summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2011-11-08powerpc/85xx: resize the boot page TLB before relocating CCSRTimur Tabi
On some Freescale systems (e.g. those booted from the on-chip ROM), the TLB that covers the boot page can also cover CCSR, which breaks the CCSR relocation code. To fix this, we resize the boot page TLB so that it only covers the 4KB boot page. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: verify the current address of CCSR before relocating itTimur Tabi
Verify that CCSR is actually located where it is supposed to be before we relocate it. This is useful in detecting U-Boot configurations that are broken (e.g. an incorrect value for CONFIG_SYS_CCSRBAR_DEFAULT). If the current value is wrong, we enter an infinite loop, which is handy for debuggers. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: add some missing sync instructions in the CCSR relocation codeTimur Tabi
Calls to tlbwe and tlbsx should be preceded with an isync/msync pair. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: fix some comments in the CCSR relocation codeTimur Tabi
Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: fix definition of MAS register macrosTimur Tabi
Some of the MAS register macros do not protect the parameter with parentheses, which could cause wrong values if the parameter includes operators. Also fix the definition of TSIZE_TO_BYTES() so that it actually uses the parameter. This hasn't caused any problems to date because the parameter was always been 'tsize'. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129chenhui zhao
Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc83xx: powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds powerpc/mpc83xx: Add 512MB DDR support for mpc8360emds mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code mpc83xx: Cleanup usage of LBC constants mpc83xx: Cleanup usage of DDR constants mpc83xx: Cleanup usage of BAT constants mpc83xx: cosmetic: vme8349.h checkpatch compliance mpc83xx: cosmetic: ve8313.h checkpatch compliance mpc83xx: cosmetic: sbc8349.h checkpatch compliance mpc83xx: cosmetic: mpc8308_p1m.h checkpatch compliance mpc83xx: cosmetic: kmeter1.h checkpatch compliance mpc83xx: cosmetic: TQM834x.h checkpatch compliance mpc83xx: cosmetic: SIMPC8313.h checkpatch compliance mpc83xx: cosmetic: MVBLM7.h checkpatch compliance mpc83xx: cosmetic: MPC837XERDB.h checkpatch compliance mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8360ERDK.h checkpatch compliance mpc83xx: cosmetic: MPC8360EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance mpc83xx: cosmetic: MPC8349EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC832XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8315ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8313ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8308RDB.h checkpatch compliance mpc83xx: cosmetic: MERGERBOX.h checkpatch compliance mpc83xx: Fix ipic structure definition powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions cosmetic, powerpc, mpc83xx: checkpatch cleanup powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c mpc83xx: fix global timer structure definition
2011-11-07arch/powerpc/cpu/mpc8260/spi.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: spi.c: In function 'spi_init_r': spi.c:279:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] spi.c: In function 'spi_xfer': spi.c:361:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/bat_rw.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: bat_rw.c: In function 'write_bat': bat_rw.c:38:6: warning: variable 'batn' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andy Fleming <afleming@gmail.com>
2011-11-07mpc8220/i2c.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: i2c.c: In function 'wait_for_bb': i2c.c:109:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8260/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: i2c.c: In function 'i2c_init': i2c.c:221:26: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] i2c.c:221:19: warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8260/i2c.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Also accept some other harmless checkpatch warnings. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8220/fec.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fec.c: In function 'mpc8220_fec_recv': fec.c:733:8: warning: variable 'frame' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8260/speed.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: speed.c: In function 'get_clocks': speed.c:113:30: warning: variable 'cpmdf' set but not used [-Wunused-but-set-variable] speed.c:113:23: warning: variable 'busdf' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/spi.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: spi.c: In function 'spi_init_f': spi.c:144:21: warning: variable 'iop' set but not used [-Wunused-but-set-variable] spi.c:142:22: warning: variable 'cpi' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: WOlfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8xx/i2c.c: CodungStyle cleanupWolfgang Denk
Make (mostly) checkpatch-clean We don't acctually change the code (like convert to use I/O accessors), so there will be some remaining "Use of volatile" warnings from checkpatch. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8xx/cpu.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: cpu.c: In function 'check_CPU': cpu.c:188:8: warning: variable 'mid' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/fec.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: fec.c: In function 'fec_pin_init': fec.c:381:18: warning: variable 'fecp' set but not used [-Wunused-but-set-variable] fec.c: In function 'fec8xx_miiphy_write': fec.c:1013:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Note: The code was slightly rearranged, but no functional changes attempted, i. e. no conversion to use I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/cpu/mpc5xxx/usb_ohci.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:751:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/board.c: fix build warningWolfgang Denk
Fix: board.c: In function 'board_init_r': board.c:633:8: warning: unused variable 's' [-Wunused-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/board.c: make (mostly) checkpatch-cleanWolfgang Denk
CodingStyle cleanup. Accepted (in this cleanup) checkpatch messages: - externs should be avoided (to be cleaned up later) - no spaces at the start of a line (accepted in multi-line #if's) - Macros with complex values (false reports) - do not use assignment in if condition (accepted in one place, where avoiding it would have required an additional level of nesting, resulting in less readable code) Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/cpu/mpc5xxx/i2c.c: fix GC 4.6 build warningsWolfgang Denk
Fix: i2c.c: In function 'wait_for_bb': i2c.c:104:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-03mpc83xx: Cleanup usage of LBC constantsJoe Hershberger
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-03mpc83xx: Cleanup usage of DDR constantsJoe Hershberger
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-03mpc83xx: Fix ipic structure definitionJoe Hershberger
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Added siprr_{b,c} and sepcr for completeness. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-03mpc83xx: fix global timer structure definitionKim Phillips
The byte address distance between GTCFR2 and GTMDR1 is 11, not 10. Reported-by: Shawn Bai <programassem@hotmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-03Reduce build timesWolfgang Denk
U-Boot Makefiles contain a number of tests for compiler features etc. which so far are executed again and again. On some architectures (especially ARM) this results in a large number of calls to gcc. This patch makes sure to run such tests only once, thus largely reducing the number of "execve" system calls. Example: number of "execve" system calls for building the "P2020DS" (Power Architecture) and "qong" (ARM) boards, measured as: -> strace -f -e trace=execve -o /tmp/foo ./MAKEALL <board> -> grep execve /tmp/foo | wc -l Before: After: Reduction: ================================== P2020DS 20555 15205 -26% qong 31692 14490 -54% As a result, built times are significantly reduced, typically by 30...50%. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Albert Aribaud <albert.aribaud@free.fr> cc: Graeme Russ <graeme.russ@gmail.com> cc: Mike Frysinger <vapier@gentoo.org> Tested-by: Graeme Russ <graeme.russ@gmail.com> Tested-by: Matthias Weisser <weisserm@arcor.de> Tested-by: Sanjeev Premi <premi@ti.com> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Macpaul Lin <macpaul@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-034xx_pci.c: add error checking, fix GCC 4.6 build warningWolfgang Denk
Fix: 4xx_pci.c: In function 'pci_init_board': 4xx_pci.c:855:6: warning: variable 'busno' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2011-11-034xx_uart.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: 4xx_uart.c: In function 'get_serial_clock': 4xx_uart.c:204:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de>
2011-11-03arch/powerpc/lib/board.c: fix build warningWolfgang Denk
Commit 1272592 "powerpc: Use getenv_ulong() in place of getenv(), strtoul" instroduced a build warning for some PPC systems: board.c: In function 'board_init_r': board.c:626: warning: unused variable 's' Fix it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2011-10-27GCC4.6: Squash warnings in mpc86xx/interrupts.cMarek Vasut
interrupts.c: In function 'interrupt_init_cpu': interrupts.c:62: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' interrupts.c:69: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:72: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:75: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:79: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' interrupts.c:83: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'volatile uint *' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in ddr[123]_dimm_params.cMarek Vasut
ddr1_dimm_params.c: In function 'compute_ranksize': ddr1_dimm_params.c:44: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'long long unsigned int' ddr2_dimm_params.c: In function 'compute_ranksize': ddr2_dimm_params.c:43: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'long long unsigned int' ddr3_dimm_params.c: In function 'compute_ranksize': ddr3_dimm_params.c:74: warning: format '%16lx' expects type 'long unsigned int', but argument 2 has type 'long long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-27GCC4.6: Squash warnings in 4xx_pcie.cMarek Vasut
4xx_pcie.c: In function 'pcie_read_config': 4xx_pcie.c:268: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'volatile unsigned char *' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in 4xx_ibm_ddr2_autocalib.cMarek Vasut
4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB': 4xx_ibm_ddr2_autocalib.c:910: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c:911: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration': 4xx_ibm_ddr2_autocalib.c:1217: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'ulong' 4xx_ibm_ddr2_autocalib.c:1230: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'ulong' Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-10-27GCC4.6: Squash warnings in 44x_spd_ddr.cMarek Vasut
44x_spd_ddr.c: In function 'program_tr0': 44x_spd_ddr.c:823: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c: In function 'program_tr1': 44x_spd_ddr.c:1054: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c: In function 'program_bxcr': 44x_spd_ddr.c:1127: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' 44x_spd_ddr.c:1196: warning: format '%d' expects type 'int', but argument 5 has type 'long unsigned int' 44x_spd_ddr.c:1242: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in denali_spd_ddr2.cMarek Vasut
denali_spd_ddr2.c: In function 'get_spd_info': denali_spd_ddr2.c:363: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'check_frequency': denali_spd_ddr2.c:390: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'get_dimm_size': denali_spd_ddr2.c:473: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:474: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:475: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:476: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_03': denali_spd_ddr2.c:571: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:604: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:604: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' denali_spd_ddr2.c:643: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:644: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:645: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:646: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:676: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_04': denali_spd_ddr2.c:731: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:733: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:735: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_05': denali_spd_ddr2.c:772: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:774: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_06': denali_spd_ddr2.c:831: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:833: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_11': denali_spd_ddr2.c:860: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_26': denali_spd_ddr2.c:931: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c:933: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_27': denali_spd_ddr2.c:944: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_43': denali_spd_ddr2.c:978: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_spd_ddr2.c: In function 'program_ddr0_44': denali_spd_ddr2.c:1006: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27GCC4.6: Squash warnings in denali_data_eye.cMarek Vasut
denali_data_eye.c: In function 'denali_core_search_data_eye':denali_spd_ddr2.c:646: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_data_eye.c:320: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:330: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_spd_ddr2.c:676: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' denali_data_eye.c:340: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:350: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' denali_data_eye.c:360: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'u32' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27PowerPC: Squash warning in mpc512x serial.cMarek Vasut
serial.c: In function 'serial_setbrg_dev': serial.c:143: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-24powerpc: Correct build warning introduced by getenv_ulong() patchSimon Glass
Commit 1272592 introduced a warning since the variable 's' is no longer always used, depending on the CONFIG options. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23powerpc/lib/board.c: Call run_post(POST_ROM) before relocatingBernhard Kaindl
The call to run_post(POST_ROM) which can run the POST memory test is currently called too late when gd has already been copied to DRAM. This results in failure to boot Linux after a POST_ROM memory test tested all RAM while gd was already relocated to DRAM due to gd being overwritten by the POST_ROM memory test. Support this by moving the call to run_post(POST_ROM) to run earlier, before U-Boot has started to move data to DRAM (from late board_init_f to early board_init_f) where DRAM is initialized, but not used yet. This allows that an POST memory test can test the whole DRAM, including the area where the board info struct is located. Signed-off-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2011-10-23powerpc: Use getenv_ulong() in place of getenv(), strtoulSimon Glass
This changes the board code to use the new getenv_ulong() function. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Roese <sr@denx.de>
2011-10-23powerpc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignmentAnton Staaf
Signed-off-by: Anton Staaf <robotboy@chromium.org> Acked-by: Stefan Roese <sr@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de>
2011-10-22consolidate mdelay by providing a common function for all usersAnatolij Gustschin
There are several mdelay() definitions in the driver and board code. Remove them all and provide a common mdelay() in lib/time.c. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-21mpc85xx: Add inline GPIO acessor functionsKyle Moffett
To ease the implementation of other MPC85xx board ports, several common GPIO helpers are added to <asm/mpc85xx_gpio.h>. Since each of these compiles to no more than 4-5 instructions it would be very inefficient to call them out of line, therefore we put them entirely in the header file. The HWW-1U-1A board port which these were written for strongly prefers to set multiple GPIOs as a single batch operation, so the API is designed around that basis. To assist other board ports, a small set of wrappers are used which provides a standard gpio_request() interface around the MPC85xx-specific functions. This can be enabled with CONFIG_MPC85XX_GENERIC_GPIO Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-20powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)Timur Tabi
The work-around for P4080 erratum SERDES9 says that the SERDES receiver lanes should be reset after the XAUI starts tranmitting alignment signals. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18powerpc/85xx: Update USB device tree status based on pin settingsShengzhou Liu
For P3060 and P4080, USB pins are multiplexed with other functions. Update the device tree status for USB ports based on setting of RCW[EC1] & RCW[EC2] which describe if pins are muxed to usb. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18powerpc/85xx: Add support for RMan LIODN initializationKumar Gala
This patch is intended to initialize RMan LIODN related registers on P2041, P304S and P5020 SocS. It also adds the "rman@0" child node to qman-portal nodes, adds "fsl,liodn" property to RMan inbound block nodes. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18powerpc/85xx: Update device tree handling for SRIOKumar Gala
Update device tree handling for SRIO controller to support updated fsl,srio device tree binding. We handle disabling of individual ports, the whole controller, RMU, and RMAN. Additionally, we setup the SRIO related LIODNs in the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18powerpc/85xx: Update setting of SRIO LIODNsKumar Gala
Properly set the LIODN values associated with SRIO controller. On P4080/P3060 we have an LIODN per port and one for the RMU. On P2041/P3041/P5020 we have 2 LIODNs per port. Update the tables for all of these devices to properly handle both styles. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2025-01-29 08:05:46 +0000