summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
AgeCommit message (Collapse)Author
2020-04-22spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()Harald Seiler
The function's name is misleading as one might think it is used generally to select the boot-mode when in reality it is only used by the MMC driver to find out in what way it should try reading U-Boot Proper from a device (either using a filesystem, a raw sector/partition, or an eMMC boot partition). Rename it to spl_mmc_boot_mode() to make it more obvious what this function is about. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-20Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-04-18Add support for i.MXRT1020-EVK boardGiulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18Add i.MXRT1020 supportGiulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-17arch: arm: tqma6: apply default Kconfig for device modelMichael Krummsdorf
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
2020-04-17arm: imx6: configure NoC on i.MX6DQPBernhard Messerklinger
The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Co-developed-by: Filip Brozović <fbrozovic@gmail.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-04-17mx7ulp: Only enable LDO if it is not already enabledFabio Estevam
LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang. Avoid this problem by only enabling LDO mode if it is initially disabled. Reported-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx7ulp: Remove duplicated definitionsFabio Estevam
These PMC0 definitions are already defined in the beginning of the file, so remove the duplication. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-16arm: imx: update reference to README.mxc_habPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.mxc_hab => doc/imx/habv4/* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-13Merge branch 'next'Tom Rini
Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
2020-04-09imx: Fix imx8m FIT script issueYe Li
The FIT config node has reversed ATF and u-boot: ATF is set to 'firmware' but u-boot is set to 'loadables'. This script can work previously because spl fit driver wrongly appends fdt to all loadable images. With the issue fixed in commit 9d15d1d1c24f ("Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"") the u-boot in 'loadables' does not have fdt appended and fails to work. So correct the script by moving u-boot to 'firmware' and ATF to 'loadables'. Signed-off-by: Ye Li <ye.li@nxp.com> Reported-by: Matt Porter <mporter@konsulko.com> Tested-by: Matt Porter <mporter@konsulko.com>
2020-03-17Merge tag 'ti-v2020.07-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm
2020-03-10Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
2020-03-09imx8mm/mn: Add missing root clock entry for ARM core clockFrieder Schrempf
The current implementation in arch/arm/mach-imx/cpu.c uses non-DM code to retrieve the core clock frequency. As the root clock is not listed we currently get: CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Fix this by adding the missing entry, which results in: CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: Makefile: added missing ahab.oOliver Graute
added missing ahab.o in Makefile Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementationFaiz Abbas
The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-03lib: elf: Move the generic elf loading/validating functions to libKeerthy
Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-09ARM: imx: novena: Enable DM ethernetMarek Vasut
Convert to DM ethernet to prevent board removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09ARM: imx: novena: Move defconfig bits to arch KconfigMarek Vasut
Just move the defconfig entries which are required into the Novena entry in arch Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09board: toradex: Add Verdin iMX8M Mini supportIgor Opaniuk
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-01-26clock_imx8mq: Make frac_pll_init() staticPedro Jardim
Since frac_pll_init() is only used in this file, change it to 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:662:5: warning: no previous prototype for ‘frac_pll_init’ [-Wmissing-prototypes] Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Remove the function sscg_pll_init()Pedro Jardim
Function sscg_pll_init() is not used anywhere, so it can simply be deleted. This was found because of the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:702:5: warning: no previous prototype for ‘sscg_pll_init’ [-Wmissing-prototypes] int sscg_pll_init(u32 pll) ^~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Make do_imx8m_showclocks() staticPedro Jardim
Since do_imx8m_showclocks() is only used inside this file, make it 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:836:5: warning: no previous prototype for ‘do_imx8m_showclocks’ [-Wmissing-prototypes] int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Delete not used init_usb_clk()Pedro Jardim
Function init_usb_clk() is not used anywhere, so it can simply be deleted. This was detected by the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:377:6: warning: no previous prototype for ‘init_usb_clk’ [-Wmissing-prototypes] void init_usb_clk(void) ^~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-21Merge tag 'u-boot-imx-20200121' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-20imx8m: clock_imx8mm: Staticize functionsAlifer Moraes
Functions fracpll_configure(), decode_intpll(), decode_fracpll(), get_root_src_clk() and get_root_clk() are used only in the scope of this file, so make them static to fix the following sparse warnings: arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous prototype for ‘fracpll_configure’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous prototype for ‘decode_intpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous prototype for ‘decode_fracpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous prototype for ‘get_root_src_clk’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous prototype for ‘get_root_clk’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20mx7ulp: soc: s_init should only be executed onceJorge Ramirez-Ortiz
On SPL enabled systems, the current s_init code (wdog, clock and ldo init) is executed twice (by SPL and u-boot). This is not necessary and might lead to boot issues (ie, starting PMC1 when it is already running). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: Add basic support for the NXP IMXRT10xx SoC familyGiulio Benetti
Add i.IMXRT family basic support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: add imx8x based deneb boardAnatolij Gustschin
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14imx: add imx8x capricorn giedi boardAnatolij Gustschin
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add imximage-8mp-lpddr4.cfgPeng Fan
Add imximage-8mp-lpddr4.cfg for imximage usage, almost same as i.MX8MN ddr4 cfg, but with different ddr firmware Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: only support non-dm code in clock_imx8mm.cPeng Fan
The drivers/clk/imx/*.c are used for CLK dm case, the clock_imx8mm.c is used for non CLK dm case, let's split it. Sometimes it is hard to enable CLK dm in SPL stage, considering code size, malloc size requirement, the splittion will make it easy to use non CLK dm in SPL stage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MPPeng Fan
i.MX8MP ROM support ROMAPI as i.MX8MN, so make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add 1GHz fracpll entryPeng Fan
4000MTS DDR needs 1GHz fracpll, so add the entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8mp: add basic clockPeng Fan
i.MX8MP has similar architecture as i.MX8MN, but it has different clk root and index, so add that to make i.MX8MP could use the non-dm clock driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: spl: support i.MX8MP spl_boot_devicePeng Fan
i.MX8MP follows i.MX8MN, so just let it use spl_board_boot_device Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add Kconfig entry for i.MX8MPPeng Fan
Add Kconfig entry for i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: cpu: enlarge bit mask to 0x1FF for cpu typePeng Fan
i.MX8MP use 0x182 as dummy id, 0xFF is not able the get the highest bit, so enlarge bit mask to 0x1FF to make it could detect cpu type correctly Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx8mp: set BYPASS ID SWAP to avoid AXI bus errorsPeng Fan
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to generated AXI bus errors with TZC380 enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: get cpu id/type of i.MX8MPPeng Fan
Support get i.MX8MP cpu id and cpu type Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-27 21:36:11 +0000