summaryrefslogtreecommitdiff
path: root/arch/sandbox/dts
AgeCommit message (Collapse)Author
2020-08-25pci: pci-uclass: Add multi entry support for memory regionsSuneel Garapati
Enable PCI memory regions in ranges property to be of multiple entry. This helps to add support for SoC's like OcteonTX/TX2 where every peripheral is on PCI bus. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-22sandbox: dts: Add compatible string for bind-test nodePatrice Chotard
Usage of lists_bind_fdt() in bind command imposes to add a compatible string for bind-test node. Others impacts are: - bind-test node is binded at sandbox start, so no need to bind it in test_bind_unbind_with_node() test. - As explained just above, after sandbox start, now a phy exist. In test/dm/phy.c, it was verified that a third phy didn't exist, now we must verified that a fourth phy doesn't exist. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20i2c: eeprom: Use reg property instead of offset and sizeMichal Simek
Remove adhoc dt binding for fixed-partition definition for i2c eeprom. fixed-partition are using reg property instead of offset/size pair. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-28test/py: add tests for the button commandsPhilippe Reynes
Adds tests for the button commands. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28sandbox: dtsi: add buttonsPhilippe Reynes
Adds two buttons on sandbox so button framework may be tested. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28sandbox, test: change hog gpioPhilippe Reynes
Since commit 9ba84329dc45 ("sandbox, test: add test for GPIO_HOG function"), the gpio_a 0,1,2 and 3 are used by hog in test.dts. But 2 leds 'sandbox:red' and 'sandbox:green' are using gpio_a 0 and 1. As hog always request his gpios, the led command on both led is broken: => led sandbox:red LED 'sandbox:red' not found (err=-16) The gpio is already requested by hog, so it can't be enabled for led 'sandbox:red'. This commit change the gpio used by hog to 10, 11, 12 and 13, so the led command could be used again with 'sandbox:red' and 'sandbox:green'. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-25test: Add tests for SOC uclassDave Gerlach
Add a sandbox SOC driver, and some tests for the SOC uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20test: Add tests for SOC uclassDave Gerlach
Add a sandbox SOC driver, and some tests for the SOC uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-17dm: acpi: Enhance acpi_get_name()Simon Glass
For many device types it is possible to figure out the name just by looking at its uclass or parent. Add a function to handle this, since it allows us to cover the vast majority of cases automatically. However it is sometimes impossible to figure out an ACPI name for a device just by looking at its uclass. For example a touch device may have a vendor-specific name. Add a new "acpi,name" property to allow a custom name to be created. With this new feature we can drop the get_name() methods in the sandbox I2C and SPI drivers. They were only added for testing purposes. Update the tests to use the new values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for DSDT generationSimon Glass
Some devices need to inject extra code into the Differentiated System Descriptor Table (DSDT). Add a method to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in inject_dsdt() comments] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support ordering SSDT data by deviceSimon Glass
Add a /chosen property to control the order in which the data appears in the SSDT. This allows matching up U-Boot's output from a dump of the known-good data obtained from within Linux. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for SSDT generationSimon Glass
Some devices need to generate code for the Secondary System Descriptor Table (SSDT). Add a method to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support copying properties from device tree to ACPISimon Glass
Some drivers in Linux support both device tree and ACPI. U-Boot itself uses Linux device-tree bindings for its own configuration but does not use ACPI. It is convenient to copy these values over to the ACPI DP table for passing to linux. Add some convenience functions to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add a function to get a device path and scopeSimon Glass
Add a function to build up the ACPI path for a device and another for its scope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-06Merge branch 'next'Tom Rini
Merge all outstanding changes from the current next branch in now that we have released.
2020-07-05sandbox, test: add test for GPIO_HOG functionHeiko Schocher
currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality. For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01reset: Add generic reset driverSean Anderson
This patch adds a generic reset driver. It is designed to be useful when one has a register in a regmap which contains bits that reset other devices. I thought this seemed like a very generic use, so here is a generic driver. The overall structure has been modeled on the syscon-reboot driver. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01dm: Add support for simple-pm-busSean Anderson
This type of bus is used in Linux to designate buses which have power domains and/or clocks which need to be enabled before their child devices can be used. Because power domains are automatically enabled before probing in U-Boot, we just need to enable any clocks present. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11dm: uclass: don't assign aliased seq numbersMichael Walle
If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com> Tested-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11usb: provide a device tree node to USB devicesMichael Walle
It is possible to specify a device tree node for an USB device. This is useful if you have a static USB setup and want to use aliases which point to these nodes, like on the Raspberry Pi. The nodes are matched against their hub port number, the compatible strings are not matched for now. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11test: dm: update test for open-drain/open-source emulation in gpio-uclassNeil Armstrong
Add tests for testing open-drain/open-source emulation in gpio-uclass. It also adds two test3-gpios configured as GPIO_ACTIVE_LOW. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-02test: dm: phy: add a test item for the phy_bulk APIChunfeng Yun
Add a test item for the phy_bulk API Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02test: dm: add test item for ofnode_get_child_count()Chunfeng Yun
Add a test item for ofnode_get_child_count() Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-30acpi: Add a method to write tables for a deviceSimon Glass
A device may want to write out ACPI tables to describe itself to Linux. Add a method to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-16test: pinmux: add pincontrol-gpio for pin configurationPatrick Delaunay
Add a simple pincontrol associated to the sandbox gpio driver, that allows to check pin configuration with the command pinmux. The pinmux test is also updated to test behavior with 2 pincontrols. Example to check LED pin configuration: => pinmux list | Device | Driver | Parent | pinctrl-gpio | sandbox_pinctrl_gpio | root_driver | pinctrl | sandbox_pinctrl | root_driver => pinmux dev pinctrl-gpio => pinmux status a0 : gpio input . a1 : gpio input . a2 : gpio input . a3 : gpio input . a4 : gpio input . a5 : gpio output . a6 : gpio output . ... Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16test: dm: update test for pins configuration in gpioPatrick Delaunay
Add tests for new API set_dir_flags and set_dir_flags and associated code in gpio uclass. Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE GPIO_PULL_UP and GPIO_PULL_DOWN. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16gpio: sandbox: cleanup binding supportPatrick Delaunay
Cleanup binding support, use the generic binding by default (test u-class gpio_xlate_offs_flags function) and add specific binding for added value. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16test: dm: update test for pins configuration in pinctrl nodePatrick Delaunay
Add test for "pins" configuration in gpio uclass with set_state() ops and test for generic parsing of pinconf_param array). set_state() is called by: - pinctrl_generic_set_state |- pinctrl_generic_set_state_subnode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16Merge tag 'dm-pull-10apr20-take2' of git://git.denx.de/u-boot-dmTom Rini
Functions for reading indexed values from device tree Enhancements to 'dm' command Log test enhancements and syslog driver DM change to read parent ofdata before children Minor fixes
2020-04-16dm: core: support reading a single indexed u32 valueDario Binacchi
The patch adds helper functions to allow reading a single indexed u32 value from a device-tree property containing multiple u32 values, that is an array of integers. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dm: test: add test case for dev_read_u64 functionDario Binacchi
Add test case to cover dev_read_u64 and dev_read_u64_default functions. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16sandbox: add reserved-memory node in device treeHeinrich Schuchardt
For testing the handling of memory reservations create a reserved-memory node in sandbox.dts and sandbox64.dts. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2020-04-16sandbox: Update PCI nodes in dts filesTom Rini
The way the PCI nodes are written today causes a number of warnings if we stop disabling some of the warnings we pass to DTC. As these warnings aren't disabled in current Linux Kernel builds, we should aim to not disable them here either, so rewrite these slightly. Update the driver model doc as well. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-16acpi: Add a simple sandbox testSimon Glass
Add a sandbox test for the basic ACPI functionality we have so far. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-07dm: irq: Add support for requesting interruptsSimon Glass
At present driver model supports the IRQ uclass but there is no way to request a particular interrupt for a driver. Add a mechanism, similar to clock and reset, to read the interrupts required by a device from the device tree and to request those interrupts. U-Boot itself does not have interrupt-driven handlers, so just provide a means to read and clear an interrupt. This can be useful to handle peripherals which must use an interrupt to determine when data is available, for example. Bring over the basic binding file as well, from Linux v5.4. Note that the older binding is not supported in U-Boot; the newer 'special form' must be used. Add a simple test of the new functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-05sandbox: Support changing the LCD colour depthSimon Glass
Add a new device-tree property to control the colour depth. At present we support 16bpp and 32bpp. While we are here, update the code to use livetree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05dm: core: Add ofnode_get_chosen_prop()Simon Glass
Add a function to read a property from the chosen node, providing access to its length. Update ofnode_get_chosen_string() to make use of it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Rename ofnode_get_chosen_prop()Simon Glass
This function is actually intended to read a string rather than a property. All of its current callers use it that way. Also there is no way to return the length of the property from this function. Rename it to better indicate its purpose, using ofnode_read as the prefix since this matches most other functions. Also add some tests which are missing for these functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-07dm: test: Add a test driver for devresSimon Glass
Add a driver which does devres allocations so that we can write tests for devres. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07sandbox: rng: Add a random number generator(rng) driverSughosh Ganu
Add a sandbox driver for random number generation. Mostly aimed at providing a unit test for rng uclass. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-15sandbox: Add a test for IRQSimon Glass
Add a simple sandbox test for this uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15sandbox: Add PCI driver and test for p2sbSimon Glass
Add a sandbox driver and PCI-device emulator for p2sb. Also add a test which uses a simple 'adder' driver to test the p2sb functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: sandbox: Add a PMC emulator and testSimon Glass
Add a simple PMC for sandbox to permit tests to run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-10sandbox: add missing compatible property in device treeHeinrich Schuchardt
In the device tree UEFI unit test the compatible property of the device is read. Provide the missing property. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-22test: clk: test clock self assignmentJean-Jacques Hiblot
Make sure that the clock self-assignment works by having a clock of clk-sbox be configured automatically when clk-sbox is probed. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22test: clk: Update tests to also check the managed APIJean-Jacques Hiblot
Add a few more clocks the clk_sandbox clock provider and get them using the managed API. Make sure they are released when the device is removed. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-15sandbox: fix cpu property in test.dts for pytestAKASHI Takahiro
When I tried to run some new efi tests with pytest, efi_smbios_register() triggered a segmentation fault. Here is the location where it happened: efi_init_obj_list() efi_smbios_register() write_smbios_table() smbios_write_type4() smbios_write_type4_dm() where dev_get_parent_platdata() should return a pointer to struct cpu_platdata, but it is actually NULL because any cpu device on sandbox is attached to "root_driver." With this patch, this issue will be fixed by moving all the definitions of cpus under "cpus" node so that they have a "cpu_bus" parent. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-25 08:36:07 +0000