summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2016-12-26x86: Add file names from Kconfig in CMC/FSP/VGA nodes in u-boot.dtsiBin Meng
Since we already have a bunch of Kconfig options for CMC/FSP/VGA file names, add these from Kconfig in the corresponding dts nodes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-26x86: quark: Fix build error for quark-based boardsBin Meng
With the conversion to use binman to build x86 boards, Intel Galileo board does not build anymore due to missing ucode entry. In fact ucode is not needed for quark-based boards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20x86: Use binman all x86 boardsSimon Glass
Change x86 boards to use binman to produce the ROM. This involves adding the image definition to the device tree and using it in the Makefile. The existing ifdtool features are no-longer needed. Note that the u-boot.dtsi file is common and is used for all x86 boards which use microcode. A separate emulation-u-boot-dtsi is used for the others. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-12-02libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORYMasahiro Yamada
Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_FIXUP_FDT option") allows us to skip memory setup of DTB, but a problem for ARM is that spin_table_update_dt() and psci_update_dt() are skipped as well if CONFIG_ARCH_FIXUP_FDT is disabled. This commit allows us to skip only fdt_fixup_memory_banks() instead of the whole of arch_fixup_fdt(). It will be useful when we want to use a memory node from a kernel DTB as is, but need some fixups for Spin-Table/PSCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build error for x86: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-27efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf
Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-17ls2080: Exit dpaa only right before exiting U-BootAlexander Graf
On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
2016-11-14efi: x86: Adjust EFI files support efi_loaderSimon Glass
Add compiler flags and make a few minor adjustments to support the efi loader. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Add Kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14x86: Move efi .S files into the 'lib' directorySimon Glass
These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14x86: Move efi .lds files into the 'lib' directorySimon Glass
These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14x86: Correct a build warning in x86 tablesSimon Glass
There is a build warning for three x86 boards since write_smbios_table_wrapper() is not used. Fix it. Fixes: e824cf3f (smbios: Allow compilation on 64bit systems) Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2016-10-19 Highlights this time around: - Add run time service (power control) support for PSCI (fixed in v3) - Add efi gop pointer exposure - SMBIOS support for EFI (on ARM) - efi pool memory unmap support (needed for 4.8) - initial x86 efi payload support (fixed up in v2) - various bug fixes Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/tables_csum.h
2016-10-19x86: efi: Add EFI loader support for x86Simon Glass
Add the required pieces to support the EFI loader on x86. Since U-Boot only builds for 32-bit on x86, only a 32-bit EFI application is supported. If a 64-bit kernel must be booted, U-Boot supports this directly using FIT (see doc/uImage.FIT/kernel.its). U-Boot can act as a payload for both 32-bit and 64-bit EFI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-19cpu: Add get_vendor callbackAlexander Graf
The CPU udevice already has a few callbacks to retreive information about the currently running CPUs. This patch adds a new get_vendor() call that returns the vendor of the main CPUs. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-19cpu: Add DMTF id and family fieldsAlexander Graf
For SMBIOS tables we need to know the CPU family as well as CPU IDs. This patches allocates some space for them in the cpu device and populates it on x86. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-19smbios: Allow compilation on 64bit systemsAlexander Graf
The SMBIOS generation code passes pointers as u32. That causes the compiler to warn on casts to pointers. This patch moves all address pointers to uintptr_t instead. Technically u32 would be enough for the current SMBIOS2 style tables, but we may want to extend the code to SMBIOS3 in the future which is 64bit address capable. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: Move smbios generation into arch independent directoryAlexander Graf
We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-19x86: Move table csum into separate fileAlexander Graf
We need the checksum function without all the other table functionality soon, so let's split it out into its own C file. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-18x86: Add implementations of setjmp() and longjmp()Simon Glass
Bring in these functions from Linux v4.4. They will be needed for EFI loader support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-18x86: Move table csum into separate headerAlexander Graf
We need the checksum function without all the other table functionality soon, so let's split it out into its own header file. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-13libfdt: Bring in upstream stringlist functionsSimon Glass
These have now landed upstream. The naming is different and in one case the function signature has changed. Update the code to match. This applies the following upstream commits by Thierry Reding <treding@nvidia.com> : 604e61e fdt: Add functions to retrieve strings 8702bd1 fdt: Add a function to get the index of a string 2218387 fdt: Add a function to count strings Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: coreboot: Convert to use DM coreboot video driverBin Meng
This converts coreboot to use DM framebuffer driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11x86: mrccache: Fix error handling in mrccache_get_region()Simon Glass
This should return normal errors, not device-tree errors. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Drop unused init_helper functionsSimon Glass
Drop init_bd_struct_r() which is no-longer used. Also drop the declaration for init_func_spi() since this is now handled by generic board init. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Tidy up enable_clock_gating() for 64-bitSimon Glass
Fix the hex case and remove unused brackets. Use ~0U instead of ~0UL to allow compilation on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Fix PCH power setupSimon Glass
At present pch_power_options() has the arguments to writel() around the wrong way. Fix this and update it to compile on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Correct address casts in interrupt codeSimon Glass
We should cast an address to unsigned long, not u32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Correct address casts in cpu codeSimon Glass
We should cast an address to unsigned long, not u32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Allow interrupts to be disabled in 64-bit modeSimon Glass
Update the code to support both 32-bit and 64-bit modes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: x86: Move link to use driver model for videoSimon Glass
Update the configuration to use the new driver. Drop the existing plumbing code and unused header files. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: x86: Move samus to use new driver model supportSimon Glass
Update the samus driver to avoid the direct call to the video BIOS setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Add an accelerated memmove() functionSimon Glass
Bring in a faster memmove() from Linux 4.7. This speeds up scrolling on the display. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Fix Linux v4.7+ zimage booting (update bootparam.h)Stefan Roese
Booting Linux kernel v4.7+ does not work since Linux kernel commit 974f221c "x86/boot: Move compressed kernel to the end of the decompression buffer". This patch adds the latest version of the setup_header struct, adding "init_size" which is needed since this commit referenced above. With this patch, booting Linux v4.8-rc8 does work again on x86 boards. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: baytrail: Add 2nd eMMC controller to the PCI probe listStefan Roese
With this addition, the eMMC device available on the congatec and DFI BayTrail SoM is detected correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-01input: specify the default of I8042_KEYB in more correct mannerMasahiro Yamada
Creating multiple entries of "config FOO" often gives us bad experiences. In this case, we should specify "default X86" as platforms that want this keyboard by default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-01sandbox, x86: select DM_KEYBOARD instead of default y entryMasahiro Yamada
Once we migrate to DM-based drivers, we cannot go back to legacy ones, i.e. config options like DM_* are not user-configurable. Make SANDBOX and X86 select DM_KEYBOARD like other platforms do. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23Remove arch/${ARCH}/include/asm/errno.hMasahiro Yamada
Unlike Linux, nothing about errno.h is arch-specific in U-Boot. As you see, all of arch/${ARCH}/include/asm/errno.h is just a wrapper of <asm-generic/errno.h>. Actually, U-Boot does not export headers to user-space, so we just have to care about the consistency in the U-Boot tree. Now all of include directives for <asm/errno.h> are gone. Deprecate <asm/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23x86: squash lines for immediate returnMasahiro Yamada
arch_cpu_init() can be simpler by this refactoring. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-30x86: efi: Fix EFI 64-bit payload build warningsBin Meng
There are lots of warnings when building EFI 64-bit payload. include/asm-generic/bitops/__fls.h:17:2: warning: left shift count >= width of type if (!(word & (~0ul << 32))) { ^ In fact, U-Boot itself as EFI payload is running in 32-bit mode. So BITS_PER_LONG needs to still be 32, but EFI status codes are 64-bit when booting from 64-bit EFI. Introduce EFI_BITS_PER_LONG to bridge those status codes with U-Boot's BITS_PER_LONG. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-30x86: Add debugging when cpu_common_init() failsSimon Glass
Add a debug() at this point to help figure out what is wrong. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-30x86: ivybridge: Allow microcode to be collatedSimon Glass
Generally the microcode is combined into a single block only (and removed from the device tree) when there are multiple blocks. But this is not a requirement. Adjust the ivybridge code to avoid assuming this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-30x86: Add debugging when a microcode update failsSimon Glass
Add a debug() at this point to help figure out what is wrong. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher<hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: Add theadorable-x86-dfi-bt700 board supportStefan Roese
This patch adds support for the BayTrail based theadorable-x86-dfi-bt700 board which uses the DFI BT700 BayTrail Qseven SoM on a custom baseboard. The main difference to the DFI baseboard is, that it isn't equipped with a Super IO chip and uses the internal HS SIO UART (memory mapped PCI based) as the console UART. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: Add DFI BT700 BayTrail board supportStefan Roese
This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config codeStefan Roese
This patch includes the following changes: - Remove Designware I2C support from dts as its not used - Configure SMBus PADs in dts - Enable I2C commands and I2C support - Configure SMSC2513 USB hub via SMBus upon startup - Move environment location to match Minnowmax example - Enhancement of the default environment Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)Stefan Roese
This patch adds support for the SMBus block read/write functionality. Other protocols like the SMBus quick command need to get added if this is needed. This patch also removed the SMBus related defines from the Ivybridge pch.h header. As they are integrated in this driver and should be used from here. This change is added in this patch to avoid compile breakage to keep the source git bisectable. Tested on a congatec BayTrail board to configure the SMSC2513 USB hub. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: George McCollister <george.mccollister@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-16x86: som-db5800-som-6867: fix SERIRQ on resetGeorge McCollister
Explicitly enable ILB_SERIRQ function 1 in cfio_regs_pad_ilb_serirq_PCONF0. Pad configuration for SERIRQ is not set to enable the SERIRQ function after a reset though strangely, it is on initial boot. Rebooting from Linux, reset command in u-boot and even pushing the reset button on the development board all lead to the SERIRQ function being disabled (address 0xfed0c560 with value of 0x2003cc80). Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: baytrail: Add SIO HS-UART clock setupStefan Roese
To support the BayTrail internal SIO HS UART, the internal UART clock needs to get configured. This patch adds support for this clock configuration which will be done, if the PCI device(s) are found. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: cache.h: Add default for CONFIG_SYS_CACHELINE_SIZEStefan Roese
Don't just define ARCH_DMA_MINALIGN but also CONFIG_SYS_CACHELINE_SIZE if it's undefined. This is needed for the xhci driver to compile. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-27dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass
Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-30 22:22:17 +0000