summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-12-06armv8: dts: fsl-ls1046a: add sata node supportPeng Ma
One ls1046a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: fsl-layerscape: add support of MC framework for TFAPankit Garg
Add support of MC framework for TFA Make MC framework independent of boot source. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: sec_firmware: return job ring status as true in TFABOOTPankit Garg
Returns job ring status as true in TFABOOT, as one job ring is always reserved. Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: sec_firmware: change el2_to_aarch32 SMC IDRajesh Bhagat
Changes the el2_to_aarch32 SMC ID from 0xc000ff04 to 0xc200ff17, it is applicable to both TFA and non-TFA boot. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: fsl-layerscape: Update parsing boot sourceYork Sun
Workaround of erratum A010539 clears the RCW source field in PORSR1 register, causing failure of detecting boot source using this method. Use SMC call if U-Boot runs at EL2. If SMC is not implemented or running at EL3, continue to read PORSR1 and presume QSPI as boot source if erratum workaround A010539 is enabled and RCW source is cleared. Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: skip OCRAM init for TFABOOTRajesh Bhagat
OCRAM initialization is performed by TFA, Hence skipped from u-boot. Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: add SMC calls for DDR size and bank infoRajesh Bhagat
Adds SMC calls for getting DDR size and bank info for TFABOOT. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: fsl-layerscape: bootcmd identification for TFABOOTPankit Garg
Adds bootcmd identificaton on basis on boot source, valid in TFABOOT configuration. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> [YS: remove unnecessary braces] Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: remove EL3 specific erratas for TFABOOTRajesh Bhagat
Removes EL3 specific erratas for TFABOOT, And now taken care in TFA. ARM_ERRATA_855873, SYS_FSL_ERRATUM_A008850, SYS_FSL_ERRATUM_A008511, SYS_FSL_ERRATUM_A008336, SYS_FSL_ERRATUM_A009663, SYS_FSL_ERRATUM_A009803, SYS_FSL_ERRATUM_A009942, SYS_FSL_ERRATUM_A010165 Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: fsl-layerscape: identify boot source from PORSR registerRajesh Bhagat
PORSR register holds the cfg_rcw_src field which can be used to identify boot source. Further, it can be used to select the environment location. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [YS: fix multiple checkpatch issues] Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: Add TFABOOT supportRajesh Bhagat
Adds TFABOOT support config option and add generic code to enable execution from DDR. Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2018-12-06armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3Pankit Garg
Change tlb base address from OCRAM to DDR when exception level is less than 3. Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: Enable routing SError exceptionYork Sun
In case SError happens at EL2, if SCR_EL3[EA] is not routing it to EL3, and SCR_EL3[RW] is set to aarch64, setting HCR_EL2[AMO] routes the exception to EL2. Otherwise this exception is not taken. Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add common Rock960 family from VamrsManivannan Sadhasivam
Rock960 is a family of boards based on Rockchip RK3399 SoC from Vamrs. It consists of Rock960 (Consumer Edition) and Ficus (Enterprise Edition) 96Boards. Below are some of the key differences between both Rock960 and Ficus boards: 1. Different host enable GPIO for USB 2. Different power and reset GPIO for PCI-E 3. No Ethernet port on Rock960 The common board support will be utilized by both boards. The device tree has been organized in such a way that only the properties which differ between both boards are placed in the board specific dts and the reset of the nodes are placed in common dtsi file. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [Added instructions for SD card boot] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2018-12-06arm: dts: rockchip: add some common pin-settings to rk3399Randy Li
Those pins would be used by many boards. Commit grabbed from Linux: commit b41023282d07b61a53e2c9b9508912b1e7ce7b4f Author: Randy Li <ayaka@soulik.info> Date: Thu Jun 21 21:32:10 2018 +0800 arm64: dts: rockchip: add some common pin-settings to rk3399 Those pins would be used by many boards. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-04move data structure out of cpu.hYork Sun
Move static definitions to cpu.c file, as it doesn't allow the cpu.h file to be included in multiple c files. Signed-off-by: York Sun <york.sun@nxp.com>
2018-12-04ARM: rmobile: Set environment variable containing CPU typeMarek Vasut
Set environment variable 'platform' containing the CPU type. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-04ARM: rmobile: Enable MMC extensionsMarek Vasut
Enable extended MMC commands and GPT partition table support. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract i2c6 on M2W PorterMarek Vasut
The i2c6 node is missing in mainline Linux thus far, pull it into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SCIF2 node on E3 EbisuMarek Vasut
The SCIF2 node is not in Linux 4.17 DTs on E3, pull it into U-Boot specific DT extras until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI nodes on E3 EbisuMarek Vasut
The SDHI nodes are not in Linux 4.17 DTs in E3, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI extras on H3, M3W, M3N Salvator-XMarek Vasut
The SDHI nodes are missing features supported in upstream U-Boot, like mode support properties. Pull the extras into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCBMarek Vasut
The SDHI nodes are missing features supported in upstream U-Boot, like mode support properties. Pull the extras into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCBMarek Vasut
The CPLD node is missing in Linux 4.17 DTs on H3/M3W ULCB, pull the node into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract AVB node extras on V3M EagleMarek Vasut
The AVB node is not complete in Linux 4.17 DTs on V3M Eagle, pull the AVB node extras into U-Boot specific DT until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI nodes on M3NMarek Vasut
The SDHI nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract USB nodes on M3NMarek Vasut
The USB nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract RPC node to u-boot specific DTMarek Vasut
The RPC DT bindings are still work in progress. Extract the RPC DT node from the DT to allow easier update and so it can be replaced once the DT bindings are stable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Add soc label to Gen3Marek Vasut
Add label to the /soc node, so it can be referenced from the U-Boot DTs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-03Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
2018-12-03Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-12-03 This release is fully packed with lots of glorious improvements in UEFI land again! - Make PE images more standards compliant - Improve sandbox support - Improve correctness - Fix RISC-V execution on virt model - Honor board defined top of ram (fixes a few boards) - Imply DM USB access when distro boot is available - Code cleanups
2018-12-03Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- MMC fixes for R-Car Gen3
2018-12-03arm: baltos: move the board to CONFIG_BLKYegor Yefremov
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03ARM: meson: Add regmap support for clock driverLoic Devulder
This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-12-03ARM: dts: rmobile: Enable HS400 on Salvator-X, ULCB, EbisuMarek Vasut
Enable the HS400 support in DT on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR modes on E3 EbisuMarek Vasut
Add regulators and pinmuxes for SDHI0 and SDHI1 SD and microSD slots on E3 Ebisu and mark them as capable of up to SDR104 mode of operation. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCBMarek Vasut
Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Add eMMC DS pinmuxMarek Vasut
Add pinmux entry for the eMMC DS line, as it is connected on these boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-02efi_loader: PSCI reset and shutdownHeinrich Schuchardt
When an operating system started via bootefi tries to reset or power off this is done by calling the EFI runtime ResetSystem(). On most ARMv8 system the actual reset relies on PSCI. Depending on whether the PSCI firmware resides the hypervisor (EL2) or in the secure monitor (EL3) either an HVC or an SMC command has to be issued. The current implementation always uses SMC. This results in crashes on systems where the PSCI firmware is implemented in the hypervisor, e.g. qemu-arm64_defconfig. The logic to decide which call is needed based on the device tree is already implemented in the PSCI firmware driver. During the EFI runtime the device driver model is not available. But we can minimize code duplication by merging the EFI runtime reset and poweroff code with the PSCI firmware driver. As the same HVC/SMC problem is also evident for the ARMv8 do_poweroff and reset_misc routines let's move them into the same code module. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02arm: efi: Generate Microsoft PE format compliant imagesBin Meng
Per Microsoft PE Format documentation [1], PointerToSymbolTable and NumberOfSymbols should be zero for an image in the COFF file header. Currently the COFF file header is hardcoded on ARM and these two members are not zero. This updates the hardcoded structure to clear these two members, as well as setting the flag IMAGE_FILE_LOCAL_SYMS_STRIPPED so that we can generate compliant *.efi images. [1] https://docs.microsoft.com/zh-cn/windows/desktop/Debug/pe-format Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-01Merge tag 'for-master-20181130' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements: - RK3188 USB-UART functionality - errors triggering a hard-stop in SPL on the RK3399 are reported - Rockchip RV1108 (SoC) support - MicroCrystal RV3029 (RTC) DM driver Fixes: - RK3188 early UART setup - limit SD-card frequency to 40MHz on the RK3399-Q7 - MIPI fixes - RK3399 CPUB clock initialisation
2018-11-30rockchip: rk3188: use board_debug_uart_init() for UART io initKever Yang
Sync with other rockchip SoCs, use board_debug_uart_init() to init default UART iomux. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30rockchip: rk3399: Initialize CPU B clock.Christoph Muellner
This patch sets the PLL of CPU cluster B (BPLL) to 600 MHz. This decreases the boot time of Linux 4.19 by about 8%. The 600 MHz are inspired by the 600 MHz used for LPLL initialization (came in with commit 9f636a249c1). Tested on RK3399-Q7 on Haikou base board. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: dts: rockchip: Add rv1108 USB OTG pinctrlOtavio Salvador
This adds the definitions need to use the USB OTG in rv1108 board. This has been tested using USB Mass Storage to export and program a eMMC device. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: rockchip: rv1108: Add a board_usb_init for USB OTGOtavio Salvador
Like it is done for other Rockchip SoCs, introduce a board_usb_init() function so that USB OTG can be functional on rv1108 too. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: dts: rockchip: Add rv1108 eMMC pinctrlOtavio Salvador
This adds the pinctrl handles to enable the use of eMMC on custom boards (as minievk) and makes it easier for later addition. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2025-01-30 05:39:59 +0000