summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2011-11-29powerpc/85xx: always implement the work-around for Erratum SATA_A001Timur Tabi
On the P1022/P1013, the work-around for erratum SATA_A001 was implemented only if U-Boot initializes SATA, but SATA is not initialized by default. So move the work-around to the CPU initialization function, so that it's always executed on the SOCs that need it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.hTimur Tabi
Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/85xx: Add workaround for erratum A-003474York Sun
Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/85xx: fixup flexcan device tree clock-frequencyJia Hongtao
Make the fixup matchable with dts and kernel. Update the compatible from "fsl,flexcan-v1.0" to "fsl,p1010-flexcan" and Change the "clock-freq" property to "clock-frequency". We also change flexcan frequency from CCB-clock to CCB-clock/2 according to P1010 spec. We now keep the old interfaces to make previous kernel work. They should be removed in the future. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/85xx: Add workaround for erratum CPU-A003999Kumar Gala
Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16mpc83xx: spd_sdram - fix gcc 4.6 compiler warningKim Phillips
Configuring for sbc8349 board... spd_sdram.c: In function 'spd_sdram': spd_sdram.c:152:41: warning: variable 'trfc_high' set but not used [-Wunused-but-set-variable] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-16iop480_uart.c: Fix GCC 4.6 build warningsStefan Roese
Fix: iop480_uart.c: In function 'serial_init': iop480_uart.c:137:16: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1640x_spd_sdram.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 40x_spd_sdram.c: In function 'spd_sdram': 40x_spd_sdram.c:137:6: warning: variable 'sdram0_b3cr' set but not used [-Wunused-but-set-variable] 40x_spd_sdram.c:136:6: warning: variable 'sdram0_b2cr' set but not used [-Wunused-but-set-variable] 40x_spd_sdram.c:129:6: warning: variable 'sdram0_ecccfg' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1644x_spd_ddr2.c: Fix GCC 4.6 build warningsStefan Roese
44x_spd_ddr2.c: In function 'initdram': 44x_spd_ddr2.c:450:17: warning: variable 'dimm_spd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c: In function 'program_copt1': 44x_spd_ddr2.c:1003:16: warning: variable 'ddrtype' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c: In function 'DQS_calibration_process': 44x_spd_ddr2.c:2498:7: warning: variable 'window_found' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2497:16: warning: variable 'end_rffd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2496:16: warning: variable 'end_rqfd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2495:16: warning: variable 'begin_rffd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2494:16: warning: variable 'begin_rqfd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2493:7: warning: variable 'min_end' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1644x_spd_ddr.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 44x_spd_ddr.c: In function 'program_cfg0': 44x_spd_ddr.c:384:16: warning: variable 'dimm_64bit' set but not used [-Wunused-but-set-variable] 44x_spd_ddr.c:383:16: warning: variable 'dimm_32bit' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_ecctest.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_ecctest.c: In function 'inject_ecc_error': cmd_ecctest.c:116:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] cmd_ecctest.c: In function 'rewrite_ecc_parity': cmd_ecctest.c:154:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_ibm_ddr2_autocalib.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_ibm_ddr2_autocalib.c: In function 'get_membase': 4xx_ibm_ddr2_autocalib.c:157:8: warning: variable 'bxcf' set but not used [-Wunused-but-set-variable] 4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB': 4xx_ibm_ddr2_autocalib.c:722:8: warning: variable 'rffd' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_pcie.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_pcie.c: In function 'pcie_read_config': 4xx_pcie.c:230:6: warning: variable 'address' set but not used [-Wunused-but-set-variable] 4xx_pcie.c: In function 'pcie_write_config': 4xx_pcie.c:290:6: warning: variable 'address' set but not used [-Wunused-but-set-variable] 4xx_pcie.c: In function 'ppc4xx_setup_pcie_rootpoint': 4xx_pcie.c:1066:17: warning: variable 'rmbase' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16usb_ohci.c: Fix GCC 4.6 build warningsStefan Roese
Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:756:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16arch/powerpc/cpu/mpc512x/i2c.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: i2c.c: In function 'wait_for_bb': i2c.c:81:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16arch/powerpc/cpu/mpc512x/pci.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: pci.c: In function 'pci_init_board': pci.c:55:26: warning: variable 'pci_conf' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
* 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-15font: split font data from video_font.hChe-Liang Chiou
While video_font.h is useful even without referencing the font data, it is not possible to be included multiple times because it defines font data array right in the header. This patch splits the font data array into video_font_data.h and so now video_font.h can be included multiple times. This at least solves the code duplication in board/mcc200/lcd.c. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-11arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warningKumar Gala
Fix: ctrl_regs.c: In function 'set_ddr_sdram_cfg_2': ctrl_regs.c:641:15: warning: variable 'rcw_en' set but not used [-Wunused-but-set-variable] ctrl_regs.c: In function 'compute_fsl_memctl_config_regs': ctrl_regs.c:951:31: warning: array subscript is above array bounds [-Warray-bounds] ctrl_regs.c:752:34: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warningKumar Gala
Fix: fsl_corenet_serdes.c: In function 'fsl_serdes_init': fsl_corenet_serdes.c:511:8: warning: variable 'buf' set but not used [-Wunused-but-set-variable] fsl_corenet_serdes.c:498:18: warning: variable 'lane_prtcl' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warningKumar Gala
Fix: options.c: In function 'populate_memctl_options': options.c:486:28: warning: variable 'pdodt' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warningKumar Gala
Fix: fsl_lbc.c: In function 'upmconfig': fsl_lbc.c:110:9: warning: variable 'mdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warningKumar Gala
Fix: tlb.c: In function 'disable_tlb': tlb.c:175:34: warning: variable '_mas7' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warningKumar Gala
Fix: cpu_init.c: In function 'cpu_init_r': cpu_init.c:320:7: warning: variable 'l2srbar' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399Poonam Aggrwal
Wrong pointer was being used to copy code into L2SRAM. Also removed the unreferenced variable l2srbar. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: Add support for Book-E MMU Arch v2.0Kumar Gala
A few of the config registers changed definition between MMU v1.0 and MMUv2.0. The new e6500 core from Freescale implements v2.0 of the architecture. Specifically, how we determine the size of TLB entries we support in the variable size (or TLBCAM/TLB1) array is specified in a new register (TLBnPS - TLB n Page size) instead of via TLBnCFG. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: Fix warning for USB device-fixupRamneek Mehresh
Fix USB device-fixup warning "node not found". This was occuring because of static nature of start_offset variable Static start_offset was storing offset of last node modified, and was becoming issue if node fixup is carried multiple times, resulting in "node not found" warning Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: resize the boot page TLB before relocating CCSRTimur Tabi
On some Freescale systems (e.g. those booted from the on-chip ROM), the TLB that covers the boot page can also cover CCSR, which breaks the CCSR relocation code. To fix this, we resize the boot page TLB so that it only covers the 4KB boot page. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: verify the current address of CCSR before relocating itTimur Tabi
Verify that CCSR is actually located where it is supposed to be before we relocate it. This is useful in detecting U-Boot configurations that are broken (e.g. an incorrect value for CONFIG_SYS_CCSRBAR_DEFAULT). If the current value is wrong, we enter an infinite loop, which is handy for debuggers. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: add some missing sync instructions in the CCSR relocation codeTimur Tabi
Calls to tlbwe and tlbsx should be preceded with an isync/msync pair. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: fix some comments in the CCSR relocation codeTimur Tabi
Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/85xx: fix definition of MAS register macrosTimur Tabi
Some of the MAS register macros do not protect the parameter with parentheses, which could cause wrong values if the parameter includes operators. Also fix the definition of TSIZE_TO_BYTES() so that it actually uses the parameter. This hasn't caused any problems to date because the parameter was always been 'tsize'. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129chenhui zhao
Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-08Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc83xx: powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds powerpc/mpc83xx: Add 512MB DDR support for mpc8360emds mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code mpc83xx: Cleanup usage of LBC constants mpc83xx: Cleanup usage of DDR constants mpc83xx: Cleanup usage of BAT constants mpc83xx: cosmetic: vme8349.h checkpatch compliance mpc83xx: cosmetic: ve8313.h checkpatch compliance mpc83xx: cosmetic: sbc8349.h checkpatch compliance mpc83xx: cosmetic: mpc8308_p1m.h checkpatch compliance mpc83xx: cosmetic: kmeter1.h checkpatch compliance mpc83xx: cosmetic: TQM834x.h checkpatch compliance mpc83xx: cosmetic: SIMPC8313.h checkpatch compliance mpc83xx: cosmetic: MVBLM7.h checkpatch compliance mpc83xx: cosmetic: MPC837XERDB.h checkpatch compliance mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8360ERDK.h checkpatch compliance mpc83xx: cosmetic: MPC8360EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance mpc83xx: cosmetic: MPC8349EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC832XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8315ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8313ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8308RDB.h checkpatch compliance mpc83xx: cosmetic: MERGERBOX.h checkpatch compliance mpc83xx: Fix ipic structure definition powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions cosmetic, powerpc, mpc83xx: checkpatch cleanup powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c mpc83xx: fix global timer structure definition
2011-11-07arch/powerpc/cpu/mpc8260/spi.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: spi.c: In function 'spi_init_r': spi.c:279:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] spi.c: In function 'spi_xfer': spi.c:361:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/bat_rw.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: bat_rw.c: In function 'write_bat': bat_rw.c:38:6: warning: variable 'batn' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andy Fleming <afleming@gmail.com>
2011-11-07mpc8220/i2c.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: i2c.c: In function 'wait_for_bb': i2c.c:109:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8260/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: i2c.c: In function 'i2c_init': i2c.c:221:26: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] i2c.c:221:19: warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8260/i2c.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Also accept some other harmless checkpatch warnings. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8220/fec.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fec.c: In function 'mpc8220_fec_recv': fec.c:733:8: warning: variable 'frame' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8260/speed.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: speed.c: In function 'get_clocks': speed.c:113:30: warning: variable 'cpmdf' set but not used [-Wunused-but-set-variable] speed.c:113:23: warning: variable 'busdf' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/spi.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: spi.c: In function 'spi_init_f': spi.c:144:21: warning: variable 'iop' set but not used [-Wunused-but-set-variable] spi.c:142:22: warning: variable 'cpi' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: WOlfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8xx/i2c.c: CodungStyle cleanupWolfgang Denk
Make (mostly) checkpatch-clean We don't acctually change the code (like convert to use I/O accessors), so there will be some remaining "Use of volatile" warnings from checkpatch. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8xx/cpu.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: cpu.c: In function 'check_CPU': cpu.c:188:8: warning: variable 'mid' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/fec.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: fec.c: In function 'fec_pin_init': fec.c:381:18: warning: variable 'fecp' set but not used [-Wunused-but-set-variable] fec.c: In function 'fec8xx_miiphy_write': fec.c:1013:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Note: The code was slightly rearranged, but no functional changes attempted, i. e. no conversion to use I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/cpu/mpc5xxx/usb_ohci.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:751:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/board.c: fix build warningWolfgang Denk
Fix: board.c: In function 'board_init_r': board.c:633:8: warning: unused variable 's' [-Wunused-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/board.c: make (mostly) checkpatch-cleanWolfgang Denk
CodingStyle cleanup. Accepted (in this cleanup) checkpatch messages: - externs should be avoided (to be cleaned up later) - no spaces at the start of a line (accepted in multi-line #if's) - Macros with complex values (false reports) - do not use assignment in if condition (accepted in one place, where avoiding it would have required an additional level of nesting, resulting in less readable code) Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/cpu/mpc5xxx/i2c.c: fix GC 4.6 build warningsWolfgang Denk
Fix: i2c.c: In function 'wait_for_bb': i2c.c:104:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
generated by cgit (git 2.34.1) at 2024-12-27 01:02:31 +0000