uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2015-07-14	dm: x86: baytrail: Correct PCI region 3 when driver model is used	Simon Glass
2015-07-14	dm: x86: minnowmax: Move PCI to use driver model	Simon Glass
2015-07-14	x86: pci: Tidy up the generic x86 PCI driver	Simon Glass
2015-07-14	x86: queensbay: Change CPU_ADDR_BITS to 32	Bin Meng
2015-07-14	x86: Setup fixed range MTRRs for legacy regions	Bin Meng
2015-07-14	x86: queensbay: Change PCIe root ports' interrupt routing	Bin Meng
2015-07-14	x86: Remove inline for lapic access routines	Bin Meng
2015-07-14	x86: Add I/O APIC register access routines	Bin Meng
2015-07-14	x86: Reduce PIRQ routing table size	Bin Meng
2015-07-14	x86: Ignore function number when writing PIRQ routing table	Bin Meng
2015-07-14	x86: Write correct bus number for the irq router	Bin Meng
2015-07-14	x86: Clean up lapic codes	Bin Meng
2015-07-14	x86: Move lapic_setup() call into init_bsp()	Bin Meng
2015-07-14	x86: Move MP initialization codes into a common place	Bin Meng
2015-07-14	x86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONS	Bin Meng
2015-07-14	x86: dm: Clean up cpu drivers	Bin Meng
2015-07-14	x86: fsp: Move FspInitEntry call to board_init_f()	Bin Meng
2015-07-14	x86: fsp: Load GDT before calling FspInitEntry	Bin Meng
2015-07-14	x86: Add Kconfig options to be used by arch/x86/cpu/config.mk	Bin Meng
2015-06-04	x86: baytrail: pci region 3 is not always mapped to end of ram	Andrew Bradford
2015-06-04	x86: qemu: Implement PIRQ routing	Bin Meng
2015-06-04	x86: coreboot: Control I/O port 0xb2 writing via device tree	Bin Meng
2015-06-04	x86: coreboot: Fix cosmetic issues	Bin Meng
2015-06-04	x86: qemu: Adjust VGA initialization	Bin Meng
2015-06-04	x86: qemu: Enable legacy IDE I/O ports decode	Bin Meng
2015-06-04	x86: qemu: Turn on legacy segments decode	Bin Meng
2015-06-04	x86: Do sanity test on pirq table before writing	Bin Meng
2015-06-04	x86: quark: Implement PIRQ routing	Bin Meng
2015-06-04	x86: Refactor PIRQ routing support	Bin Meng
2015-06-04	x86: qemu: Add graphics support	Bin Meng
2015-06-04	x86: Support QEMU x86 targets	Bin Meng
2015-04-30	x86: Add a CPU driver for baytrail	Simon Glass
2015-04-30	x86: Allow CPUs to be set up after relocation	Simon Glass
2015-04-30	x86: Add multi-processor init	Simon Glass
2015-04-29	x86: Provide access to the IDT	Simon Glass
2015-04-29	x86: Store the GDT pointer in global_data	Simon Glass
2015-04-29	x86: Disable -Werror	Simon Glass
2015-04-29	x86: Remove unwanted MMC debugging	Simon Glass
2015-04-29	x86: quark: Use reset_cpu()	Simon Glass
2015-04-29	x86: ivybridge: Use reset_cpu()	Simon Glass
2015-04-29	x86: Implement reset_cpu() correctly for modern CPUs	Simon Glass
2015-04-29	x86: link: Add PCH driver to support SPI Flash	Simon Glass
2015-04-29	x86: quark: Turn on legacy segments decode	Bin Meng
2015-04-29	x86: queensbay: Implement PIRQ routing	Bin Meng
2015-04-29	x86: Write configuration tables in last_stage_init()	Bin Meng
2015-04-29	x86: Add a function to assign IRQ numbers to PCI device	Bin Meng
2015-04-29	x86: queensbay: Avoid using PCH prefix	Bin Meng
2015-04-18	Kconfig: Move CONFIG_BOOTSTAGE to Kconfig	Simon Glass
2015-04-18	x86: chromebook_link: dts: Add PCH and LPC devices	Simon Glass
2015-04-18	dm: x86: Add a uclass for a Platform Controller Hub	Simon Glass