commit 0ec3d98f7692 ("mx7_common: use psci 1.0 instead of 0.1") marked the i.MX 7 implementation to be PSCI 1.0 compliant but failed to implement those functions. Especially the missing PSCI version callback was noticeable when booting Linux: [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv65535.65535 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 This patch provides a minimal implementation thereof. With this patch applied Linux detects PSCI 1.0: [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 Fixes: 0ec3d98f7692 ("mx7_common: use psci 1.0 instead of 0.1") Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23imx: mx7: psci: use C code exclusivelyStefan Agner
There is no need for assembly in the platform specific part of the PSCI implementation. Note that this does not make it a complete PSCI 1.0 implementation yet but aids to do so in upcoming patches. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23mx7: Remove BMODE supportFabio Estevam
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platformsYe Li
According to the Cortex-A7 TRM, for ACTLR.SMP bit "You must ensure this bit is set to 1 before the caches and MMU are enabled, or any cache and TLB maintenance operations are performed". ROM sets this bit in normal boot flow, but when in serial download mode, it is not set. Here we add it in u-boot as a common flow for all i.MX cortex-a7 platforms, including mx7d, mx6ul/ull and mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> [fabio: adapted to U-Boot mainline codebase and make checkpatch happy] Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-07imx7: psci: save context id in cpu_on commandPatrick Delaunay
Replace the psci_save_target_pc call by the new function psci_save(cpu, pc,context_id) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15imx: mx7: snvs: Add an SNVS init routineBryan O'Donoghue
Working with HAB on the i.MX7 we've encountered a case where a board that successfully authenticates u-boot when booting Linux via OPTEE subsequently fails to properly bring up the RTC. The RTC registers live in the low-power block of the Secure Non-Volatile Storage (SNVS) block. The root cause of the error has been traced to the HAB handing off the SNVS-RTC in a state where HPCOMR::NPSWA_EN = 0 in other words where the Non-Privileged Software Access Enable bit is zero. In ordinary circumstances this is OK since we typically do not run in TZ mode, however when we boot via HAB and enablng TrustZone, it is required to set HPCOMR::NPSWA_EN = 1 in order for the upstream Linux driver to have sufficient permissions to manipulate the SNVS-LP block. On our reference board it is the difference between Linux doing this: root@imx7s-warp-mbl:~# dmesg | grep rtc snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034 snvs_rtc_enable read 0x00000021 from SNVS_LPCR @ 0x00000038 snvs_rtc_enable read 0x00000000 from SNVS_HPLR @ 0x00000000 snvs_rtc_enable read 0x80002100 from SNVS_HPCOMR @ 0x00000004 snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered 30370000.snvs:snvs-rtc-lp as rtc0 snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to2018-04-01 00:51:04 UTC (1522543864) and doing this: root@imx7s-warp-mbl:~# dmesg | grep rtc snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034 snvs_rtc_enable read 0x00000020 from SNVS_LPCR @ 0x00000038 snvs_rtc_enable read 0x00000001 from SNVS_HPLR @ 0x00000000 snvs_rtc_enable read 0x00002020 from SNVS_HPCOMR @ 0x00000004 snvs_rtc 30370000.snvs:snvs-rtc-lp: failed to enable rtc -110 snvs_rtc: probe of 30370000.snvs:snvs-rtc-lp failed with error -110 hctosys: unable to open rtc device (rtc0) Note bit 1 of LPCR is not set in the second case and is set in the first case and that bit 31 of HPCOMR is set in the second case but not in the first. Setting NPSWA_EN in HPCOMR allows us to boot through enabling TrustZone and continue onto the kernel. The kernel then has the necessary permissions to set LPCR::SRTC_ENV (RTC enable in the LP command register) whereas in contrast - in the failing case the non-privileged kernel cannot do so. This patch adds a simple init_snvs() call which sets the permission-bit called from soc.c for the i.MX7. It may be possible, safe and desirable to perform this on other i.MX processors but for now this is only tested on i.MX7 as working. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-04-15imx: mx7: Add comment to describe OTP TESTER registersBryan O'Donoghue
The tester registers provide a unique chip-level identifier which get_board_serial() returns in a "struct tag_serialnr". This patch documents the properties of the registers; in summary. 31:0 OCOTP_TESTER0 (most significant) - FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID OCOTP_TESTER1 (least significant) 31:24 - The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID 23:16 - The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID 15:11 - The wafer number of the wafer on which the device was fabricated/SJC CHALLENGE/ Unique ID 10:0 - FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID The 64 bits of data generate a unique serial number per-chip. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-15imx: mx7: Fix CONFIG_SERIAL_TAG compilationBryan O'Donoghue
Currently when we define CONFIG_SERIAL_TAG we will barf with a failure to define "struct tag_serialnr". This structure is defined in <asm/setup.h>, this patch includes <asm/setup.h> to fix. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04imx: mx7: run sec_init for CAAM RNGBryan O'Donoghue
This patch adds a sec_init call into arch_misc_init(). Doing so in conjunction with the patch "drivers/crypto/fsl: assign job-rings to non-TrustZone" enables use of the CAAM in Linux when OPTEE/TrustZone is active. u-boot will initialise the RNG and assign ownership of the job-ring registers to a non-TrustZone context. With recent changes by Lukas Auer to fully initialize the RNG in sec_init() this means that u-boot will hand-off the CAAM in a state that Linux then can use the CAAM without touching the reserved DECO registers. This change is safe both for the OPTEE/TrustZone boot path and the regular non-OPTEE/TrustZone boot path. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04imx: mx7: move mmc env code to mmc_env.cPeng Fan
The mx7 mmc env code is shared by i.MX8M, so move it to mmc_env.c. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-02-04imx: mx7: move get_boot_device to cpu.cPeng Fan
Move get_boot_device to cpu.c to prepare adding i.MX8M support, because i.MX8M share same code with i.MX7. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04imx: cleanup bootauxPeng Fan
Move i.MX6/7 bootaux code to imx_bootaux.c. The i.MX6/7 has different src layout, so define M4 reg offset to ease the cleanup. Redefine the M4 related BIT for share common code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04imx: refactor imx_get_mac_from_fusePeng Fan
Move imx_get_mac_from_fuse to a new mac.c for i.MX6/7. Since fuse regs structure are different for i.MX6/7, use mac address offset in code and define a new local struture imx_mac_fuse. Also sort the config order. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04imx: cpu: move speed/temp to common cpuPeng Fan
The i.MX7 cpu speed/temp code could be reused on i.MX8M, so move them to common cpu code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04imx: mx7: psci: add system power off supportAnson Huang
Add i.MX7 PSCI system power off support, linux kernel can use "poweroff" command to power off system via SNVS, PMIC power will be disabled. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-02-04imx: mx7: psci: add system reset supportAnson Huang
Add i.MX7 PSCI system reset support, linux kernel can use "reboot" command to reset system even wdog driver is disabled in kernel. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-01-12arm: imx: Rework i.MX specific commands to be excluded from SPLTom Rini
The "clocks" and "bootaux" commands are only usable in full U-Boot, not SPL, so do not link them inside of SPL. Rework a little of the bootaux related code to make use of __weak and declare parts of it static as it's local to the file. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08imx: move CONFIG_SYSCOUNTER_TIMER to KconfigStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29imx: Kconfig: Add HAS_CAAM optionBreno Lima
Currently CONFIG_SECURE_BOOT is selecting FSL_CAAM for all i.MX devices, this causes the following error when building mx6sl boards since this SoC doesn't have the CAAM block: In file included from drivers/crypto/fsl/jobdesc.c:12:0: drivers/crypto/fsl/jobdesc.c: In function 'inline_cnstr_jobdesc_blob_dek': include/fsl_sec.h:268:25: error: 'CAAM_ARB_BASE_ADDR' undeclared (first use in this function) #define SEC_MEM_PAGE1 (CAAM_ARB_BASE_ADDR + 0x1000) ^ drivers/crypto/fsl/jobdesc.c:140:21: note: in expansion of macro 'SEC_MEM_PAGE1' memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz); ^ include/fsl_sec.h:268:25: note: each undeclared identifier is reported only once for each function it appears in #define SEC_MEM_PAGE1 (CAAM_ARB_BASE_ADDR + 0x1000) ^ drivers/crypto/fsl/jobdesc.c:140:21: note: in expansion of macro 'SEC_MEM_PAGE1' memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz); ^ scripts/Makefile.build:280: recipe for target 'drivers/crypto/fsl/jobdesc.o' failed make[3]: *** [drivers/crypto/fsl/jobdesc.o] Error 1 scripts/Makefile.build:425: recipe for target 'drivers/crypto/fsl' failed make[2]: *** [drivers/crypto/fsl] Error 2 scripts/Makefile.build:425: recipe for target 'drivers/crypto' failed make[1]: *** [drivers/crypto] Error 2 Add HAS_CAAM configuration to avoid this error. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-27imx: Remove boolean parameter from wdog powerdown functionFabio Estevam
imx_set_wdog_powerdown() is always used to disable the power down enable bit, so remove the boolean parameter of the function. It is also a bit strange to write a boolean value into registers, so this new version makes explicit that we are writing 0. While at it, rename it to imx_wdog_disable_powerdown(). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12arm: imx7d: add support for Compulab cl-som-imx7Ilya Ledvich
Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12imx: mx7: DDR controller configuration for the i.MX7 architectureUri Mashiach
The configuration files imximage.cfg are used for the DDR controller configuration. Add DDR configuration function to replace the DDR controller configuration in the imximage.cfg file. The function can be used for DDR size detection. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-09-18imx: imx7d: remove CamelCase from ENET_xMHz macrosEric Nelson
Update these macros to use all upper-case to avoid checkpatch warnings: ENET_25MHz, ENET_50MHz, ENET_125MHz, Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-23imx: mx7: psci: add copyright and licensePeng Fan
Add copyright and license header. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-08-16Merge git://www.denx.de/git/u-boot-imxTom Rini
Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16env: Rename setenv() to env_set()Simon Glass
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16imx: mx7: fix build warning when CONFIG_IMX_RDC not enabledPeng Fan
Fix build warning when CONFIG_IMX_RDC not defined in defconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-15env: Convert CONFIG_ENV_IS_IN... to a choiceSimon Glass
At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-26 10:52:44 +0000