summaryrefslogtreecommitdiff
path: root/arch/x86/dts/conga-qeval20-qa3-e3845.dts
AgeCommit message (Collapse)Author
2019-04-12x86: dts: switch spi-flash to jedec, spi-nor compatibleNeil Armstrong
The x86 code and DT uses "spi-flash" to detect a flash node, switch to "jedec,spi-nor" in the DTS files and in fdtdec by switching the GENERIC_SPI_FLASH value to to jedec,spi-nor. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-20x86: Switch to use DM sysreset driverBin Meng
This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-30x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dtsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-05x86: baytrail: Change lpe/lpss-sio/scc FSP properties to integerBin Meng
At present lpe/lpss-sio/scc FSP properties are all boolean, but in fact for "enable-lpe" it has 3 possible options. This adds macros for these options and change the property from a boolean type to an integer type, and change their names to explicitly indicate what the property is really for. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: baytrail: Use macros instead of magic numbers for FSP settingsBin Meng
Introduce various meaningful macros for FSP settings and switch over to use them instead of magic numbers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1Bin Meng
The default value of "fsp,mrc-init-tseg-size" should be 1 (1MB) per FSP default settings. 0 is not valid. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-17x86: ich6_gpio: Add use-lvl-write-cache for I/O access modeBin Meng
Add a device-tree property use-lvl-write-cache that will cause writes to lvl to be cached instead of read from lvl before each write. This is required on some platforms that have the register implemented as dual read/write (such as Baytrail). Prior to this fix the blue USB port on the Minnowboard Max was unusable since USB_HOST_EN0 was set high then immediately set low when USB_HOST_EN1 was written. This also resolves the 'gpio clear | set' command warning like: "Warning: value of pin is still 0" Signed-off-by: George McCollister <george.mccollister@gmail.com> <rebased on latest origin/master, fixed all baytrail boards> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-16x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config codeStefan Roese
This patch includes the following changes: - Remove Designware I2C support from dts as its not used - Configure SMBus PADs in dts - Enable I2C commands and I2C support - Configure SMSC2513 USB hub via SMBus upon startup - Move environment location to match Minnowmax example - Enhancement of the default environment Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-06-12x86: baytrail: Configure card detect pin of the SD controllerBin Meng
As of today, the latest version FSP (gold4) for BayTrail misses the PAD configuration of the SD controller's Card Detect signal. The default PAD value for the CD pin sets the pin to work in GPIO mode, which causes card detect status cannot be reflected by the Present State register in the SD controller (bit 16 & bit 18 are always zero). Add a configuration for this pin in the pinctrl node. Note I've checked the PAD configuration for all the pins in all the 3 controllers (eMMC/SDIO/SD). Only this SDMMC3_CD_B pin does not get initialized to correct mode by FSP. With fsp,emmc-boot-mode set to 2 (eMMC 4.1), eMMC pins are initialized to func 1, but if we set fsp,emmc-boot-mode to 1 (auto), those pins are initialized to func 3 which is correct according to datasheet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12x86: baytrail: Change fsp, emmc-boot-mode to "auto"Bin Meng
At present all BayTrail boards configure fsp,emmc-boot-mode to 2, which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1 only shows up on some early stepping silicon of BayTrail SoC. Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP provides a config option fsp,emmc-boot-mode which tells FSP which eMMC controller it initializes. Instead of hardcoded to 2, now we change it to 1 which means "auto". With this change, MinnowMax board (with a D0 stepping BayTrail SoC) can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot 'pci' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12x86: baytrail: Add 'reg' property in the pinctrl nodeBin Meng
Without a 'reg' property, pinctrl driver probe routine fails in its pre_probe() with a return value of -EINVAL. Add 'reg' property for all BayTrail boards. Note for BayleyBay, the pinctrl node is newly added. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23x86: Use latest microcode for all BayTrail boardsBin Meng
Update board device tree to include latest microcode, and remove the old no longer needed microcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2016-05-23x86: dts: Update to include ACTL register detailsBin Meng
This updates all x86 boards that currently have IRQ router in the dts files to include ACTL register details. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-17x86: Add congatec conga-QA3/E3845-4G (Bay Trail) supportStefan Roese
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>